| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1469562619-21705-3-git-send-email-fancer.lancer@gmail.com>
Date: Tue, 26 Jul 2016 22:50:18 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: jdmason@...zu.us
Cc: dave.jiang@...el.com, Allen.Hubbe@....com, Xiangliang.Yu@....com,
Sergey.Semin@...latforms.ru, linux-ntb@...glegroups.com,
linux-kernel@...r.kernel.org, Serge Semin <fancer.lancer@...il.com>
Subject: [PATCH 2/3] ntb: IDT 89HPES*NT* PCIe-switches NTB device driver
IDT 89HPES*NT* PCIe-switches are the multi-port switches, which can be
configured to have more than two NT-functions, connected to each other.
Using these facility NT-function of local RC can access any NT-functions of
others. This driver implements Port-to-Ports architecture, so only Primary
port can have access to prededefined number of Secondary ports. Secondary
ports on the other hand can access the primary port memory only. The ports
hierarchy is configured using NTSDATA register of each NT-function, which
should be preinitialized with corresponding Primary port ID. Then driver will
evenly split the IDT PCIe-switch Doorbell and Memory Window resources between
all of the NT-function pairs, and add the corresponding devices to the NTB bus.
The NTSDATA register preinitialization can be done either by EEPROM or by linux
kernel PCI fixup interface. The default value is zero, so the port 0 is
considered being primary, the others are secondary.
The supported IDT PCIe-switches do not implement synchronous interface to
access Memory Windows configuration registers. There is no way to exclusively
access a peer translated base addresses Lookup Table. Instead the messaging
subsystem can be used to post the translated base address to a peer, so one
could properly initialize the table. In order to resolve the race conditions of
possible concurrent messages transfer by parallel tasks and different root
complexes, the ntb_msg_post() method places messages into the outbound messages
queue. An extra kernel work thread is used to perform an actual message
transfer with a constant frequency of attempts. If kernel thread fails to send
a message after a constant number of tries, then the corresponding client
driver is notified by rising the ntb_msg_event() method with NTB_MSG_FAIL
status. Additionaly there is a special tasklet, which reads messages from
incoming message registers and puts them into the inbound messages queue.
An another kernel thread is then started to deliver a message to a
corresponding client driver.
There are only 32 Global doorbell bits, which can be routed between any two
NT-functions. So the driver evenly distributes doorbell bits between all the
NT-function pairs. Of course it is not always possible being equally done, so
depending on the NT Primary/Secondary topology, one pair can have greater
number of Doorbell bits than another. The difference cannot exceed for more
than one bit.
IDT 89HPES*NT* PCIe-switches don't have Scrathpad registers, so the
corresponding callback methods are unsupported.
There are three DebugFS nodes, which can be used to debug the driver:
1. /sys/kernel/debug/ntb_hw_idt/ntbA{N}/info - contain a general information
about the local IDT NTB driver and NT-function, like port, partition, role
(primary or secondary) and number of connected peers, a link status, of all
the locally available pairs, global and local doorbell registers status,
doorbells mapping, NTB mapping table, chip teperature and many others.
2. /sys/kernel/debug/ntb_hw_idt/ntbA{N}/ntregs - debug file to print the state
of local NT-function registers. Thanks to the "enum-switch-case-macro" pattern
it can be easily done just by one loop.
3. /sys/kernel/debug/ntb_hw_idt/ntbA{N}/swregs - debug file to print the state
of PCIe-swtich global registers.
The detailed description of the driver design and source code navigation
can be found in the header of drivers/ntb/hw/idt/ntb_hw_idt.c file.
NOTE IDT 89HPES12NT3 PCIe-switch is not supported by this driver, since it has
synchronous interface.
Signed-off-by: Serge Semin <fancer.lancer@...il.com>
---
drivers/ntb/hw/Kconfig | 1 +
drivers/ntb/hw/Makefile | 6 +-
drivers/ntb/hw/idt/Kconfig | 21 +
drivers/ntb/hw/idt/Makefile | 5 +
drivers/ntb/hw/idt/ntb_hw_idt.c | 4050 ++++++++++++++++++++++++++++++++
drivers/ntb/hw/idt/ntb_hw_idt.h | 390 +++
drivers/ntb/hw/idt/ntb_hw_idt_quirks.c | 163 ++
drivers/ntb/hw/idt/ntb_hw_idt_quirks.h | 114 +
drivers/ntb/hw/idt/ntb_hw_idt_regmap.h | 877 +++++++
9 files changed, 5625 insertions(+), 2 deletions(-)
create mode 100644 drivers/ntb/hw/idt/Kconfig
create mode 100644 drivers/ntb/hw/idt/Makefile
create mode 100644 drivers/ntb/hw/idt/ntb_hw_idt.c
create mode 100644 drivers/ntb/hw/idt/ntb_hw_idt.h
create mode 100644 drivers/ntb/hw/idt/ntb_hw_idt_quirks.c
create mode 100644 drivers/ntb/hw/idt/ntb_hw_idt_quirks.h
create mode 100644 drivers/ntb/hw/idt/ntb_hw_idt_regmap.h
diff --git a/drivers/ntb/hw/Kconfig b/drivers/ntb/hw/Kconfig
index 7116472..a89243c 100644
--- a/drivers/ntb/hw/Kconfig
+++ b/drivers/ntb/hw/Kconfig
@@ -1,2 +1,3 @@
source "drivers/ntb/hw/amd/Kconfig"
+source "drivers/ntb/hw/idt/Kconfig"
source "drivers/ntb/hw/intel/Kconfig"
diff --git a/drivers/ntb/hw/Makefile b/drivers/ntb/hw/Makefile
index 532e085..5d438ea 100644
--- a/drivers/ntb/hw/Makefile
+++ b/drivers/ntb/hw/Makefile
@@ -1,2 +1,4 @@
-obj-$(CONFIG_NTB_AMD) += amd/
-obj-$(CONFIG_NTB_INTEL) += intel/
+obj-$(CONFIG_NTB_AMD) += amd/
+obj-$(CONFIG_NTB_IDT) += idt/
+obj-$(CONFIG_NTB_IDT_QUIRKS) += idt/
+obj-$(CONFIG_NTB_INTEL) += intel/
diff --git a/drivers/ntb/hw/idt/Kconfig b/drivers/ntb/hw/idt/Kconfig
new file mode 100644
index 0000000..45b2b01
--- /dev/null
+++ b/drivers/ntb/hw/idt/Kconfig
@@ -0,0 +1,21 @@
+config NTB_IDT
+ tristate "IDT PCIe-switch Non-Transparent Bridge support"
+ depends on PCI
+ help
+ This driver supports NTB of cappable IDT PCIe-switches.
+
+ If unsure, say N.
+
+# BAR's early enable quirks
+config NTB_IDT_QUIRKS
+ bool "Enable PCI fixups built-in kernel for IDT PCIe-switch"
+ depends on NTB_IDT
+ default y if NTB_IDT=y
+ select PCI_QUIRKS # NTB_IDT depends on PCI so it's ok to force quirks
+ help
+ There are some configurations of IDT PCIe-switch which must be made
+ before the kernel PCI subsystem starts bus-devices scan and
+ initialization. For instance, the corresponding NT-function BARs must
+ be enabled. This option builds the fixups into the kernel to bypass
+ the basic IDT quirks.
+
diff --git a/drivers/ntb/hw/idt/Makefile b/drivers/ntb/hw/idt/Makefile
new file mode 100644
index 0000000..3adcd9b
--- /dev/null
+++ b/drivers/ntb/hw/idt/Makefile
@@ -0,0 +1,5 @@
+# Driver core
+obj-$(CONFIG_NTB_IDT) += ntb_hw_idt.o
+
+# BAR's early activation quirk
+obj-$(CONFIG_NTB_IDT_QUIRKS) += ntb_hw_idt_quirks.o
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.c b/drivers/ntb/hw/idt/ntb_hw_idt.c
new file mode 100644
index 0000000..0db1a4a
--- /dev/null
+++ b/drivers/ntb/hw/idt/ntb_hw_idt.c
@@ -0,0 +1,4050 @@
+/*
+ * This file is provided under a GPLv2 license. When using or
+ * redistributing this file, you may do so under that license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (C) 2016 T-Platforms All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, one can be found <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * IDT PCIe-switch NTB Linux driver
+ *
+ * Contact Information:
+ * Serge Semin <fancer.lancer@...il.com>, <Sergey.Semin@...latforms.ru>
+ */
+
+/*
+ * NOTE of the IDT PCIe-switch NT-function driver design.
+ * Here is presented some lirics about the NT-functions of the IDT PCIe-switch
+ * and the driver concept.
+ *
+ * There are a lot of different architectures or configurations the IDT
+ * PCIe-switch can be placed into, like NT Bridge-to-Bridge, Port-to-Port,
+ * Ports-to-Ports, Port-to-Ports, etc. But there is always BUT! Here it is.
+ * But the problem is that the PCIe-switch resources are not balanced enough
+ * to create efficient, the most comprehensive driver for Ports-to-Ports
+ * configuration. Here is what each IDT PCIe-switch have (IDT family of
+ * PCIe-switch solutions):
+ * - up to 24 Memory Windows per each port (incredibly a lot comparing to the
+ * Intel and AMD controllers)
+ * - one 32 bits Doorbell register shared amongst all the ports (Why IDT, why
+ * would you do that? Why so few?!)
+ * - 4 Message registers per each port (IDT, thanks at least for that...)
+ * - No Scratchpad registers (Surprise, huh?!)
+ *
+ * Since there are no scratchpad registers integrated in the IDT family PCI
+ * ExpressR switches, the tradition synchronous Linux NTB device can't be
+ * implemented (unlike Intel and AMD controllers, that are strictly synchronous).
+ * Instead the Messaging mechanism should be used to exchange the necessary
+ * informatin among the NT-functions. It leads to the asynchronous
+ * interface since there is no easy way to pass the address of the locally
+ * allocated shared memory window to the opposite NT-function. It can only be
+ * done by sending a message, which must be correcly handled by a peer. If one
+ * is looking for strictly synchronous solutions, then it's better to use Intel
+ * and AMD controllers. Regarding the IDT PreciseTM family of PCI ExpressR
+ * switches, they actually support both synchronous (scratchpads) and
+ * asynchronous (message registers) interfaces, but there is no suitable driver
+ * to use them in Linux.
+ *
+ * Lets get back to the actual driver architecture. Since there are no enough
+ * doorbell registers and after a lot of thoughts of the possible sidewalks to
+ * bypass the PCIe-switch limitations we came to the conclusion, that the best
+ * architecture of the driver using as much resources as possible would be the
+ * Port-to-Port/Port-to-Ports one. Shortly speaking it implies the only one
+ * NT-function being able to communicate with all the other NT-functions
+ * simultaniously. Suppose there are eight ports working as NT-bridge, then the
+ * Primary port would have 7 devices on the NTB bus, but the Secondary ports
+ * will expose just one device. As one can see it also perfectly fits the
+ * Primary-Secondary topology of the Linux NTB bus. The NTSDATA registers must
+ * be preinitialized with the corresponding Primary side port numbers. It is the
+ * way how the NTB topology can be configurated. For instance, suppose there are
+ * only two NT-functions enabled on the IDT PCIe-switch ports 0 and 2, where
+ * port 2 is chosen to be the primary one. Then all NTSDATA of the both
+ * NT-functions must be preinitialized with value 2. Similarly the topology with
+ * several Primary ports can be created.
+ *
+ * Howto study the code below.
+ * Here is the content of the driver:
+ * 1. IDT PCIe-switch registers IO-functions
+ * 2. Synchronization methods: atomic queue ops
+ * 3. Link status operations
+ * 4. Memory Window subsystem
+ * 5. Doorbells subsystem
+ * 6. Messaging subsystem
+ * 7. IRQ-related functions
+ * 8. NTB bus initialization
+ * 9. IDT NT-functions topology
+ * 10. Basic initialization functions
+ * 11. DebugFS callback functions
+ * 12. PCI bus callback functions
+ *
+ * I would recommend to start from the chapter "1. IDT PCIe-switch registers
+ * IO-functions". Since there are a lot of registers must be initialized before
+ * the switch starts working, it's better to have the register addresses and
+ * the corresponding values being collected at some structured table.
+ * Particulary one can find these tables in ntb_hw_idt_regmap.h file as the set
+ * of preprocessor macro-functions. Regarding the chapter 1 in this file, it
+ * resides the basic functions used to create the NT-functions and Switch Global
+ * registers table and the registers fields table. There are also r/w functions
+ * determined in there.
+ *
+ * Since there are list structures used to handle in and out messages, then
+ * there has to be managed synchronous access to those lists. Therefore the
+ * operations with message queues are made atomic in chapter "2. Synchronization
+ * methods: atomic queue ops".
+ *
+ * Then I would get stright to the chapter "12. PCI bus callback functions",
+ * which perform the algorithm of the PCI-bus device basic initialzation.
+ * Particulary it checks whether the kernel supports IDT PCIe-switch NTB
+ * devices, allocates the necessary structures, initialize the PCI-related
+ * fields, scans the IDT PCIe-switch NT-functions topology, adds all the
+ * available peers, initalizes doorbells, memory windows and messaging
+ * subsystem, starts link polling work-thread, initialize the interrupt
+ * handlers and finally registers the NTB devices on the NTB linux kernel bus.
+ *
+ * The basic PCI-bus device initialization and data structures allocation are
+ * performed by means of methods defined in the chapter "10. Basic
+ * initialization functions". NTB topology scanning is made by function from
+ * the chapter "9. IDT NT-functions topology".
+ *
+ * The NTB basic interfaces like Link event handlers, memory windows, doorbells
+ * and messages subsystems are described in the chapters 3 - 6 with corresponding
+ * titles. They traditionally consist of helpers, initializing/deinitializing
+ * functions and particular NTB devices kernel driver methods. These kernel
+ * driver methods - are callback functions used to register the new devices on
+ * the linux kernel NTB bus defined in the chapter "8. NTB bus initialization".
