| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8a6646ac-2ba7-cc1b-b547-776fb263ccdd@siemens.com>
Date: Tue, 26 Jul 2016 21:50:37 +0200
From: Jan Kiszka <jan.kiszka@...mens.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-serial@...r.kernel.org
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: [PATCH] serial: 8250_pci: Use symbolic constants for EXAR's MPIO
registers
Less magics that only require comments.
Signed-off-by: Jan Kiszka <jan.kiszka@...mens.com>
---
drivers/tty/serial/8250/8250_pci.c | 42 +++++++++++++++++++-------------------
include/uapi/linux/serial_reg.h | 13 ++++++++++++
2 files changed, 34 insertions(+), 21 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index c1d4a8f..7f77060 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1796,18 +1796,18 @@ pci_xr17v35x_setup(struct serial_private *priv,
* Setup Multipurpose Input/Output pins.
*/
if (idx == 0) {
- writeb(0x00, p + 0x8f); /*MPIOINT[7:0]*/
- writeb(0x00, p + 0x90); /*MPIOLVL[7:0]*/
- writeb(0x00, p + 0x91); /*MPIO3T[7:0]*/
- writeb(0x00, p + 0x92); /*MPIOINV[7:0]*/
- writeb(0x00, p + 0x93); /*MPIOSEL[7:0]*/
- writeb(0x00, p + 0x94); /*MPIOOD[7:0]*/
- writeb(0x00, p + 0x95); /*MPIOINT[15:8]*/
- writeb(0x00, p + 0x96); /*MPIOLVL[15:8]*/
- writeb(0x00, p + 0x97); /*MPIO3T[15:8]*/
- writeb(0x00, p + 0x98); /*MPIOINV[15:8]*/
- writeb(0x00, p + 0x99); /*MPIOSEL[15:8]*/
- writeb(0x00, p + 0x9a); /*MPIOOD[15:8]*/
+ writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
+ writeb(0x00, p + UART_EXAR_MPIO3T_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOINV_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOSEL_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOOD_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOINT_15_8);
+ writeb(0x00, p + UART_EXAR_MPIOLVL_15_8);
+ writeb(0x00, p + UART_EXAR_MPIO3T_15_8);
+ writeb(0x00, p + UART_EXAR_MPIOINV_15_8);
+ writeb(0x00, p + UART_EXAR_MPIOSEL_15_8);
+ writeb(0x00, p + UART_EXAR_MPIOOD_15_8);
}
writeb(0x00, p + UART_EXAR_8XMODE);
writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
@@ -1843,20 +1843,20 @@ pci_fastcom335_setup(struct serial_private *priv,
switch (priv->dev->device) {
case PCI_DEVICE_ID_COMMTECH_4222PCI335:
case PCI_DEVICE_ID_COMMTECH_4224PCI335:
- writeb(0x78, p + 0x90); /* MPIOLVL[7:0] */
- writeb(0x00, p + 0x92); /* MPIOINV[7:0] */
- writeb(0x00, p + 0x93); /* MPIOSEL[7:0] */
+ writeb(0x78, p + UART_EXAR_MPIOLVL_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOINV_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOSEL_7_0);
break;
case PCI_DEVICE_ID_COMMTECH_2324PCI335:
case PCI_DEVICE_ID_COMMTECH_2328PCI335:
- writeb(0x00, p + 0x90); /* MPIOLVL[7:0] */
- writeb(0xc0, p + 0x92); /* MPIOINV[7:0] */
- writeb(0xc0, p + 0x93); /* MPIOSEL[7:0] */
+ writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
+ writeb(0xc0, p + UART_EXAR_MPIOINV_7_0);
+ writeb(0xc0, p + UART_EXAR_MPIOSEL_7_0);
break;
}
- writeb(0x00, p + 0x8f); /* MPIOINT[7:0] */
- writeb(0x00, p + 0x91); /* MPIO3T[7:0] */
- writeb(0x00, p + 0x94); /* MPIOOD[7:0] */
+ writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
+ writeb(0x00, p + UART_EXAR_MPIO3T_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOOD_7_0);
}
writeb(0x00, p + UART_EXAR_8XMODE);
writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index 1e5ac4e7..d176448 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -376,5 +376,18 @@
#define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */
#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */
+#define UART_EXAR_MPIOINT_7_0 0x8f /* MPIOINT[7:0] */
+#define UART_EXAR_MPIOLVL_7_0 0x90 /* MPIOLVL[7:0] */
+#define UART_EXAR_MPIO3T_7_0 0x91 /* MPIO3T[7:0] */
+#define UART_EXAR_MPIOINV_7_0 0x92 /* MPIOINV[7:0] */
+#define UART_EXAR_MPIOSEL_7_0 0x93 /* MPIOSEL[7:0] */
+#define UART_EXAR_MPIOOD_7_0 0x94 /* MPIOOD[7:0] */
+#define UART_EXAR_MPIOINT_15_8 0x95 /* MPIOINT[15:8] */
+#define UART_EXAR_MPIOLVL_15_8 0x96 /* MPIOLVL[15:8] */
+#define UART_EXAR_MPIO3T_15_8 0x97 /* MPIO3T[15:8] */
+#define UART_EXAR_MPIOINV_15_8 0x98 /* MPIOINV[15:8] */
+#define UART_EXAR_MPIOSEL_15_8 0x99 /* MPIOSEL[15:8] */
+#define UART_EXAR_MPIOOD_15_8 0x9a /* MPIOOD[15:8] */
+
#endif /* _LINUX_SERIAL_REG_H */
--
2.1.4
Powered by blists - more mailing lists