+ */
+
+/*#define DEBUG*/
+
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/sizes.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/ntb.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/debugfs.h>
+
+#include "ntb_hw_idt.h"
+#include "ntb_hw_idt_regmap.h"
+#include "ntb_hw_idt_quirks.h"
+
+#define NTB_NAME "ntb_hw_idt"
+#define NTB_DESC "IDT PCI-E Non-Transparent Bridge Driver"
+#define NTB_VER "1.0"
+#define NTB_IRQNAME "idt_ntb_irq"
+#define NTB_WQNAME "idt_ntb_wq"
+#define NTB_CACHENAME "idt_ntb_cache"
+
+MODULE_DESCRIPTION(NTB_DESC);
+MODULE_VERSION(NTB_VER);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("T-platforms");
+
+/*
+ * Wrapper dev_err/dev_warn/dev_info/dev_dbg macros
+ */
+#define dev_err_ndev(ndev, args...) \
+ dev_err(to_dev_ndev(ndev), ## args)
+#define dev_err_data(data, args...) \
+ dev_err(to_dev_data(data), ## args)
+#define dev_warn_ndev(ndev, args...) \
+ dev_warn(to_dev_ndev(ndev), ## args)
+#define dev_warn_data(data, args...) \
+ dev_warn(to_dev_data(data), ## args)
+#define dev_info_ndev(ndev, args...) \
+ dev_info(to_dev_ndev(ndev), ## args)
+#define dev_info_data(data, args...) \
+ dev_info(to_dev_data(data), ## args)
+#define dev_dbg_ndev(ndev, args...) \
+ dev_dbg(to_dev_ndev(ndev), ## args)
+#define dev_dbg_data(data, args...) \
+ dev_dbg(to_dev_data(data), ## args)
+
+/*
+ * NT Endpoint ports table with the corresponding pcie link status, signal data,
+ * control and status registers
+ */
+static struct idt_ntb_port portdata_tbl[IDT_NTB_MAXPORTS_CNT] = {
+/*0*/ {IDT_SW_PCI_NTP0_CMD, IDT_SW_PCI_NTP0_PCIELSTS,
+ IDT_SW_PCI_NTP0_NTSDATA, IDT_SW_PCI_NTP0_NTGSIGNAL,
+ IDT_SW_PCI_SWPORT0CTL, IDT_SW_PCI_SWPORT0STS},
+/*1*/ {0},
+/*2*/ {IDT_SW_PCI_NTP2_CMD, IDT_SW_PCI_NTP2_PCIELSTS,
+ IDT_SW_PCI_NTP2_NTSDATA, IDT_SW_PCI_NTP2_NTGSIGNAL,
+ IDT_SW_PCI_SWPORT2CTL, IDT_SW_PCI_SWPORT2STS},
+/*3*/ {0},
+/*4*/ {IDT_SW_PCI_NTP4_CMD, IDT_SW_PCI_NTP4_PCIELSTS,
+ IDT_SW_PCI_NTP4_NTSDATA, IDT_SW_PCI_NTP4_NTGSIGNAL,
+ IDT_SW_PCI_SWPORT4CTL, IDT_SW_PCI_SWPORT4STS},
+/*5*/ {0},
+/*6*/ {IDT_SW_PCI_NTP6_CMD, IDT_SW_PCI_NTP6_PCIELSTS,
+ IDT_SW_PCI_NTP6_NTSDATA, IDT_SW_PCI_NTP6_NTGSIGNAL,
+ IDT_SW_PCI_SWPORT6CTL, IDT_SW_PCI_SWPORT6STS},
+/*7*/ {0},
+/*8*/ {IDT_SW_PCI_NTP8_CMD, IDT_SW_PCI_NTP8_PCIELSTS,
+ IDT_SW_PCI_NTP8_NTSDATA, IDT_SW_PCI_NTP8_NTGSIGNAL,
+ IDT_SW_PCI_SWPORT8CTL, IDT_SW_PCI_SWPORT8STS},
+/*9*/ {0},
+/*10*/ {0},
+/*11*/ {0},
+/*12*/ {IDT_SW_PCI_NTP12_CMD, IDT_SW_PCI_NTP12_PCIELSTS,
+ IDT_SW_PCI_NTP12_NTSDATA, IDT_SW_PCI_NTP12_NTGSIGNAL,
+ IDT_SW_PCI_SWPORT12CTL, IDT_SW_PCI_SWPORT12STS},
+/*13*/ {0},
+/*14*/ {0},
+/*15*/ {0},
+/*16*/ {IDT_SW_PCI_NTP16_CMD, IDT_SW_PCI_NTP16_PCIELSTS,
+ IDT_SW_PCI_NTP16_NTSDATA, IDT_SW_PCI_NTP16_NTGSIGNAL,
+ IDT_SW_PCI_SWPORT16CTL, IDT_SW_PCI_SWPORT16STS},
+/*17*/ {0},
+/*18*/ {0},
+/*19*/ {0},
+/*20*/ {IDT_SW_PCI_NTP20_CMD, IDT_SW_PCI_NTP20_PCIELSTS,
+ IDT_SW_PCI_NTP20_NTSDATA, IDT_SW_PCI_NTP20_NTGSIGNAL,
+ IDT_SW_PCI_SWPORT20CTL, IDT_SW_PCI_SWPORT20STS},
+/*21*/ {0},
+/*22*/ {0},
+/*23*/ {0}
+};
+
+/*
+ * IDT PCIe-switch partitions table with the corresponding control, status
+ * and messages control registers
+ */
+static struct idt_ntb_part partdata_tbl[IDT_NTB_MAXPARTS_CNT] = {
+/*0*/ { IDT_SW_PCI_SWPART0CTL, IDT_SW_PCI_SWPART0STS,
+ {IDT_SW_PCI_SWP0MSGCTL0, IDT_SW_PCI_SWP0MSGCTL1,
+ IDT_SW_PCI_SWP0MSGCTL2, IDT_SW_PCI_SWP0MSGCTL3} },
+/*1*/ { IDT_SW_PCI_SWPART1CTL, IDT_SW_PCI_SWPART1STS,
+ {IDT_SW_PCI_SWP1MSGCTL0, IDT_SW_PCI_SWP1MSGCTL1,
+ IDT_SW_PCI_SWP1MSGCTL2, IDT_SW_PCI_SWP1MSGCTL3} },
+/*2*/ { IDT_SW_PCI_SWPART2CTL, IDT_SW_PCI_SWPART2STS,
+ {IDT_SW_PCI_SWP2MSGCTL0, IDT_SW_PCI_SWP2MSGCTL1,
+ IDT_SW_PCI_SWP2MSGCTL2, IDT_SW_PCI_SWP2MSGCTL3} },
+/*3*/ { IDT_SW_PCI_SWPART3CTL, IDT_SW_PCI_SWPART3STS,
+ {IDT_SW_PCI_SWP3MSGCTL0, IDT_SW_PCI_SWP3MSGCTL1,
+ IDT_SW_PCI_SWP3MSGCTL2, IDT_SW_PCI_SWP3MSGCTL3} },
+/*4*/ { IDT_SW_PCI_SWPART4CTL, IDT_SW_PCI_SWPART4STS,
+ {IDT_SW_PCI_SWP4MSGCTL0, IDT_SW_PCI_SWP4MSGCTL1,
+ IDT_SW_PCI_SWP4MSGCTL2, IDT_SW_PCI_SWP4MSGCTL3} },
+/*5*/ { IDT_SW_PCI_SWPART5CTL, IDT_SW_PCI_SWPART5STS,
+ {IDT_SW_PCI_SWP5MSGCTL0, IDT_SW_PCI_SWP5MSGCTL1,
+ IDT_SW_PCI_SWP5MSGCTL2, IDT_SW_PCI_SWP5MSGCTL3} },
+/*6*/ { IDT_SW_PCI_SWPART6CTL, IDT_SW_PCI_SWPART6STS,
+ {IDT_SW_PCI_SWP6MSGCTL0, IDT_SW_PCI_SWP6MSGCTL1,
+ IDT_SW_PCI_SWP6MSGCTL2, IDT_SW_PCI_SWP6MSGCTL3} },
+/*7*/ { IDT_SW_PCI_SWPART7CTL, IDT_SW_PCI_SWPART7STS,
+ {IDT_SW_PCI_SWP7MSGCTL0, IDT_SW_PCI_SWP7MSGCTL1,
+ IDT_SW_PCI_SWP7MSGCTL2, IDT_SW_PCI_SWP7MSGCTL3} }
+};
+
+/*
+ * DebugFS directory to place the driver debug file
+ */
+static struct dentry *dbgfs_topdir;
+
+/*===========================================================================
+ * 1. IDT PCIe-switch registers IO-functions
+ *===========================================================================*/
+
+static void __idt_nt_writereg(void __iomem *cfg_mmio, const ptrdiff_t regoffset,
+ const enum idt_ntb_regsize regsize, const u32 val);
+static u32 __idt_nt_readreg(void __iomem *cfg_mmio, const ptrdiff_t regoffset,
+ const enum idt_ntb_regsize regsize);
+static void __idt_sw_writereg(void __iomem *cfg_mmio, const ptrdiff_t regoffset,
+ const enum idt_ntb_regsize regsize, const u32 val);
+static u32 __idt_sw_readreg(void __iomem *cfg_mmio, const ptrdiff_t regoffset,
+ const enum idt_ntb_regsize regsize);
+
+/*
+ * Registers IO contexts to perform the r/w operations either with NT-function
+ * registers or with the PCIe-switch Global registers. The context is chosen
+ * by the register type "enum idt_ntb_regtype"
+ */
+static struct idt_ntb_regctx regctx[2] = {
+ {.writereg = __idt_nt_writereg, .readreg = __idt_nt_readreg,
+ .iolock = __SPIN_LOCK_UNLOCKED(iolock)},
+ {.writereg = __idt_sw_writereg, .readreg = __idt_sw_readreg,
+ .iolock = __SPIN_LOCK_UNLOCKED(iolock)}
+};
+
+/*
+ * Internal function to set the value bits of a variable
+ */
+static inline u32 idt_ntb_setbits(u32 var, u32 mask, unsigned char offset, u32 val)
+{
+ return (var & ~(mask << offset)) | ((val & mask) << offset);
+}
+
+/*
+ * Internal function to retrieve the value bits of a variable
+ */
+static inline u32 idt_ntb_getbits(u32 var, u32 mask, unsigned char offset)
+{
+ return (var >> offset) & mask;
+}
+
+/*
+ * Retrieve the register type, address and size by the passed enumerated ID
+ * NOTE Compiler should produce the jump table for the subsequent switch-case
+ * statement which gives just simple o(1) complexity
+ */
+static int idt_ntb_regparams(const enum idt_ntb_cfgreg reg,
+ enum idt_ntb_regtype *type, ptrdiff_t *offset,
+ enum idt_ntb_regsize *size, const char **desc)
+{
+ const char *tmpdesc;
+
+ /* Determine the register type */
+ *type = (IDT_NTB_CFGREGS_SPLIT > reg) ? IDT_NT_REGTYPE : IDT_SW_REGTYPE;
+
+ /* Retrieve the register parameters by the enumerated ID */
+ switch (reg) {
+ IDT_NT_CFGREGS(PAIR_REGID_ACCESS, *offset, *size, tmpdesc)
+ IDT_SW_CFGREGS(PAIR_REGID_ACCESS, *offset, *size, tmpdesc)
+ default :
+ /* Got invalid register ID */
+ BUG();
+ return -EINVAL;
+ }
+
+ /* Return the pointer to the string with the register description
+ * only if the passed pointer isn't NULL*/
+ if (NULL != desc) {
+ *desc = tmpdesc;
+ }
+
+ return SUCCESS;
+}
+
+/*
+ * Retrieve the registers fields parameters like the register id, mask
+ * and offset
+ * NOTE Compiler should produce the jump table for the subsequent switch-case
+ * statement which gives just simple o(1) complexity
+ */
+static int idt_ntb_fldparams(const enum idt_ntb_regfld fld,
+ enum idt_ntb_cfgreg *reg,
+ u32 *mask, unsigned char *offset)
+{
+ /* Retrieve the field parameters by the enumerated ID */
+ switch (fld) {
+ IDT_NT_REGFLDS(PAIR_FLDID_ACCESS, *reg, *mask, *offset)
+ IDT_SW_REGFLDS(PAIR_FLDID_ACCESS, *reg, *mask, *offset)
+ default :
+ /* Got invalid register field ID */
+ BUG();
+ return -EINVAL;
+ }
+ return SUCCESS;
+}
+
+/*
+ * Set the corresponding field of the passed variable
+ */
+static void idt_ntb_writefld_var(u32 *var, const enum idt_ntb_regfld fld,
+ const u32 val)
+{
+ enum idt_ntb_cfgreg reg;
+ unsigned char bitoffset;
+ u32 mask;
+
+ /* Retrieve the field parameters */
+ idt_ntb_fldparams(fld, ®, &mask, &bitoffset);
+
+ /* Init the corresponding bits of the passed variable */
+ *var = idt_ntb_setbits(*var, mask, bitoffset, val);
+}
+
+/*
+ * Get the corresponding field of the passed variable
+ */
+static u32 idt_ntb_readfld_var(u32 var, const enum idt_ntb_regfld fld)
+{
+ enum idt_ntb_cfgreg reg;
+ unsigned char bitoffset;
+ u32 mask;
+
+ /* Retrieve the field parameters */
+ idt_ntb_fldparams(fld, ®, &mask, &bitoffset);
+
+ /* Retrieve the corresponding field of the variable */
+ return idt_ntb_getbits(var, mask, bitoffset);
+}
+
+/*
+ * NT-function registers basic write function
+ *
+ * WARNING! Our target platform is Big Endian, but PCI registers are always
+ * Little endian. So corresponding write{w,l} operations must have
+ * embedded endiannes conversion. If your platform doesn't have it,
+ * the driver won't properly work.
+ */
+static void __idt_nt_writereg(void __iomem *cfg_mmio, const ptrdiff_t regoffset,
+ const enum idt_ntb_regsize regsize, const u32 val)
+{
+ /* Perform fast IO operation */
+ switch (regsize) {
+ case REGBYTE:
+ writeb((u8)val, cfg_mmio + regoffset);
+ break;
+ case REGWORD:
+ writew((u16)val, cfg_mmio + regoffset);
+ break;
+ case REGDWORD:
+ writel((u32)val, cfg_mmio + regoffset);
+ break;
+ default:
+ /* Invalid register size was retrieved */
+ BUG();
+ break;
+ }
+}
+
+/*
+ * NT-function registers basic read function
+ *
+ * WARNING! Our target platform is Big Endian, but PCI registers are always
+ * Little endian. So corresponding read{w,l} operations must have
+ * embedded endiannes conversion. If your platform doesn't have it,
+ * the driver won't properly work.
+ */
+static u32 __idt_nt_readreg(void __iomem *cfg_mmio, const ptrdiff_t regoffset,
+ const enum idt_ntb_regsize regsize)
+{
+ u32 retval;
+
+ /* Perform fast IO operation */
+ switch (regsize) {
+ case REGBYTE:
+ retval = readb(cfg_mmio + regoffset);
+ break;
+ case REGWORD:
+ retval = readw(cfg_mmio + regoffset);
+ break;
+ case REGDWORD:
+ retval = readl(cfg_mmio + regoffset);
+ break;
+ default:
+ /* Invalid register size was retrieved */
+ BUG();
+ break;
+ }
+
+ return retval;
+}
+
+/*
+ * IDT PCIe-switch Global registers basic write function
+ *
+ * WARNING! Our target platform is Big Endian, but PCI registers are always
+ * Little endian. So corresponding write{w,l} operations must have
+ * embedded endiannes conversion. If your platform doesn't have it,
+ * the driver won't properly work.
+ * In addition the GASA* registers support the 4 bytes R/W operations
+ * so the data must be correspondingly shifted
+ */
+static void __idt_sw_writereg(void __iomem *cfg_mmio, const ptrdiff_t regoffset,
+ const enum idt_ntb_regsize regsize, const u32 val)
+{
+ u32 data, fldmask;
+ unsigned char fldoffset;
+
+ /* Post the IDT PCIe-switch register offset first */
+ writel((u32)regoffset, cfg_mmio + GASAADDR_OFFSET);
+
+ /* Read the data of the passed register, which offset is aligned with
+ * two last bits by the GASAADDR register */
+ data = readl(cfg_mmio + GASADATA_OFFSET);
+
+ /* Alter the corresponding field of the data with the passed value */
+ fldmask = GENMASK(BITS_PER_BYTE * regsize - 1, 0);
+ fldoffset = BITS_PER_BYTE * (regoffset & 0x3);
+ data = idt_ntb_setbits(data, fldmask, fldoffset, val);
+
+ /* Whatever the size of the register is, just write the value to the
+ * data register */
+ writel(data, cfg_mmio + GASADATA_OFFSET);
+}
+
+/*
+ * IDT PCIe-switch Global registers basic read function
+ */
+static u32 __idt_sw_readreg(void __iomem *cfg_mmio, const ptrdiff_t regoffset,
+ const enum idt_ntb_regsize regsize)
+{
+ u32 data, fldmask;
+ unsigned char fldoffset;
+
+ /* Post the IDT PCIe-switch register offset first */
+ writel((u32)regoffset, cfg_mmio + GASAADDR_OFFSET);
+
+ /* Read the data of the passed register, which offset is aligned with
+ * two last bits by the GASAADDR register */
+ data = readl(cfg_mmio + GASADATA_OFFSET);
+
+ /* Alter the corresponding field of the data with the passed value */
+ fldmask = GENMASK(BITS_PER_BYTE * regsize - 1, 0);
+ fldoffset = BITS_PER_BYTE * (regoffset & 0x3);
+ data = idt_ntb_getbits(data, fldmask, fldoffset);
+
+ /* Return the corresponding field of the register */
+ return data;
+}
+
+/*
+ * General function to perform the write operation to the register
+ */
+static void idt_ntb_writereg(void __iomem *cfg_mmio,
+ const enum idt_ntb_cfgreg reg, const u32 val)
+{
+ struct idt_ntb_regctx *curctx;
+ enum idt_ntb_regtype regtype;
+ ptrdiff_t regoffset;
+ enum idt_ntb_regsize regsize;
+ unsigned long irqflags;
+
+ /* Retrieve the register type, offset and size */
+ idt_ntb_regparams(reg, ®type, ®offset, ®size, NULL);
+
+ /* Get the current register context */
+ curctx = ®ctx[regtype];
+
+ /* Perform fast write operation */
+ spin_lock_irqsave(&curctx->iolock, irqflags);
+ curctx->writereg(cfg_mmio, regoffset, regsize, val);
+ spin_unlock_irqrestore(&curctx->iolock, irqflags);
+}
+
+/*
+ * General function to perform the read operation from the register
+ */
+static u32 idt_ntb_readreg(void __iomem *cfg_mmio, const enum idt_ntb_cfgreg reg)
+{
+ struct idt_ntb_regctx *curctx;
+ enum idt_ntb_regtype regtype;
+ ptrdiff_t regoffset;
+ enum idt_ntb_regsize regsize;
+ unsigned long irqflags;
+ u32 val;
+
+ /* Retrieve the register type, offset and size */
+ idt_ntb_regparams(reg, ®type, ®offset, ®size, NULL);
+
+ /* Get the current register context */
+ curctx = ®ctx[regtype];
+
+ /* Perform fast read operation */
+ spin_lock_irqsave(&curctx->iolock, irqflags);
+ val = curctx->readreg(cfg_mmio, regoffset, regsize);
+ spin_unlock_irqrestore(&curctx->iolock, irqflags);
+
+ return val;
+}
+
+/*
+ * General function to perform the write operation to the field of the register
+ */
+static void idt_ntb_writefld_mem(void __iomem *cfg_mmio,
+ const enum idt_ntb_regfld fld, const u32 val)
+{
+ struct idt_ntb_regctx *curctx;
+ enum idt_ntb_cfgreg reg;
+ enum idt_ntb_regsize regsize;
+ ptrdiff_t regoffset;
+ unsigned char bitoffset;
+ u32 mask, curval;
+ enum idt_ntb_regtype regtype;
+ unsigned long irqflags;
+
+ /* Retrieve the field parameters */
+ idt_ntb_fldparams(fld, ®, &mask, &bitoffset);
+
+ /* Retrieve the register offset and size */
+ idt_ntb_regparams(reg, ®type, ®offset, ®size, NULL);
+
+ /* Get the current register set context */
+ curctx = ®ctx[regtype];
+
+ /* Perform fast IO operations */
+ spin_lock_irqsave(&curctx->iolock, irqflags);
+ /* Retrieve the current value of the register */
+ curval = curctx->readreg(cfg_mmio, regoffset, regsize);
+ /* Set the corresponding bits in there */
+ curval = idt_ntb_setbits(curval, mask, bitoffset, val);
+ /* Write the register value back */
+ curctx->writereg(cfg_mmio, regoffset, regsize, val);
+ /* The critical section is over */
+ spin_unlock_irqrestore(&curctx->iolock, irqflags);
+}
+
+/*
+ * General function to perform the read operation from the field of the register
+ */
+static u32 idt_ntb_readfld_mem(void __iomem *cfg_mmio,
+ const enum idt_ntb_regfld fld)
+{
+ struct idt_ntb_regctx *curctx;
+ enum idt_ntb_cfgreg reg;
+ enum idt_ntb_regsize regsize;
+ ptrdiff_t regoffset;
+ unsigned char bitoffset;
+ u32 mask, curval;
+ enum idt_ntb_regtype regtype;
+ unsigned long irqflags;
+
+ /* Retrieve the field parameters */
+ idt_ntb_fldparams(fld, ®, &mask, &bitoffset);
+
+ /* Retrieve the register offset and size */
+ idt_ntb_regparams(reg, ®type, ®offset, ®size, NULL);
+
+ /* Get the current register set context */
+ curctx = ®ctx[regtype];
+
+ /* Perform fast IO operations */
+ spin_lock_irqsave(&curctx->iolock, irqflags);
+ /* Retrieve the current value of the register */
+ curval = curctx->readreg(cfg_mmio, regoffset, regsize);
+ /* The critical section is over */
+ spin_unlock_irqrestore(&curctx->iolock, irqflags);
+
+ return idt_ntb_getbits(curval, mask, bitoffset);
+}
+
+/*===========================================================================
+ * 2. Synchronization methods: atomic queue ops
+ *===========================================================================*/
+
+/*
+ * Initialize the atomic queue structure
+ */
+static inline void atomic_queue_init(queue_atomic_t *queue)
+{
+ /* Init the queue head */
+ INIT_LIST_HEAD(&queue->head);
+
+ /* Initialize the spin lock protecting the queue head */
+ spin_lock_init(&queue->lock);
+}
+
+/*
+ * Add item to the atomic queue at the first position
+ */
+static inline void atomic_queue_add(queue_atomic_t *queue,
+ struct list_head *new)
+{
+ unsigned long irqflags;
+
+ /* Lock the list add operation */
+ spin_lock_irqsave(&queue->lock, irqflags);
+ list_add(new, &queue->head);
+ spin_unlock_irqrestore(&queue->lock, irqflags);
+}
+
+/*
+ * Add item to the atomic queue tail
+ */
+static inline void atomic_queue_add_tail(queue_atomic_t *queue,
+ struct list_head *new)
+{
+ unsigned long irqflags;
+
+ /* Lock the list add tail operation */
+ spin_lock_irqsave(&queue->lock, irqflags);
+ list_add_tail(new, &queue->head);
+ spin_unlock_irqrestore(&queue->lock, irqflags);
+}
+
+/*
+ * Get the very first entry from the atomic queue
+ */
+static inline struct list_head *atomic_queue_get(queue_atomic_t *queue)
+{
+ struct list_head *entry;
+ unsigned long irqflags;
+
+ /* Lock the list entry delete operation */
+ spin_lock_irqsave(&queue->lock, irqflags);
+ if (!list_empty(&queue->head)) {
+ entry = queue->head.next;
+ list_del(entry);
+ } else /* if (entry != &queue->head) */ {
+ entry = NULL;
+ }
+ spin_unlock_irqrestore(&queue->lock, irqflags);
+
+ return entry;
+}
+
+/*
+ * Check whether the atomic queue is empty
+ */
+static inline bool atomic_queue_empty(queue_atomic_t *queue)
+{
+ unsigned long irqflags;
+ bool ret;
+
+ /* Lock the list empty operation */
+ spin_lock_irqsave(&queue->lock, irqflags);
+ ret = list_empty(&queue->head);
+ spin_unlock_irqrestore(&queue->lock, irqflags);
+
+ return ret;
+}
+
+/*===========================================================================
+ * 3. Link status operations
+ *===========================================================================*/
+
+/*
+ * Effectively enable the NTB link.
+ *
+ * From the moment of return from this function the inter-partition
+ * communications are enabled as well as translating Request and Complition TLPs.
+ * This function is called by the Primary side on the initialization phase. The
+ * Secondary ports can invoke it by calling the ntb_link_enable() callback.
+ */
+static void idt_ntb_link_effective_enable(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ u32 ntctl = 0, reqid, ntmtbldata = 0;
+
+ /* Retrieve the current complex Requester ID (Bus:Device:Function) */
+ reqid = idt_ntb_readfld_mem(cfg, IDT_NT_MTBL_REQID);
+
+ /* Set the corresponding NT Mapping table entry of port partition index
+ * with the data to perform the Request ID translation */
+ idt_ntb_writefld_var(&ntmtbldata, IDT_NT_MTBL_BDF, reqid);
+ idt_ntb_writefld_var(&ntmtbldata, IDT_NT_MTBL_PART, (u32)pdata->part);
+ idt_ntb_writefld_var(&ntmtbldata, IDT_NT_MTBL_VALID, ON);
+ idt_ntb_writereg(cfg, IDT_NT_PCI_NTMTBLADDR, (u32)pdata->part);
+ idt_ntb_writereg(cfg, IDT_NT_PCI_NTMTBLDATA, ntmtbldata);
+
+ /* Enable the ID protection and Completion TLPs translation */
+ idt_ntb_writefld_var(&ntctl, IDT_NT_IDPROTDIS, OFF);
+ idt_ntb_writefld_var(&ntctl, IDT_NT_CPEN, ON);
+ idt_ntb_writereg(cfg, IDT_NT_PCI_NTCTL, ntctl);
+
+ /* Enable the bus mastering, which effectively enables the Request TLPs
+ * translation and MSI IRQs generation */
+ pci_set_master(pdata->pdev);
+
+ /* The ndevs->lnk_sts variable is going to change in the work thread */
+}
+
+/*
+ * Effectively disable the NTB link.
+ *
+ * From the moment of return from this function the inter-partition
+ * communications are disabled.
+ */
+static void idt_ntb_link_effective_disable(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+
+ /* Disable the bus mastering, which effectively stops translating the
+ * Request TLPs across the boundary of local partition */
+ pci_clear_master(pdata->pdev);
+
+ /* Disable Completion TLPs */
+ idt_ntb_writefld_mem(cfg, IDT_NT_CPEN, OFF);
+
+ /* Disable the corresponding NT Mapping table entry */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_NTMTBLADDR, (u32)pdata->part);
+ idt_ntb_writereg(cfg, IDT_NT_PCI_NTMTBLDATA, (u32)OFF);
+
+ /* The ndevs->lnk_sts variable is going to change in the work thread */
+}
+
+/*
+ * Notify the peer device that the local side is ready.
+ *
+ * Since the Primary side can't enable/disable link by demand of the client
+ * driver, there should be some way to notify the opposite side, what the local
+ * client driver is installed and started working (by calling the
+ * ntb_enable_link method). So Global Signal register is used for that purpose.
+ */
+static void idt_ntb_link_notify(struct idt_ntb_dev *ndev)
+{
+ void __iomem *cfg = to_cfg_ndev(ndev);
+
+ /* Just write ON to the first bit of device NTGSIGNAL register
+ * It is available only using GASA* registers */
+ idt_ntb_writereg(cfg, portdata_tbl[ndev->port].ntgsignal, ON);
+}
+
+/*
+ * Clear the notification set before in the Global Signal Status register.
+ */
+static void idt_ntb_link_clear_notification(struct idt_ntb_dev *ndev)
+{
+ void __iomem *cfg = to_cfg_ndev(ndev);
+
+ /* Clear the Global Signal status bit of the device partition */
+ idt_ntb_writereg(cfg, IDT_SW_PCI_SEGSIGSTS, ((u32)1 << ndev->part));
+}
+
+/*
+ * Retrieve the current link status
+ */
+static int idt_ntb_link_status(struct idt_ntb_dev *ndev)
+{
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ void __iomem *cfg = to_cfg_ndev(ndev);
+ u32 localbme, peerbme, pciests, gsigsts;
+ unsigned int part;
+
+ /* Read the local Bus Master Enable status */
+ localbme = idt_ntb_readfld_mem(cfg, IDT_NT_BME);
+
+ /* Read the Global Signal Status bit related to the device partition */
+ gsigsts = idt_ntb_readreg(cfg, IDT_SW_PCI_SEGSIGSTS);
+ /* Retrieve the partition of the corresponding device */
+ part = (NTB_TOPO_PRI == pdata->role) ? ndev->part : pdata->part;
+ gsigsts = (gsigsts & ((u32)1 << part)) ? ON : OFF;
+
+ /* Read the peer Bus Master Enable status */
+ peerbme = idt_ntb_readreg(cfg, portdata_tbl[ndev->port].pcicmd);
+ peerbme = idt_ntb_readfld_var(peerbme, IDT_NT_BME);
+
+ /* Retrieve the peer port link status */
+ pciests = idt_ntb_readreg(cfg, portdata_tbl[ndev->port].sts);
+ pciests = idt_ntb_readfld_var(pciests, IDT_SW_PORT_LNKUP);
+
+ /* If Both BME fields are ON and PCIe data link is up then the NTB
+ * link is effectively up */
+ if (ON == pciests && ON == peerbme && ON == localbme && ON == gsigsts) {
+ return ON;
+ } /* else if (OFF == pciests || OFF == peerbme || Off == localbme ||
+ * OFF == gsigsts) {return OFF} */
+
+ return OFF;
+}
+
+/*
+ * Kernel thread polling the peer side link status by reading the corresponding
+ * PCIe link status register and NT Mapping table entry
+ */
+static void idt_ntb_poll_link_work(struct work_struct *work)
+{
+ struct idt_ntb_data *pdata = to_data_lnkwork(work);
+ struct idt_ntb_dev *ndev;
+ unsigned char id;
+ int curlnksts;
+
+ /* Walk through all available peers reading their status */
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ /* Get the current NTB device */
+ ndev = &pdata->ndevs[id];
+
+ /* Retrieve the current link status */
+ curlnksts = idt_ntb_link_status(ndev);
+
+ /* If the link status has changed then call the event handler */
+ if (curlnksts != ndev->lnk_sts) {
+ ndev->lnk_sts = curlnksts;
+ ntb_link_event(&ndev->ntb);
+ }
+ }
+
+ /* Reschedule the work */
+ (void)queue_delayed_work(pdata->idt_wq, &pdata->lnk_work,
+ IDT_NTB_LNKPOLL_TOUT);
+}
+
+/*
+ * Initialize NTB link subsystem
+ *
+ * NOTE This function is not used by the client driver but just for
+ * initialization
+ */
+static void idt_ntb_init_link(struct idt_ntb_data *pdata)
+{
+ unsigned char id;
+
+ /* Initialize all the peers link status with OFF */
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ pdata->ndevs[id].lnk_sts = OFF;
+ }
+
+ /* Enable the link if it's primary port */
+ if (NTB_TOPO_PRI == pdata->role) {
+ /* Clear all the Global Signal Status bits related to the
+ * locally available NTB device */
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ idt_ntb_link_clear_notification(&pdata->ndevs[id]);
+ }
+ /* Next function enables the whole link no matter which NTB
+ * device it's */
+ idt_ntb_link_effective_enable(pdata);
+ }
+
+ /* Initialize the delayed kernel thread polling the link status */
+ INIT_DELAYED_WORK(&pdata->lnk_work, idt_ntb_poll_link_work);
+ (void)queue_delayed_work(pdata->idt_wq, &pdata->lnk_work,
+ IDT_NTB_LNKPOLL_TOUT);
+
+ dev_dbg_data(pdata, "IDT NTB peer device link polling started");
+}
+
+/*
+ * Clear the link polling subsystem
+ *
+ * NOTE This function is not used by the client driver but just for
+ * final deinitialization
+ */
+static void idt_ntb_clear_link(struct idt_ntb_data *pdata)
+{
+ unsigned char id;
+
+ /* Stop the link status polling thread */
+ cancel_delayed_work_sync(&pdata->lnk_work);
+
+ /* Disable the link */
+ idt_ntb_link_effective_disable(pdata);
+
+ /* Clear all the Global Signal Status bits related to the
+ * Primary port available NTB device */
+ if (NTB_TOPO_PRI == pdata->role) {
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ idt_ntb_link_clear_notification(&pdata->ndevs[id]);
+ }
+ }
+
+ dev_dbg_data(pdata, "IDT NTB peer device link polling stopped");
+}
+
+/*
+ * NTB bus callback - get the current ntb link state
+ */
+static int idt_ntb_link_is_up(struct ntb_dev *ntb, enum ntb_speed *speed,
+ enum ntb_width *width)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ void __iomem *cfg = to_cfg_ndev(ndev);
+ u32 pcielsts;
+ int lnksts;
+
+ /* Get the curret link status */
+ lnksts = idt_ntb_link_status(ndev);
+
+ /* Retrieve the PCIe data link parameters */
+ if (ON == lnksts) {
+ /* Read the PCIe link status */
+ pcielsts = idt_ntb_readreg(cfg,
+ portdata_tbl[ndev->port].pcielsts);
+ /* The register values numerically match the enum values */
+ if (speed) {
+ *speed = idt_ntb_readfld_var(pcielsts, IDT_NT_CURLNKSPD);
+ }
+ if (width) {
+ *width = idt_ntb_readfld_var(pcielsts, IDT_NT_CURLNKWDTH);
+ }
+ } else /* if (OFF == lnksts) */ {
+ if (speed) {
+ *speed = NTB_SPEED_NONE;
+ }
+ if (width) {
+ *width = NTB_WIDTH_NONE;
+ }
+ }
+
+ return lnksts;
+}
+
+/*
+ * NTB bus callback - enable the link on the secondary side of the ntb
+ *
+ * NOTE Since there can be more than one pair of NTB devices (we use shared
+ * Lookup table) on the Primary port, the link must be always enabled from that
+ * side. So the next function fully works from the Secondary side only.
+ */
+static int idt_ntb_link_enable(struct ntb_dev *ntb, enum ntb_speed speed,
+ enum ntb_width width)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ void __iomem *cfg = pdata->cfg_mmio;
+
+ /* Primary port driver enables the link in the initialization method */
+ if (NTB_TOPO_PRI == ntb->topo) {
+ /* Notify the opposite side, that the link is enabled */
+ idt_ntb_link_notify(ndev);
+
+ dev_dbg_ndev(ndev, "IDT NT-function link is virtually enabled");
+
+ return -EINVAL;
+ }
+
+ /* Secondary ports can effectively enable the link on the local side */
+ idt_ntb_link_effective_enable(pdata);
+
+ /* Enable the interrupts of message, doorbells, switch and temperature
+ * sensor events. This will generate all the pending interrupts after the
+ * link is effectively enabled */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_NTINTMSK, NTINT_UNMASK);
+
+ dev_dbg_ndev(ndev, "IDT NT-function link is enabled");
+
+ return SUCCESS;
+}
+
+/*
+ * NTB bus callback - disable the link on the secondary side of the ntb
+ */
+static int idt_ntb_link_disable(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ void __iomem *cfg = pdata->cfg_mmio;
+
+ /* Primary port driver disables the link in the link clear method */
+ if (NTB_TOPO_PRI == ntb->topo) {
+ /* Notify the opposite side, that the link is disabled */
+ idt_ntb_link_clear_notification(ndev);
+
+ dev_dbg_ndev(ndev, "IDT NT-function link is virtually disabled");
+
+ return -EINVAL;
+ }
+
+ /* Disable the interrupts of message, doorbells, switch and temperature
+ * sensor events. This will stop generateing interrupts while link is
+ * down */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_NTINTMSK, NTINT_MASK);
+
+ /* Secondary ports can effectively disable the link on the local side */
+ idt_ntb_link_effective_disable(pdata);
+
+ dev_dbg_ndev(ndev, "IDT NT-function link is disabled");
+
+ return SUCCESS;
+}
+
+/*===========================================================================
+ * 4. Memory Window subsystem
+ *===========================================================================*/
+
+/*
+ * Find the Secondary port serial number (id) by the passed primary and
+ * secondary ports
+ */
+static inline unsigned char idt_ntb_findid(struct idt_ntb_topo *topo,
+ unsigned char pri, unsigned char sec)
+{
+ return hweight32(topo->secports[pri] & (((u32)1 << sec) - 1));
+}
+
+/*
+ * Initialize the PCI device BAR2(3:x64) setup register
+ */
+static int idt_ntb_setup_bar2(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ phys_addr_t limit;
+ int ret;
+
+ /* Request the PCI resources for the BAR2(3) */
+ ret = pci_request_region(pdata->pdev, BAR2, NTB_NAME);
+ if (SUCCESS != ret) {
+ dev_err_data(pdata,
+ "Failed to request the PCI BAR2(3) resources");
+ return ret;
+ }
+
+ /* Retrieve the physical address of the mapped by the Lookup table
+ * shared memory - BAR2(3) */
+ pdata->mw_base = pci_resource_start(pdata->pdev, BAR2);
+
+ /* Limit the BAR2 address with resepect to the Lookup table boundary */
+ /* Calculate the size of just one Memory Window */
+ pdata->mw_size = pci_resource_len(pdata->pdev, BAR2)/32;
+
+ /* Find the limit address */
+ limit = pdata->mw_base + IDT_NTB_MW_CNT * pdata->mw_size - 1;
+
+ /* Set the BAR size limiting register */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_BARLIMIT2, (u32)limit);
+#ifdef CONFIG_64BIT
+ idt_ntb_writereg(cfg, IDT_NT_PCI_BARLIMIT3, (u32)(limit >> 32));
+#endif /* CONFIG_64BIT */
+
+ return SUCCESS;
+}
+
+/*
+ * Deinitialize the PCI device BAR2(3:x64) setup register
+ */
+static void idt_ntb_clean_bar2(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ u32 limit = -1;
+
+ /* Set the BAR size limiting register */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_BARLIMIT2, limit);
+#ifdef CONFIG_64BIT
+ idt_ntb_writereg(cfg, IDT_NT_PCI_BARLIMIT3, limit);
+#endif /* CONFIG_64BIT */
+
+ /* Just write the disabled BARSETUP0 */
+ pci_release_region(pdata->pdev, BAR2);
+}
+
+/*
+ * Set the Memory Window translation address for the passed peer NTB device
+ */
+static int idt_ntb_setmw(struct idt_ntb_dev *ndev, const int mwindx,
+ const dma_addr_t addr)
+{
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ void __iomem *cfg = to_cfg_ndev(ndev);
+ u32 lut_indxbar = 0, lut_partval = 0;
+ unsigned long irqflags;
+
+ /* Return error if the passed memory window index is out of range */
+ if (mwindx >= ndev->mw_self_cnt) {
+ dev_err_ndev(ndev,
+ "Invalid Memory Window index specified to set");
+ return -EINVAL;
+ }
+
+ /* Return error if the passed address is not aligned with the four
+ * bytes */
+ if (!IS_ALIGNED(addr, IDT_NTB_TRANSALIGN)) {
+ dev_err_ndev(ndev, "Translated base address is not aligned");
+ return -EINVAL;
+ }
+
+ /* Collect the Lookup table offset */
+ idt_ntb_writefld_var(&lut_indxbar, IDT_NT_LUT_INDEX,
+ ndev->mw_self_offset + mwindx);
+ idt_ntb_writefld_var(&lut_indxbar, IDT_NT_LUT_BAR, BAR2);
+
+ /* Collect the Lookup table entry partition and valid bits */
+ idt_ntb_writefld_var(&lut_partval, IDT_NT_LUT_PART, ndev->part);
+ idt_ntb_writefld_var(&lut_partval, IDT_NT_LUT_VALID, ON);
+
+ /* Start critical section writing to the local port Lookup table */
+ spin_lock_irqsave(&pdata->lut_lock, irqflags);
+ /* Write the data to the Lookup table registers of the peer */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_LUTOFFSET, lut_indxbar);
+ idt_ntb_writereg(cfg, IDT_NT_PCI_LUTLDATA, (u32)addr);
+#ifdef CONFIG_64BIT
+ idt_ntb_writereg(cfg, IDT_NT_PCI_LUTMDATA, (u32)(addr >> 32));
+#else
+ idt_ntb_writereg(cfg, IDT_NT_PCI_LUTMDATA, (u32)0);
+#endif /* !CONFIG_64BIT */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_LUTUDATA, lut_partval);
+ /* Finally unlock the Lookup table */
+ spin_unlock_irqrestore(&pdata->lut_lock, irqflags);
+
+ return SUCCESS;
+}
+
+/*
+ * Set the Memory Window translation address for the passed peer NTB device
+ */
+static int idt_ntb_unsetmw(struct idt_ntb_dev *ndev, const int mwindx)
+{
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ void __iomem *cfg = to_cfg_ndev(ndev);
+ u32 lut_indxbar = 0, lut_partval = 0;
+ unsigned long irqflags;
+
+ /* Return Error if the passed Memory Window index is out of range */
+ if (mwindx >= ndev->mw_self_cnt) {
+ dev_err_ndev(ndev,
+ "Invalid Memory Window index specified to unset");
+ return -EINVAL;
+ }
+
+ /* Collect the Lookup table offset */
+ idt_ntb_writefld_var(&lut_indxbar, IDT_NT_LUT_INDEX,
+ ndev->mw_self_offset + mwindx);
+ idt_ntb_writefld_var(&lut_indxbar, IDT_NT_LUT_BAR, BAR2);
+
+ /* Collect the Lookup table entry partition and valid bits */
+ idt_ntb_writefld_var(&lut_partval, IDT_NT_LUT_VALID, OFF);
+
+ /* Start critical section writing to the Lookup table */
+ spin_lock_irqsave(&pdata->lut_lock, irqflags);
+ /* Write the data to the Lookup table registers of the peer */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_LUTOFFSET, lut_indxbar);
+ idt_ntb_writereg(cfg, IDT_NT_PCI_LUTLDATA, (u32)0);
+ idt_ntb_writereg(cfg, IDT_NT_PCI_LUTMDATA, (u32)0);
+ idt_ntb_writereg(cfg, IDT_NT_PCI_LUTUDATA, lut_partval);
+ /* Finally unlock the Lookup table */
+ spin_unlock_irqrestore(&pdata->lut_lock, irqflags);
+
+ return SUCCESS;
+}
+
+/*
+ * Cleanup the local Lookup table
+ */
+static int idt_ntb_cleanlut(struct idt_ntb_data *pdata)
+{
+ struct idt_ntb_dev *ndev;
+ unsigned char id, mw;
+ int ret;
+
+ /* Walk through all the available peers */
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ ndev = &pdata->ndevs[id];
+
+ /* Unset all the local memory windows */
+ for (mw = 0; mw < ndev->mw_self_cnt; mw++) {
+ ret = idt_ntb_unsetmw(ndev, mw);
+ if (SUCCESS != ret) {
+ return ret;
+ }
+ }
+ }
+
+ return SUCCESS;
+}
+
+/*
+ * Initialize the Memory Windows for the current NT-function with respect to the
+ * topologically predefined NTB pairs
+ *
+ * NOTE The first NTB pairs are lucky to have the extended set of Memory Windows
+ */
+static int idt_ntb_init_mws(struct idt_ntb_data *pdata)
+{
+ struct idt_ntb_topo *topo = &pdata->topo;
+ struct idt_ntb_dev *ndevs = pdata->ndevs;
+ unsigned char id, mwcnt, luckies, curoffset;
+ int ret;
+
+ /* Calculate the number of Memory Windows per NTB */
+ mwcnt = IDT_NTB_MW_CNT / topo->paircnt;
+ luckies = IDT_NTB_MW_CNT % topo->paircnt;
+
+ /* Find the memory windows local and peer parameters */
+ if (NTB_TOPO_PRI == pdata->role) {
+ /* Loop over all the locally available peers */
+ curoffset = 0;
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ /* Find the memory windows offset and count */
+ ndevs[id].mw_self_offset = curoffset;
+ ndevs[id].mw_self_cnt = mwcnt + (luckies > id ? 1 : 0);
+ ndevs[id].mw_peer_cnt = IDT_NTB_MW_CNT;
+
+ /* Get the offset for the next Memory Windows */
+ curoffset += ndevs[id].mw_self_cnt;
+ }
+ } else /* if (NTB_TOPO_SEC == pdata->role) */ {
+ id = ndevs[0].pairid;
+ ndevs[0].mw_self_offset = 0;
+ ndevs[0].mw_self_cnt = IDT_NTB_MW_CNT;
+ ndevs[0].mw_peer_cnt = mwcnt + (luckies > id ? 1 : 0);
+ }
+
+ /* Initialize the BAR2(3) related registers and data fields */
+ ret = idt_ntb_setup_bar2(pdata);
+ if (SUCCESS != ret) {
+ return ret;
+ }
+
+ /* Initialize the Lookup table spinlock*/
+ spin_lock_init(&pdata->lut_lock);
+
+ /* Cleanup the Lookup table */
+ (void)idt_ntb_cleanlut(pdata);
+
+ dev_dbg_data(pdata, "IDT NTB device memory windows redistributed");
+
+ return SUCCESS;
+}
+
+/*
+ * Clean the Memory Windows initialized for the current NT-function
+ */
+static void idt_ntb_clean_mws(struct idt_ntb_data *pdata)
+{
+ /* Cleanup the peers Lookup tables */
+ (void)idt_ntb_cleanlut(pdata);
+
+ /* Clean the BAR2(3) */
+ idt_ntb_clean_bar2(pdata);
+
+ dev_dbg_data(pdata, "IDT NTB function memory windows cleaned");
+}
+
+/*
+ * NTB bus callback - local memory windows count
+ */
+static int idt_ntb_mw_count(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ /* Return the number of available local memory windows */
+ return ndev->mw_self_cnt;
+}
+
+/*
+ * NTB bus callback - get the map resource of a memory window
+ */
+static int idt_ntb_mw_get_maprsc(struct ntb_dev *ntb, int idx, phys_addr_t *base,
+ resource_size_t *size)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+
+ /* It's error to pass the out of range Memory Window index */
+ if (idx >= ndev->mw_self_cnt) {
+ dev_err_ndev(ndev,
+ "Invalid memory window index passed to get map res");
+ return -EINVAL;
+ }
+
+ /* The base address is determined with respect to the Lookup table
+ * table offset */
+ if (base)
+ *base = pdata->mw_base +
+ (ndev->mw_self_offset + idx) * pdata->mw_size;
+ if (size)
+ *size = pdata->mw_size;
+
+ return SUCCESS;
+}
+
+/*
+ * NTB bus callback - get the local memory windows alignments
+ */
+static int idt_ntb_mw_get_align(struct ntb_dev *ntb, int idx,
+ resource_size_t *addr_align,
+ resource_size_t *size_align,
+ resource_size_t *size_max)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+
+ /* It's error to pass the out of range Memory Window index */
+ if (idx >= ndev->mw_self_cnt) {
+ dev_err_ndev(ndev,
+ "Invalid memory window index passed to get alignment");
+ return -EINVAL;
+ }
+
+ /* According to standard the address should be alignment within 4KB */
+ if (addr_align)
+ *addr_align = SZ_4K;
+ /* Size alignment and max size effectively make the size fixed to
+ * size_max */
+ if (size_align)
+ *size_align = pdata->mw_size;
+ if (size_max)
+ *size_max = pdata->mw_size;
+
+ return SUCCESS;
+}
+
+/*
+ * NTB bus callback - set the translation of a Memory Window
+ */
+static int idt_ntb_mw_set_trans(struct ntb_dev *ntb, int idx, dma_addr_t addr,
+ resource_size_t size)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ int ret;
+
+ /* Although the passed size is not used anywhere, we need to make sure
+ * the size fits the memory window */
+ if (0 != size && size != pdata->mw_size) {
+ dev_err_ndev(ndev,
+ "Invalid translated address size was specified");
+ return -EINVAL;
+ }
+
+ /* Set the passed memory window or unset it if the size is zero */
+ if (0 != size) {
+ ret = idt_ntb_setmw(ndev, idx, addr);
+ } else /* if (0 == size) */ {
+ ret = idt_ntb_unsetmw(ndev, idx);
+ }
+
+ return ret;
+}
+
+/*
+ * NTB bus callback - peer memory windows count
+ */
+static int idt_ntb_peer_mw_count(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ /* Return the number of available peer memory windows */
+ return ndev->mw_peer_cnt;
+}
+
+/*
+ * NTB bus callback - get the peer memory windows alignments
+ */
+static int idt_ntb_peer_mw_get_align(struct ntb_dev *ntb, int idx,
+ resource_size_t *addr_align,
+ resource_size_t *size_align,
+ resource_size_t *size_max)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+
+ /* It's error to pass the out of range Memory Window index */
+ if (idx >= ndev->mw_peer_cnt) {
+ dev_err_ndev(ndev,
+ "Invalid memory window index passed to get "
+ "peer alignment");
+ return -EINVAL;
+ }
+
+ /* Although there are only two unmodifiable LS-bits in lookup table
+ * entries, according to standard the address should be aligned
+ * within 4KB */
+ if (addr_align)
+ *addr_align = SZ_4K;
+ /* Size alignment and max size effectively make the size fixed to
+ * size_max */
+ if (size_align)
+ *size_align = pdata->mw_size;
+ if (size_max)
+ *size_max = pdata->mw_size;
+
+ return SUCCESS;
+}
+
+/*===========================================================================
+ * 5. Doorbells subsystem
+ *===========================================================================*/
+
+static void idt_ntb_db_tasklet(unsigned long data);
+
+/*
+ * Initialize the Global Doorbell Mask
+ *
+ * NOTE Initialize the Inbound Doorbell mask so the local event can
+ * be rised by the self Doorbells bits only. The Outbound
+ * Doorbell is setup so the local port could set both self
+ * and peer Doorbells. Due to the self and peer masks swap
+ * the following loops should work well on the both sides
+ */
+static void idt_ntb_init_gdbellmsk(struct idt_ntb_data *pdata, unsigned char id)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ struct idt_ntb_dev *ndevs = pdata->ndevs;
+ u32 selfpartbits, peerpartbits;
+ int setbit;
+
+ /* There is a bug if the passed id exceeds the total number of peers */
+ BUG_ON(id >= pdata->peer_cnt);
+
+ /* Get the self and peer partition masks */
+ selfpartbits = ~((u32)1 << pdata->part);
+ peerpartbits = ~((u32)1 << ndevs[id].part);
+
+ /* Init the self Doorbell masks */
+ for_each_set_bit_u32(ndevs[id].db_self_mask, setbit) {
+ idt_ntb_writereg(cfg, IDT_SW_PCI_GIDBELLMSK0 + setbit,
+ selfpartbits);
+ idt_ntb_writereg(cfg, IDT_SW_PCI_GODBELLMSK0 + setbit,
+ selfpartbits & peerpartbits);
+ }
+
+ /* Init the peer Doorbell masks */
+ for_each_set_bit_u32(ndevs[id].db_peer_mask, setbit) {
+ idt_ntb_writereg(cfg, IDT_SW_PCI_GIDBELLMSK0 + setbit,
+ peerpartbits);
+ idt_ntb_writereg(cfg, IDT_SW_PCI_GODBELLMSK0 + setbit,
+ selfpartbits & peerpartbits);
+ }
+}
+
+/*
+ * Deinitialize the Global Doorbell Mask
+ *
+ * Function is unused to make sure the NTB devices can be unloaded without
+ * any serious consequences for the peer device.
+ */
+static void __maybe_unused idt_ntb_clean_gdbellmsk(struct idt_ntb_data *pdata,
+ unsigned char id)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ struct idt_ntb_dev *ndevs = pdata->ndevs;
+ int setbit;
+
+ /* There is a bug if the passed id exceeds the total number of peers */
+ BUG_ON(id >= pdata->peer_cnt);
+
+ /* Deinit the self Doorbell masks */
+ for_each_set_bit_u32(ndevs[id].db_self_mask, setbit) {
+ idt_ntb_writereg(cfg, IDT_SW_PCI_GIDBELLMSK0 + setbit,
+ (u32)0);
+ idt_ntb_writereg(cfg, IDT_SW_PCI_GODBELLMSK0 + setbit,
+ (u32)0);
+ }
+ /* Deinit the peer Doorbell masks */
+ for_each_set_bit_u32(ndevs[id].db_peer_mask, setbit) {
+ idt_ntb_writereg(cfg, IDT_SW_PCI_GIDBELLMSK0 + setbit,
+ (u32)0);
+ idt_ntb_writereg(cfg, IDT_SW_PCI_GODBELLMSK0 + setbit,
+ (u32)0);
+ }
+}
+
+/*
+ * Initialize the Doorbells for the current NT-function with respect to the
+ * topologically predefined NTB pairs
+ *
+ * NOTE The first NTB pairs are lucky to have the extended set of Doorbells
+ */
+static void idt_ntb_init_db(struct idt_ntb_data *pdata)
+{
+ struct idt_ntb_topo *topo = &pdata->topo;
+ struct idt_ntb_dev *ndevs = pdata->ndevs;
+ unsigned char id, dbcntstd, dbcntext, dbleft, luckies, pairid, dboffset;
+ u32 pridbmask, secdbmask;
+
+ /* Calculate the number of Doorbells per pair and the leftovers */
+ dbcntstd = IDT_NTB_DBELL_CNT / topo->paircnt;
+ dbleft = IDT_NTB_DBELL_CNT % topo->paircnt + (dbcntstd % 2) * topo->paircnt;
+ /* Alter the db count to be even */
+ dbcntstd = (dbcntstd / 2) * 2;
+ dbcntext = dbcntstd + 2;
+
+ /* Number of the lucky pairs having additional Doorbells */
+ luckies = dbleft / 2;
+
+ /* Loop over all the locally available peers */
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ /* Current pair ID */
+ pairid = ndevs[id].pairid;
+
+ /* Retrieve the doorbells count and the doorbells offset for the
+ * current pair ID (the first luckies have extended doorbells) */
+ if (luckies > pairid) {
+ ndevs[id].db_cnt = dbcntext / 2;
+ dboffset = dbcntext * pairid;
+ } else {
+ ndevs[id].db_cnt = dbcntstd / 2;
+ dboffset = dbcntext * luckies +
+ dbcntstd * (pairid - luckies);
+ }
+
+ /* Calculate the valid Doorbells mask for the corresponding
+ * ports */
+ ndevs[id].db_valid_mask = ((u32)1 << ndevs[id].db_cnt) - 1;
+ pridbmask = ndevs[id].db_valid_mask << dboffset;
+ secdbmask = pridbmask << ndevs[id].db_cnt;
+
+ /* Initialize the corresponding Device structure fields */
+ if (NTB_TOPO_PRI == pdata->role) {
+ ndevs[id].db_self_mask = pridbmask;
+ ndevs[id].db_self_offset = dboffset;
+ ndevs[id].db_peer_mask = secdbmask;
+ ndevs[id].db_peer_offset = dboffset + ndevs[id].db_cnt;
+ } else /* if (NTB_TOPO_SEC == pdata->role) */ {
+ ndevs[id].db_self_mask = secdbmask;
+ ndevs[id].db_self_offset = dboffset + ndevs[id].db_cnt;
+ ndevs[id].db_peer_mask = pridbmask;
+ ndevs[id].db_peer_offset = dboffset;
+ }
+
+ /* Initialize the corresponding Global Doorbell masks. It can be
+ * done by both Primary and Secondary ports */
+ idt_ntb_init_gdbellmsk(pdata, id);
+ }
+
+ /* Initialize the spin lock to sync access to the self doorbell status
+ * and mask variables */
+ pdata->db_sts = 0;
+ pdata->db_msk = (u32)-1;
+ /* In fact db_lock is used at most at tasklet so BH lock would be enough,
+ * but the critical section can be accessed in the db event handler,
+ * which is protected by the context irqsave spin lock. So calling BH
+ * spin locker/unlocker function would cause the OOPS Warning of
+ * local_bh_enable_ip method. Therefore the irqsave/irqrestore methods
+ * are used to synchronize access to the db_sts and db_msk fields*/
+ spin_lock_init(&pdata->db_lock);
+
+ /* Initialize the doorbells tasklet */
+ tasklet_init(&pdata->db_tasklet, idt_ntb_db_tasklet,
+ (unsigned long)pdata);
+
+ /* Unmask the inbound doorbell interrupts */
+ idt_ntb_writereg(pdata->cfg_mmio, IDT_NT_PCI_INDBELLMSK, INDB_UNMASK);
+
+ dev_dbg_data(pdata, "IDT NTB device doorbells initialized");
+}
+
+/*
+ * Clean the Doorbells initialized for the pairs of NT-functions
+ *
+ * It just makes all the NT-functions being able to use the self and peer
+ * Doorbells
+ */
+static void idt_ntb_clean_db(struct idt_ntb_data *pdata)
+{
+ /*unsigned char id;*/
+
+ /* Just kill the tasklet */
+ tasklet_kill(&pdata->db_tasklet);
+
+ /* Just clean the Doorbell masks for all the peers as they must have
+ * initially been. Do it by the Primary side only */
+ /*if (NTB_TOPO_PRI == pdata->role) {
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ idt_ntb_clean_gdbellmsk(pdata, id);
+ }
+ }*/
+
+ dev_dbg_data(pdata, "IDT NTB device doorbells deinitilized");
+}
+
+/*
+ * Doorbells event tasklet
+ */
+static void idt_ntb_db_tasklet(unsigned long data)
+{
+ struct idt_ntb_data *pdata = (struct idt_ntb_data *)data;
+ struct idt_ntb_dev *ndevs = pdata->ndevs;
+ void __iomem *cfg = pdata->cfg_mmio;
+ u32 db_sts, db_self, db_sts_prev;
+ unsigned long setbit, irqflags;
+ unsigned char id;
+
+ /* NOTE All doorbells are masked to generate the interrupt by the IRQ
+ * handler until the cause of the interrupt is handled */
+ db_sts = idt_ntb_readreg(cfg, IDT_NT_PCI_INDBELLSTS);
+ /* Clear all the retrieved doorbell bits */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_INDBELLSTS, db_sts);
+ /* Finally unmask the doorbells interrupt. The next action shall rise
+ * the interrupt if any doorbell bit was set after the register had
+ * been read and cleared */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_INDBELLMSK, INDB_UNMASK);
+
+ /** START Sync access to the doorbell variables */
+ spin_lock_irqsave(&pdata->db_lock, irqflags);
+ /* Retrieve the current doorbell status bits */
+ db_sts_prev = pdata->db_sts;
+ /* Set the new doorbell status */
+ pdata->db_sts |= db_sts;
+ /* There are going to be handled only the doorbell bits, which have not
+ * been set before and also have not been masked */
+ db_sts &= ~db_sts_prev & ~pdata->db_msk;
+ /** END The critical section of access to the doorbell variables */
+ spin_unlock_irqrestore(&pdata->db_lock, irqflags);
+
+ /* If the new doorbell status bits are masked then do nothing */
+ if (!db_sts) {
+ dev_dbg_data(pdata, "Got masked doorbell interrupt");
+ return;
+ }
+
+ /* Walk through all the peers looking for the relevant one to handle
+ * new doorbells */
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ /* Invoke the context callback if there are doorbells set for
+ * the current NTB device */
+ db_self = (db_sts & ndevs[id].db_self_mask);
+ db_self >>= ndevs[id].db_self_offset;
+ for_each_set_bit_u32(db_self, setbit) {
+ ntb_db_event(&ndevs[id].ntb, (int)setbit);
+ }
+ }
+}
+
+/*
+ * NTB bus callback - get a mask of doorbell bits supported by the ntb
+ */
+static u64 idt_ntb_db_valid_mask(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ /* Return the valid doorbell bits mask */
+ return ndev->db_valid_mask;
+}
+
+/*
+ * NTB bus callback - get the number of doorbell interrupt vectors
+ */
+static int idt_ntb_db_vector_count(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ /* Number of doorbell vectors equal to the doorbell bits count */
+ return ndev->db_cnt;
+}
+
+/*
+ * NTB bus callback - get a mask of doorbell bits serviced by a vector
+ */
+static u64 idt_ntb_db_vector_mask(struct ntb_dev *ntb, int db_vec)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ if (db_vec < 0 || ndev->db_cnt <= db_vec) {
+ return 0;
+ }
+
+ /* Each doorbell bit corresponds to the vector so the mask is just one
+ * shifted bit */
+ return ((u64)1 << db_vec);
+}
+
+/*
+ * NTB bus callback - read the local doorbell register
+ */
+static u64 idt_ntb_db_read(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ unsigned long irqflags;
+ u32 db_sts;
+
+ /** START Sync access to the doorbell variables */
+ spin_lock_irqsave(&pdata->db_lock, irqflags);
+ /* Read the current doorbell status */
+ db_sts = pdata->db_sts;
+ /** END The critical section of access to the doorbell variables */
+ spin_unlock_irqrestore(&pdata->db_lock, irqflags);
+
+ /* Return the accordingly shifted doorbell bits */
+ return (db_sts & ndev->db_self_mask) >> ndev->db_self_offset;
+}
+
+/*
+ * NTB bus callback - set bits in the local doorbell register
+ *
+ * NOTE It must be done using the doorbell register io to generate the
+ * interrupt and invoke the doorbell event handler set by the client
+ * driver
+ */
+static int idt_ntb_db_set(struct ntb_dev *ntb, u64 db_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ void __iomem *cfg = to_cfg_ndev(ndev);
+
+ /* Return error if invalid bits are set */
+ if (db_bits & ~ndev->db_valid_mask) {
+ dev_dbg_ndev(ndev,
+ "Invalid doorbell bits are passed to locally set");
+ return -EINVAL;
+ }
+
+ /* Set the corresponding bits in the doorbell register */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_OUTDBELLSET,
+ ((u32)db_bits << ndev->db_self_offset));
+
+ return SUCCESS;
+}
+
+/*
+ * NTB bus callback - clear bits in the local doorbell register
+ */
+static int idt_ntb_db_clear(struct ntb_dev *ntb, u64 db_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ unsigned long irqflags;
+
+ /* Return error if invalid bits are set */
+ if (db_bits & ~ndev->db_valid_mask) {
+ dev_dbg_ndev(ndev,
+ "Invalid doorbell bits are passed to locally clear");
+ return -EINVAL;
+ }
+
+ /** START Sync access to the doorbell variables */
+ spin_lock_irqsave(&pdata->db_lock, irqflags);
+ /* Read the current doorbell status */
+ pdata->db_sts &= ~((u32)db_bits << ndev->db_self_offset);
+ /** END The critical section of access to the doorbell variables */
+ spin_unlock_irqrestore(&pdata->db_lock, irqflags);
+
+ return SUCCESS;
+}
+
+/*
+ * NTB bus callback - read the local doorbell mask
+ */
+static u64 idt_ntb_db_read_mask(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ unsigned long irqflags;
+ u32 db_msk;
+
+ /** START Sync access to the doorbell variables */
+ spin_lock_irqsave(&pdata->db_lock, irqflags);
+ /* Read the current doorbell mask */
+ db_msk = pdata->db_msk;
+ /** END The critical section of access to the doorbell variables */
+ spin_unlock_irqrestore(&pdata->db_lock, irqflags);
+
+ /* Return the accordingly shifted doorbell bits */
+ return (db_msk & ndev->db_self_mask) >> ndev->db_self_offset;
+}
+
+/*
+ * NTB bus callback - set bits in the local doorbell mask
+ */
+static int idt_ntb_db_set_mask(struct ntb_dev *ntb, u64 db_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ unsigned long irqflags;
+
+ /* Return error if invalid bits are set */
+ if (db_bits & ~ndev->db_valid_mask) {
+ dev_dbg_ndev(ndev,
+ "Invalid field is passed to set the doorbell mask");
+ return -EINVAL;
+ }
+
+ /** START Sync access to the doorbell variables */
+ spin_lock_irqsave(&pdata->db_lock, irqflags);
+ /* Set the corresponding bits in the local mask */
+ pdata->db_msk |= ((u32)db_bits << ndev->db_self_offset);
+ /** END The critical section of access to the doorbell variables */
+ spin_unlock_irqrestore(&pdata->db_lock, irqflags);
+
+ return SUCCESS;
+}
+
+/*
+ * NTB bus callback - clear bits in the local doorbell mask
+ */
+static int idt_ntb_db_clear_mask(struct ntb_dev *ntb, u64 db_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ u32 db_sts, unmask_bits;
+ unsigned long setbit, irqflags;
+
+ /* Return error if invalid bits are set */
+ if (db_bits & ~ndev->db_valid_mask) {
+ dev_dbg_ndev(ndev,
+ "Invalid field is passed to clear the doorbell mask");
+ return -EINVAL;
+ }
+
+ /* Calculate the unmaskable bits first */
+ unmask_bits = ((u32)db_bits << ndev->db_self_offset);
+
+ /** START Sync access to the doorbell variables */
+ spin_lock_irqsave(&pdata->db_lock, irqflags);
+ /* Retrieve the doorbell status bits, which have been masked, but are
+ * going to be unmasked now */
+ db_sts = pdata->db_sts & pdata->db_msk & unmask_bits;
+ /* Clear the corresponding bits in the local mask */
+ pdata->db_msk &= ~unmask_bits;
+ /** END The critical section of access to the doorbell variables */
+ spin_unlock_irqrestore(&pdata->db_lock, irqflags);
+
+ /* Invoke the context callback if there are set doorbells, which have
+ * just been unmasked */
+ db_sts = (db_sts & ndev->db_self_mask) >> ndev->db_self_offset;
+ for_each_set_bit_u32(db_sts, setbit) {
+ ntb_db_event(&ndev->ntb, (int)setbit);
+ }
+
+ return SUCCESS;
+}
+
+/*
+ * NTB bus callback - set bits in the peer doorbell register
+ */
+static int idt_ntb_peer_db_set(struct ntb_dev *ntb, u64 db_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ void __iomem *cfg = to_cfg_ndev(ndev);
+
+ /* Return error if invalid bits are set */
+ if (db_bits & ~ndev->db_valid_mask) {
+ dev_dbg_ndev(ndev,
+ "Invalid doorbell bits are passed to remotely set");
+ return -EINVAL;
+ }
+
+ /* Set the corresponding bits in the doorbell register */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_OUTDBELLSET,
+ ((u32)db_bits << ndev->db_peer_offset));
+
+ return SUCCESS;
+}
+
+/*===========================================================================
+ * 6. Messaging subsystem
+ *===========================================================================*/
+
+static void idt_ntb_inmsg_work(struct work_struct *work);
+
+static void idt_ntb_outmsg_work(struct work_struct *work);
+
+static void idt_ntb_msg_tasklet(unsigned long data);
+
+/*
+ * Constructor is used initialize the allocated message structure
+ */
+static inline void idt_ntb_msg_ctor(struct idt_ntb_msg *msg)
+{
+ /* Set initial message retry count */
+ msg->retry = IDT_NTB_SENDMSG_RETRY;
+
+ /* Init the queue entry */
+ INIT_LIST_HEAD(&msg->entry);
+}
+
+/*
+ * Initialize the messaging subsystem
+ */
+static int idt_ntb_init_msg(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ struct idt_ntb_dev *ndev;
+ unsigned char id;
+
+ /* Allocate the IDT messages cache without alignment and flags with no
+ * constructor */
+ pdata->msg_cache = kmem_cache_create(NTB_CACHENAME,
+ sizeof(struct idt_ntb_msg), 0, 0, NULL);
+ if (NULL == pdata->msg_cache) {
+ dev_err_data(pdata,
+ "IDT NTB failed to allocate the messages cache");
+ return -ENOMEM;
+ }
+
+ /* Init the messages routing spin lock */
+ spin_lock_init(&pdata->msg_lock);
+
+ /* Walk through all the device initializing the message related
+ * structures */
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ /* Get the current NTB device structure */
+ ndev = &pdata->ndevs[id];
+
+ /* Initialize the incoming messages queue */
+ atomic_queue_init(&ndev->qinmsg);
+ /* Setup the incoming message work thread (it's not delayed) */
+ INIT_WORK(&ndev->inmsg_work, idt_ntb_inmsg_work);
+
+ /* Initialize the outgoing messages queue */
+ atomic_queue_init(&ndev->qoutmsg);
+ /* Setup the outgoing message work thread (it can be
+ * delayed) */
+ INIT_DELAYED_WORK(&ndev->outmsg_work, idt_ntb_outmsg_work);
+ }
+
+ /* Setup the messages tasklet - bh handler of incoming messages */
+ tasklet_init(&pdata->msg_tasklet, idt_ntb_msg_tasklet,
+ (unsigned long)pdata);
+
+ /* Clear the outbound and inbound Messages status */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_MSGSTS, MSG_MASK);
+
+ /* Unmask the message interrupts only for the first incoming message
+ * register */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_MSGSTSMSK, MSG_UNMASK);
+
+ dev_dbg_data(pdata, "IDT NTB device messaging subsystem initialized");
+
+ return SUCCESS;
+}
+
+/*
+ * Deinitialize the messaging subsystem
+ */
+static void idt_ntb_deinit_msg(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ struct idt_ntb_dev *ndev;
+ struct list_head *entry;
+ unsigned char id;
+
+ /* Just kill the tasklet */
+ tasklet_kill(&pdata->db_tasklet);
+
+ /* Walk through all the devices deinitializing the message related
+ * structures */
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ /* Get the current NTB device structure */
+ ndev = &pdata->ndevs[id];
+
+ /* Stop the incoming message work thread */
+ cancel_work_sync(&ndev->inmsg_work);
+ /* Free all the allocated incoming message objects */
+ while (!atomic_queue_empty(&ndev->qinmsg)) {
+ entry = atomic_queue_get(&ndev->qinmsg);
+ kmem_cache_free(pdata->msg_cache,
+ to_msg_list_entry(entry));
+ }
+
+ /* Stop the outgoing message work thread */
+ cancel_delayed_work_sync(&ndev->outmsg_work);
+ /* Free all the allocated outgoing message objects */
+ while (!atomic_queue_empty(&ndev->qoutmsg)) {
+ entry = atomic_queue_get(&ndev->qoutmsg);
+ kmem_cache_free(pdata->msg_cache,
+ to_msg_list_entry(entry));
+ }
+ }
+
+ /* Mask the message interrupts */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_MSGSTSMSK, MSG_MASK);
+
+ /* Clear the outbound and inbound messages status */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_MSGSTS, MSG_MASK);
+
+ /* Destroy the IDT messages cache */
+ kmem_cache_destroy(pdata->msg_cache);
+
+ dev_dbg_data(pdata,
+ "IDT NTB function messaging subsystem deinitialized");
+}
+
+/*
+ * Write message to the specified peer
+ */
+static int idt_ntb_writemsg(struct idt_ntb_dev *ndev, const struct ntb_msg *msg)
+{
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ void __iomem *cfg = to_cfg_ndev(ndev);
+ u32 stat, swpmsgctl[IDT_NTB_MSG_CNT];
+ int regid;
+
+ /* Initialize the message control register so the local outbound message
+ * registers would be connected with the peers inbound ones */
+ for (regid = 0; regid < IDT_NTB_MSG_CNT; regid++) {
+ /* Init switch partition message control registers variable */
+ swpmsgctl[regid] = 0;
+ idt_ntb_writefld_var(&swpmsgctl[regid], IDT_SW_MSGROUTE_REG,
+ regid);
+ idt_ntb_writefld_var(&swpmsgctl[regid], IDT_SW_MSGROUTE_PART,
+ ndev->part);
+ }
+
+ /* Use spin lock to synchronize just thirteen IO operations. It's used
+ * just among the kernel threads so we don't need to disable IRQs/bh */
+ spin_lock(&pdata->msg_lock);
+ /* Route to the local outbound message to the inbound one of the peer
+ * and send the data to there starting from the data because the
+ * interrupts are enabled for the first message register only */
+ for (regid = (IDT_NTB_MSG_CNT - 1); 0 <= regid; regid--) {
+ /* Set the route and send the data */
+ idt_ntb_writereg(cfg, partdata_tbl[pdata->part].msgctl[regid],
+ swpmsgctl[regid]);
+ idt_ntb_writereg(cfg, IDT_NT_PCI_OUTMSG0 + regid,
+ msg->data[regid]);
+ /* Read the status of the previous operation */
+ stat = idt_ntb_readfld_mem(cfg, IDT_NT_OUTMSGSTS);
+ if (SUCCESS != stat) {
+ dev_dbg_ndev(ndev,
+ "Failed to send message to peer %hhd", regid);
+ break;
+ }
+ }
+ /* Immedietly clear the outbound message status if it has been set */
+ if (SUCCESS != stat) {
+ idt_ntb_writereg(cfg, IDT_NT_PCI_MSGSTS, OUTMSG_MASK);
+ }
+ /* Finally unlock the message routing subsystem */
+ spin_unlock(&pdata->msg_lock);
+
+ /* If the write operation was not successful then the peer inbound
+ * register must be full so return -EBUSY error */
+ if (SUCCESS != stat) {
+ return -EBUSY;
+ }
+
+ return SUCCESS;
+}
+
+/*
+ * Read the message
+ */
+static int idt_ntb_readmsg(struct idt_ntb_data *pdata, unsigned char *part,
+ struct ntb_msg *msg)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ u32 msgsts, msgsrc;
+ unsigned char regid;
+
+ /* Read the inbound messages status */
+ msgsts = idt_ntb_readfld_mem(cfg, IDT_NT_INMSGSTS);
+ if (INMSG_STS != msgsts) {
+ dev_err_data(pdata, "Invalid status %#80x to read msg", msgsts);
+ BUG();
+ return -EINVAL;
+ }
+
+ /* Read data from the inbound message registers. It doesn't need to be
+ * synchronized since the read operation is performed from the tasklet
+ * only, that is non-reentrant */
+ *part = idt_ntb_readreg(cfg, IDT_NT_PCI_INMSGSRC0);
+ for (regid = 0; regid < IDT_NTB_MSG_CNT; regid++) {
+ msg->data[regid] =
+ idt_ntb_readreg(cfg, IDT_NT_PCI_INMSG0 + regid);
+ /* Read the source of the message checking whether the message
+ * data has come from the same partition */
+ msgsrc = idt_ntb_readreg(cfg, IDT_NT_PCI_INMSGSRC0 + regid);
+ if (msgsrc != *part) {
+ dev_err_data(pdata,
+ "Message data is inconsistent, src: %u != %u",
+ *part, msgsrc);
+ BUG();
+ return -EINVAL;
+ }
+ }
+
+ /* Clear the inbound message status */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_MSGSTS, INMSG_MASK);
+
+ return SUCCESS;
+}
+
+/*
+ * Work thread handling the inbound messages events
+ */
+static void idt_ntb_inmsg_work(struct work_struct *work)
+{
+ struct idt_ntb_dev *ndev = to_ndev_inmsg_work(work);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ struct list_head *entry;
+ struct idt_ntb_msg *msgwrap;
+
+ /* Retrieve the last received message. It's bug to have inbound message
+ * queue empty at this point since the tasklet has just added one in
+ * there */
+ entry = atomic_queue_get(&ndev->qinmsg);
+ BUG_ON(NULL == entry);
+ msgwrap = to_msg_list_entry(entry);
+
+ /* Call the client driver message event handler */
+ ntb_msg_event(&ndev->ntb, NTB_MSG_NEW, &msgwrap->msg);
+
+ /* Message memory can be freed */
+ kmem_cache_free(pdata->msg_cache, msgwrap);
+}
+
+/*
+ * Work thread handling the outgoing messages
+ */
+static void idt_ntb_outmsg_work(struct work_struct *work)
+{
+ struct idt_ntb_dev *ndev = to_ndev_outmsg_work(work);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ struct list_head *entry;
+ struct idt_ntb_msg *msgwrap;
+ int ret;
+
+ /* Retrieve a message from the top of the queue. It's bug to have
+ * inbound message queue empty at this point since the client driver
+ * has just added one in there */
+ entry = atomic_queue_get(&ndev->qoutmsg);
+ BUG_ON(NULL == entry);
+ msgwrap = to_msg_list_entry(entry);
+
+ /* If link is not up it is useless to send any data */
+ if (OFF == idt_ntb_link_status(ndev)) {
+ dev_dbg_ndev(ndev,
+ "Link got suddenly down while sending a message");
+ /* Link got down so rise the fail event */
+ ntb_msg_event(&ndev->ntb, NTB_MSG_FAIL, &msgwrap->msg);
+ /* Message memory can be freed */
+ kmem_cache_free(pdata->msg_cache, msgwrap);
+ /* If some messages are left then reschedule the worker */
+ goto outmsg_work_requeue;
+ } /* else of (ON == idt_ntb_link_status(ndev)) */
+
+ /* Try to send the message */
+ ret = idt_ntb_writemsg(ndev, &msgwrap->msg);
+ if (SUCCESS == ret) {
+ /* The message has been successfully sent so rise the event */
+ ntb_msg_event(&ndev->ntb, NTB_MSG_SENT, &msgwrap->msg);
+ /* Message memory can be freed */
+ kmem_cache_free(pdata->msg_cache, msgwrap);
+ /* May need to reschedule the worker */
+ goto outmsg_work_requeue;
+ } /* else if (SUCCESS != ret) {} */
+
+ /* Could not send message. Rise the error if it has been the last
+ * attempt. If it hasn't get the message back into the queue and
+ * restart the worker */
+ msgwrap->retry--;
+ if (likely(0 != msgwrap->retry)) {
+ atomic_queue_add(&ndev->qoutmsg, &msgwrap->entry);
+ } else /* if (0 == msgwrap->retry) */ {
+ dev_err_ndev(ndev, "Run out of attempt to send a message");
+ /* Rise the error in this case */
+ ntb_msg_event(&ndev->ntb, NTB_MSG_FAIL, &msgwrap->msg);
+ /* Message memory can be freed */
+ kmem_cache_free(pdata->msg_cache, msgwrap);
+ }
+
+ /* If there is something left to send then queue the handler again */
+outmsg_work_requeue:
+ if (!atomic_queue_empty(&ndev->qoutmsg)) {
+ (void)queue_delayed_work(pdata->idt_wq, &ndev->outmsg_work,
+ IDT_NTB_SENDMSG_TOUT);
+ }
+}
+
+/*
+ * Tasklet handling inbound messages
+ */
+static void idt_ntb_msg_tasklet(unsigned long data)
+{
+ struct idt_ntb_data *pdata = (struct idt_ntb_data *)data;
+ struct idt_ntb_dev *ndev, *tndev = NULL;
+ struct idt_ntb_msg *msgwrap;
+ void __iomem *cfg = pdata->cfg_mmio;
+ unsigned char part, id;
+
+ /* Allocate the memory for the new message */
+ msgwrap = kmem_cache_alloc(pdata->msg_cache, GFP_KERNEL);
+ if (NULL == msgwrap) {
+ dev_err_data(pdata,
+ "Failed to allocate memory for incoming message");
+ return;
+ }
+ /* Initializet the allocated message wrap structure although it's not
+ * necessary here */
+ idt_ntb_msg_ctor(msgwrap);
+
+ /* Read the message from the inbound registers. Don't need to check
+ * the return value since error would be asserted anyway */
+ (void)idt_ntb_readmsg(pdata, &part, &msgwrap->msg);
+
+ /* Finally unmask the message IRQs so the next message can be
+ * retrieved */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_MSGSTSMSK, MSG_UNMASK);
+
+ /* Find device the message has been sent to */
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ /* Retrieve the current NTB device */
+ ndev = &pdata->ndevs[id];
+
+ /* Break the loop if target device is found */
+ if (ndev->part == part) {
+ tndev = ndev;
+ break;
+ }
+ }
+ /* Assert bug if message was received from invalid partition */
+ BUG_ON(NULL == tndev);
+
+ /* Add the new message to the tail of incoming queue of the target
+ * device */
+ atomic_queue_add_tail(&ndev->qinmsg, &msgwrap->entry);
+
+ /* Schedule the inbound message worker straight away */
+ (void)queue_work(pdata->idt_wq, &ndev->inmsg_work);
+}
+
+/*
+ * NTB bus callback - post the message to the peer
+ */
+static int idt_ntb_msg_post(struct ntb_dev *ntb, struct ntb_msg *msg)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_data *pdata = to_data_ndev(ndev);
+ struct idt_ntb_msg *msgwrap;
+ unsigned char idx;
+
+ /* If the link is down then don't post any message */
+ if (OFF == idt_ntb_link_status(ndev)) {
+ dev_dbg_ndev(ndev,
+ "Can't post a message since link is down");
+ return -EINVAL;
+ }
+
+ /* Allocate memory for message wrap structure */
+ msgwrap = kmem_cache_alloc(pdata->msg_cache, GFP_KERNEL);
+ if (NULL == msgwrap) {
+ dev_err_data(pdata,
+ "Failed to allocate memory for outgoing message");
+ return -ENOMEM;
+ }
+ /* Initializet the allocated message wrap structure */
+ idt_ntb_msg_ctor(msgwrap);
+
+ /* Fill in the message wrapper with data */
+ for (idx = 0; idx < IDT_NTB_MSG_CNT; idx++) {
+ msgwrap->msg.data[idx] = msg->data[idx];
+ }
+
+ /* Add the initialized wrap to the queue of outgoing messages */
+ atomic_queue_add_tail(&ndev->qoutmsg, &msgwrap->entry);
+
+ /* Start the outgoing messages worker with no timeout */
+ (void)queue_delayed_work(pdata->idt_wq, &ndev->outmsg_work, 0);
+
+ return SUCCESS;
+}
+
+/*
+ * NTB bus callback - size of the message data
+ */
+static int idt_ntb_msg_size(struct ntb_dev *ntb)
+{
+ /* Just return the number of messages registers */
+ return IDT_NTB_MSG_CNT;
+}
+
+/*===========================================================================
+ * 7. IRQ-related functions
+ *===========================================================================*/
+
+static irqreturn_t idt_ntb_isr(int irq, void *dev);
+
+/*
+ * Convert the temperature field to the value and fraction
+ */
+static inline void idt_ntb_convert_temp(const u32 temp,
+ unsigned char *val, unsigned char *frac)
+{
+ *val = temp >> 1;
+ *frac = ((temp & 0x1) ? 5 : 0);
+}
+
+/*
+ * Initialize the IDT IRQ sources
+ */
+static void idt_ntb_init_irqsrc(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ u32 tempctl = 0;
+
+ /* Set the temperature sensor alarms */
+ idt_ntb_writefld_var(&tempctl, IDT_SW_TMP_LTH, IDT_NTB_TEMP_LTH << 1);
+ idt_ntb_writefld_var(&tempctl, IDT_SW_TMP_HTH, IDT_NTB_TEMP_HTH << 1);
+ idt_ntb_writefld_var(&tempctl, IDT_SW_TMP_BLTH_EN, ON);
+ idt_ntb_writefld_var(&tempctl, IDT_SW_TMP_AHTH_EN, ON);
+ idt_ntb_writefld_var(&tempctl, IDT_SW_TMP_PDOWN, OFF);
+ idt_ntb_writereg(cfg, IDT_SW_PCI_TMPCTL, tempctl);
+
+ /* Interrupts are enabled by default only for Primary side since there
+ * can be more than one device */
+ if (NTB_TOPO_PRI == pdata->role) {
+ /* Enable the interrupts of message, doorbells, switch and
+ * temperature sensor events. This will generate all the
+ * pending interrupts after the link is effectively enabled */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_NTINTMSK, NTINT_UNMASK);
+ } else /* if (NTB_TOPO_SEC == pdata->role) */ {
+ /* Disable all the interrupts. NTB device enable callback will
+ * enable the necessary message, doorbells, switch and
+ * temperature sensor events */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_NTINTMSK, ALLINT_MASK);
+ }
+}
+
+/*
+ * Clear the IDT IRQs
+ */
+static void idt_ntb_clear_irqsrc(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ u32 tempctl = 0;
+
+ /* Unset the temperature sensor alarm and disable the sensor */
+ idt_ntb_writefld_var(&tempctl, IDT_SW_TMP_BLTH_EN, OFF);
+ idt_ntb_writefld_var(&tempctl, IDT_SW_TMP_AHTH_EN, OFF);
+ idt_ntb_writefld_var(&tempctl, IDT_SW_TMP_PDOWN, ON);
+ idt_ntb_writereg(cfg, IDT_SW_PCI_TMPCTL, tempctl);
+
+ /* Mask all the interrupts */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_NTINTMSK, ALLINT_MASK);
+}
+
+/*
+ * Initialize the PCIe interrupt handler
+ *
+ * NOTE The code is gotoed a bit, but still it's pretty obvious. First
+ * we try to enable MSI interrupt. If it fails we initiate the INTx interrupt.
+ * In any successful case the IDT NTB interrupts need to be enabled.
+ */
+static int idt_ntb_init_isr(struct idt_ntb_data *pdata)
+{
+ struct pci_dev *pdev = pdata->pdev;
+ int ret;
+
+ /* Enable the MSI interrupts */
+ ret = pci_enable_msi(pdev);
+ if (SUCCESS != ret) {
+ dev_err_data(pdata, "IDT failed to enable MSI interrupt");
+ goto err_try_intx;
+ }
+
+ /* Request correspondig IRQ number */
+ ret = request_irq(pdev->irq, idt_ntb_isr, 0, NTB_IRQNAME, pdata);
+ if (SUCCESS != ret) {
+ dev_err_data(pdata, "IDT failed to set MSI IRQ handler");
+ goto err_disable_msi;
+ }
+
+ /* From now on the MSI interrupt is used */
+ dev_dbg_data(pdata, "IDT NTB is using MSI interrupts");
+
+ /* Need to enable the corresponding IDT NTB interrupts */
+ goto idt_init_irqs;
+
+err_disable_msi:
+ pci_disable_msi(pdev);
+
+err_try_intx:
+ /* Enable INTx interrutps since MSI can't be used */
+ pci_intx(pdev, ON);
+
+ ret = request_irq(pdev->irq, idt_ntb_isr, IRQF_SHARED,
+ NTB_IRQNAME, pdata);
+ if (SUCCESS != ret) {
+ dev_err_data(pdata, "IDT failed to enable INTx interrupt");
+ goto err_pci_indx;
+ }
+
+ /* From now on the INTx interrupt is used */
+ dev_dbg_data(pdata, "IDT NTB is using INTx interrupts");
+
+ /* Need to enable the corresponding IDT NTB interrupts */
+idt_init_irqs:
+ idt_ntb_init_irqsrc(pdata);
+
+ dev_dbg_data(pdata, "IDT NTB function IRQs initilized");
+
+ return SUCCESS;
+
+err_pci_indx:
+ pci_intx(pdev, OFF);
+
+ return ret;
+}
+
+/*
+ * Deinitialize the PCIe interrupt handler
+ */
+static void idt_ntb_clear_isr(struct idt_ntb_data *pdata)
+{
+ struct pci_dev *pdev = pdata->pdev;
+
+ /* Clear the IDT NTB interrupt sources by masking them */
+ idt_ntb_clear_irqsrc(pdata);
+
+ /* Stop the interrupt handling */
+ free_irq(pdev->irq, pdata);
+ if (pci_dev_msi_enabled(pdev)) {
+ pci_disable_msi(pdev);
+ } else /* if (!pci_dev_msi_enabled(pdev)) */ {
+ pci_intx(pdev, OFF);
+ }
+
+ dev_dbg_data(pdata, "IDT NTB function interrupts are disabled");
+}
+
+/*
+ * Switch events ISR
+ */
+static void idt_ntb_se_isr(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ u32 ntintsts = 0, sests;
+
+ /* Clean the corresponding interrupt bit */
+ idt_ntb_writefld_var(&ntintsts, IDT_NT_SEINT_STS, ON);
+ idt_ntb_writereg(cfg, IDT_NT_PCI_NTINTSTS, ntintsts);
+
+ /* Just print we got the switch event */
+ sests = idt_ntb_readreg(cfg, IDT_SW_PCI_SESTS);
+ dev_dbg_data(pdata, "Got switch event IRQ %#08x", sests);
+}
+
+/*
+ * Temperature sensor event ISR
+ */
+static void idt_ntb_temp_isr(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ u32 ntintsts = 0, curtemp;
+ unsigned char val, frac;
+
+ /* Clean the corresponding interrupt bit */
+ idt_ntb_writefld_var(&ntintsts, IDT_NT_TMPINT_STS, ON);
+ idt_ntb_writereg(cfg, IDT_NT_PCI_NTINTSTS, ntintsts);
+
+ /* Read the temperature status */
+ curtemp = idt_ntb_readfld_mem(cfg, IDT_SW_TMP_CURTEMP);
+ idt_ntb_convert_temp(curtemp, &val, &frac);
+
+ /* Print the current temperature */
+ dev_warn_data(pdata,
+ "IDT temperature sensor alarm: %hhu.%hhu, valid space [%d;%d]",
+ val, frac, IDT_NTB_TEMP_LTH, IDT_NTB_TEMP_HTH);
+
+ /* Read the temperature alarm to clear the value out */
+ (void)idt_ntb_readreg(cfg, IDT_SW_PCI_TMPALARM);
+}
+
+/*
+ * IDT PCIe-swtich NTB-function interrupts handler
+ */
+static irqreturn_t idt_ntb_isr(int irq, void *dev)
+{
+ struct idt_ntb_data *pdata = dev;
+ void __iomem *cfg = pdata->cfg_mmio;
+ u32 ntintsts;
+ unsigned long setbit;
+ irqreturn_t status = IRQ_NONE;
+
+ /* Read the NTINTSTS register to determine the source of the
+ * interrupt.
+ * NOTE In order to make sure the deferred handlers are executed
+ * only when the corresponding interrupt really happens, the
+ * message/boorbell interrupt is temporarily masked. Additionally
+ * the interrupts status register must be filtered with the interrupts
+ * mask since the correposnding bit may be set even when the interrupt
+ * is masked */
+ ntintsts = idt_ntb_readreg(cfg, IDT_NT_PCI_NTINTSTS) &
+ ~idt_ntb_readreg(cfg, IDT_NT_PCI_NTINTMSK);
+ for_each_set_bit_u32(ntintsts, setbit) {
+ /* Handle the cause of the interrupt */
+ switch (setbit) {
+ case MSGINT_BIT:
+ /* Mask the message IRQs until the data is handled. It
+ * must be unmasked within the tasklet right after the
+ * data is read so the next message can be retrieved */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_MSGSTSMSK, MSG_MASK);
+ /* Schedule the tasklet to handle the new message */
+ tasklet_schedule(&pdata->msg_tasklet);
+ break;
+ case DBINT_BIT:
+ /* Mask the doorbell IRQs until the data is handled. It
+ * must be unmasked within the tasklet right after the
+ * doorbell status bits are read and clear so the next
+ * doorbell event can be raised */
+ idt_ntb_writereg(cfg, IDT_NT_PCI_INDBELLMSK, INDB_MASK);
+ /* Schedule the tasklet to handle the set doorbell bits */
+ tasklet_schedule(&pdata->db_tasklet);
+ break;
+ case SEINT_BIT:
+ /* Just call the switch event handler. It doesn't do
+ * much work */
+ idt_ntb_se_isr(pdata);
+ break;
+ case TEMPINT_BIT:
+ /* Just call the temperature sensor event handler.
+ * It doesn't do much work */
+ idt_ntb_temp_isr(pdata);
+ break;
+ default:
+ dev_err_data(pdata,
+ "Invalid IDT IQR status bit is set");
+ break;
+ }
+ /* If there is any interrupt bit is set then we handle it */
+ status = IRQ_HANDLED;
+ }
+
+ return status;
+}
+
+/*===========================================================================
+ * 8. NTB bus initialization
+ *===========================================================================*/
+
+/*
+ * NTB KAPI operations
+ *
+ * NOTE This driver implements the synchronous interface only.
+ */
+static const struct ntb_dev_ops idt_ntb_ops = {
+ .link_is_up = idt_ntb_link_is_up,
+ .link_enable = idt_ntb_link_enable,
+ .link_disable = idt_ntb_link_disable,
+ .mw_count = idt_ntb_mw_count,
+ .mw_get_maprsc = idt_ntb_mw_get_maprsc,
+ .mw_get_align = idt_ntb_mw_get_align,
+ .mw_set_trans = idt_ntb_mw_set_trans,
+ .peer_mw_count = idt_ntb_peer_mw_count,
+ .peer_mw_get_align = idt_ntb_peer_mw_get_align,
+ .db_valid_mask = idt_ntb_db_valid_mask,
+ .db_vector_count = idt_ntb_db_vector_count,
+ .db_vector_mask = idt_ntb_db_vector_mask,
+ .db_read = idt_ntb_db_read,
+ .db_set = idt_ntb_db_set,
+ .db_clear = idt_ntb_db_clear,
+ .db_read_mask = idt_ntb_db_read_mask,
+ .db_set_mask = idt_ntb_db_set_mask,
+ .db_clear_mask = idt_ntb_db_clear_mask,
+ .peer_db_set = idt_ntb_peer_db_set,
+ .msg_post = idt_ntb_msg_post,
+ .msg_size = idt_ntb_msg_size
+};
+
+/*
+ * NTB devices registration function
+ */
+static int idt_ntb_register_devs(struct idt_ntb_data *pdata)
+{
+ struct idt_ntb_dev *ndev;
+ int id, ret;
+
+ /* Loop over all the NTB devices initializing the necessary fields */
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ /* Retrieve the current NTB device */
+ ndev = &pdata->ndevs[id];
+
+ /* Set the device operation callbacks */
+ ndev->ntb.ops = &idt_ntb_ops;
+
+ /* Register the device */
+ ret = ntb_register_device(&ndev->ntb);
+ if (SUCCESS != ret) {
+ dev_err_data(pdata, "Failed to register NTB device");
+ goto err_unregister_device;
+ }
+ }
+
+ dev_dbg_data(pdata, "IDT NTB device(s) successfully registered");
+
+ return SUCCESS;
+
+err_unregister_device:
+ for (id--; 0 <= id; id--) {
+ ndev = &pdata->ndevs[id];
+ ntb_unregister_device(&ndev->ntb);
+ }
+
+ return ret;
+}
+
+/*
+ * NTB devices unregistration function
+ */
+static void idt_ntb_unregister_devs(struct idt_ntb_data *pdata)
+{
+ struct idt_ntb_dev *ndev;
+ int id;
+
+ /* Loop over all the NTB devices initializing the necessary fields */
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ /* Retrieve the current NTB device */
+ ndev = &pdata->ndevs[id];
+
+ /* Just unregister the device */
+ ntb_unregister_device(&ndev->ntb);
+ }
+
+ dev_dbg_data(pdata, "IDT NTB devices are practically unregistered");
+}
+
+/*===========================================================================
+ * 9. IDT NT-functions topology
+ *===========================================================================*/
+
+/*
+ * Add the NT-function pair of Primary and Secondary ports to the topology
+ */
+static inline void idt_ntb_addntb(struct idt_ntb_topo *topo,
+ const unsigned char pri,
+ const unsigned char sec)
+{
+ topo->priports |= ((u32)1 << pri);
+ topo->secports[pri] |= ((u32)1 << sec);
+}
+
+/*
+ * Retrieve the port role
+ */
+static inline enum ntb_topo idt_ntb_portrole(const struct idt_ntb_topo *topo,
+ const unsigned char port)
+{
+ return ((topo->priports & ((u32)1 << port)) ?
+ NTB_TOPO_PRI : NTB_TOPO_SEC);
+}
+
+/*
+ * Function first checks whether the port can have an NT-function then whether
+ * the function is activated on the port
+ */
+static int idt_ntb_checkport(const struct idt_ntb_data *pdata,
+ const unsigned char port)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ unsigned char pid;
+ u32 sts, mode;
+ int stat = -EINVAL;
+
+ /* Check whether the port can have the NT-function */
+ for (pid = 0; pid < pdata->swcfg->port_cnt; pid++) {
+ if (pdata->swcfg->ports[pid] == port) {
+ stat = SUCCESS;
+ break;
+ }
+ }
+ /* Return -EINVAL if it can't */
+ if (SUCCESS != stat) {
+ return -EINVAL;
+ }
+
+ /* Get the port status so to determine the port mode */
+ sts = idt_ntb_readreg(cfg, portdata_tbl[port].sts);
+ mode = idt_ntb_readfld_var(sts, IDT_SW_PORT_MODE);
+
+ /* Check whther the port has the NT-function */
+ if (PORTMODE_NT != mode && PORTMODE_USNT != mode &&
+ PORTMODE_USNTDMA != mode) {
+ return -EINVAL;
+ }
+
+ return SUCCESS;
+}
+
+/*
+ * Scan the IDT NT-function topology by reading the NTSDATA register
+ * That register is initialized with the Primary port number of the
+ * corresponding secondary ports. Of course the algorithm doesn't permit the
+ * two Primary ports pointing to each other.
+ */
+static int idt_ntb_scantopo(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ struct idt_ntb_topo *topo = &pdata->topo;
+ unsigned char pid;
+ unsigned long port;
+ u32 priport;
+ int ret;
+
+ /* Clean the topo structure */
+ memset(topo, 0, sizeof(*topo));
+
+ /* Walk through all the available ports checking whether the
+ * NT-function enabled on them. If so retrieve its Primary side port */
+ for (pid = 0; pid < pdata->swcfg->port_cnt; pid++) {
+ /* Retrieve the port number */
+ port = pdata->swcfg->ports[pid];
+
+ /* Check whether the port has the NT-function
+ * NOTE Within this loop we are sure it can */
+ if (SUCCESS == idt_ntb_checkport(pdata, port)) {
+ /* If it does then read it's NTSDATA interpreting its
+ * value as the Primary port number */
+ priport = idt_ntb_readreg(cfg,
+ portdata_tbl[port].ntsdata);
+
+ /* Add the NTB to the topology only if the retrieved
+ * primary port can have NT-function and have it
+ * activated */
+ ret = idt_ntb_checkport(pdata, priport);
+ if (SUCCESS == ret && port != priport) {
+ idt_ntb_addntb(topo, priport, port);
+ /* Increment the number of NTB pairs */
+ topo->paircnt++;
+ }
+
+ /* If the retrieved port either can't have the
+ * NT-function or doesn't have NT-function activated
+ * then the topology is corrupted */
+ if (SUCCESS != ret) {
+ dev_err_data(pdata,
+ "Invalid primary NT port %u was read",
+ priport);
+ return -EINVAL;
+ }
+ } /* else { just skip it }*/
+ }
+
+ /* Check the topology consistency to make sure it is just downwards
+ * directional tree graph with two levels: one primary root and
+ * a number of secondary lists (can be none) */
+ for_each_set_bit_u32(topo->priports, port) {
+ /* Check whether there is no any Primary port amongst the
+ * Secondary ports */
+ if (topo->secports[port] & topo->priports) {
+ dev_err_data(pdata,
+ "Port %lu has Primary and Secondary roles,"
+ "IDT NTB topology is inconsistent", port);
+ return -EINVAL;
+ }
+ }
+
+ dev_dbg_data(pdata, "IDT NTB functions topology has been scanned");
+
+ return SUCCESS;
+}
+
+/*
+ * Create set of Secondary sided peer devices of the topology
+ * The function is used by the Primary side of the topology
+ */
+static int idt_ntb_secpeers(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ struct idt_ntb_topo *topo = &pdata->topo;
+ u32 secports, portsts;
+ unsigned char id = 0;
+ unsigned long port;
+ int node;
+
+ /* Get the set of the Secondary ports of the current Primary port */
+ secports = topo->secports[pdata->port];
+
+ /* Calculate the number of peers */
+ pdata->peer_cnt = hweight32(secports);
+
+ /* Allocate the memory for all the peers IDT NTB device structures */
+ node = dev_to_node(to_dev_data(pdata));
+ pdata->ndevs = kzalloc_node(pdata->peer_cnt*sizeof(*pdata->ndevs),
+ GFP_KERNEL, node);
+ if (IS_ERR_OR_NULL(pdata->ndevs)) {
+ dev_err_data(pdata,
+ "Failed to allocate memory for Secondary peer devices");
+ return -ENOMEM;
+ }
+
+ /* Walk through all the secondary ports initializing the
+ * corresponding NTB device and data fields */
+ for_each_set_bit_u32(secports, port) {
+ /* Read the port status register to retrieve the partition */
+ portsts = idt_ntb_readreg(cfg, portdata_tbl[port].sts);
+
+ /* Save the port and partition numbers */
+ pdata->ndevs[id].port = port;
+ pdata->ndevs[id].part =
+ idt_ntb_readfld_var(portsts, IDT_SW_PORT_SWPART);
+
+ /* Initialize the local topology and PCI device fields */
+ pdata->ndevs[id].ntb.topo = pdata->role;
+ pdata->ndevs[id].ntb.pdev = pdata->pdev;
+
+ /* Increment the device id number */
+ id++;
+ }
+
+ return SUCCESS;
+}
+
+/*
+ * Create Primary sided peer device of the topology
+ * The function is used by the Secondary side of the topology
+ */
+static int idt_ntb_pripeer(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ u32 priport, portsts;
+ int node;
+
+ /* Get the Primary port of the current port */
+ priport = idt_ntb_readreg(cfg, portdata_tbl[pdata->port].ntsdata);
+
+ /* There is going to be just one peer */
+ pdata->peer_cnt = 1;
+
+ /* Allocate the memory for IDT NTB device structure of just one peer */
+ node = dev_to_node(to_dev_data(pdata));
+ pdata->ndevs = kzalloc_node(sizeof(*pdata->ndevs), GFP_KERNEL, node);
+ if (IS_ERR_OR_NULL(pdata->ndevs)) {
+ dev_err_data(pdata,
+ "Failed to allocate memory for Primary peer device");
+ return -ENOMEM;
+ }
+
+ /* Read the port status register to retrieve the partition */
+ portsts = idt_ntb_readreg(cfg, portdata_tbl[priport].sts);
+
+ /* Save the peer id, port and partition numbers */
+ pdata->ndevs->port = priport;
+ pdata->ndevs->part = idt_ntb_readfld_var(portsts, IDT_SW_PORT_SWPART);
+
+ /* Initialize the local topology and PCI device fields */
+ pdata->ndevs->ntb.topo = pdata->role;
+ pdata->ndevs->ntb.pdev = pdata->pdev;
+
+ return SUCCESS;
+}
+
+/*
+ * Enumerate the peer pairs
+ *
+ * Basically the pairid is just the order number of the corresponding
+ * Secondary side port. So the function just loop over the Primary ports.
+ * If the local port is Primary then just linearly enumerate its peers
+ * starting from the corresponding number.
+ * If the local port is Secondary then the function walks through
+ * all the Secondary port of the corresponding Primary port looking
+ * for the current one to assign the simultaniously incremented id.
+ */
+static void idt_ntb_enumpairs(struct idt_ntb_data *pdata)
+{
+ struct idt_ntb_topo *topo = &pdata->topo;
+ unsigned char id, pairid = 0;
+ unsigned long priport, secport;
+ u32 secports;
+
+ /* Loop over all the Primary ports calculating the pairids */
+ for_each_set_bit_u32(topo->priports, priport) {
+ /* Retrieve the Secondary ports connected to the current
+ * Primary one */
+ secports = topo->secports[priport];
+
+ /* Enumerate the current port related pairs */
+ /* If current port is Primary then enumerate its peers */
+ if (NTB_TOPO_PRI == pdata->role && priport == pdata->port) {
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ pdata->ndevs[id].pairid = pairid + id;
+ }
+ /* Stop looping, the job is done */
+ break;
+ }
+ /* If the current port is Secondary then retrieve its peer id
+ * within the corresponding Primary port */
+ else if (NTB_TOPO_SEC == pdata->role &&
+ priport == pdata->ndevs[0].port) {
+ id = 0;
+ for_each_set_bit_u32(secports, secport) {
+ if (secport == pdata->port) {
+ pdata->ndevs[0].pairid = pairid + id;
+ break;
+ }
+ id++;
+ }
+ /* Stop looping, the job is done */
+ break;
+ }
+
+ /* Increment the pairid with the number of the related Secondary
+ * ports */
+ pairid += hweight32(secports);
+ }
+}
+
+/*
+ * Create the NTB devices with respect to the topology
+ */
+static int idt_ntb_addpeers(struct idt_ntb_data *pdata)
+{
+ void __iomem *cfg = pdata->cfg_mmio;
+ struct idt_ntb_topo *topo = &pdata->topo;
+ u32 portsts;
+ int ret;
+
+ /* Retrieve the current port number */
+ pdata->port = idt_ntb_readfld_mem(cfg, IDT_NT_PORTNUM);
+
+ /* Read the current port partition number */
+ portsts = idt_ntb_readreg(cfg, portdata_tbl[pdata->port].sts);
+ pdata->part = idt_ntb_readfld_var(portsts, IDT_SW_PORT_SWPART);
+
+ /* Check whether the current port role is Primary or Secondary */
+ pdata->role = idt_ntb_portrole(topo, pdata->port);
+
+ /* Create either the Primary or Secondary side peers set */
+ ret = (NTB_TOPO_PRI == pdata->role) ?
+ idt_ntb_secpeers(pdata) : idt_ntb_pripeer(pdata);
+ if (SUCCESS != ret) {
+ return ret;
+ }
+
+ /* Enumerate all the NTB connected pairs */
+ idt_ntb_enumpairs(pdata);
+
+ dev_dbg_data(pdata, "IDT NTB peer devices created");
+
+ return SUCCESS;
+}
+
+/*
+ * Remove the peer NTB devices added to the data structure
+ */
+static void idt_ntb_delpeers(struct idt_ntb_data *pdata)
+{
+ /* Release the memory occupied by the */
+ kfree(pdata->ndevs);
+
+ dev_dbg_data(pdata, "IDT NTB peer devices discarded");
+}
+
+/*===========================================================================
+ * 10. Basic initialization functions
+ *===========================================================================*/
+
+/*
+ * Check whether the device is properly pre-initialized
+ */
+static int idt_ntb_check_quirks(struct pci_dev *pdev)
+{
+ u32 data, fld;
+ int ret;
+
+ /* Read the BARSETUP0 */
+ ret = pci_read_config_dword(pdev, BARSETUP0_OFF, &data);
+ if (SUCCESS != ret) {
+ dev_err(&pdev->dev,
+ "Failed to read BARSETUP0 configuration register");
+ return ret;
+ }
+
+ /* Check whether the BAR0 register is enabled */
+ if (OFF == idt_ntb_readfld_var(data, IDT_NT_BARSTP_EN)) {
+ dev_err(&pdev->dev,
+ "BAR0 isn't enabled");
+ return -EINVAL;
+ }
+
+ /* Check whether the BAR0 maps the registers configuration space */
+ fld = idt_ntb_readfld_var(data, IDT_NT_BARSTP_MODE);
+ if (BARSTP_MODE_CFGSPC != fld) {
+ dev_err(&pdev->dev,
+ "BAR0 isn't configured to map the configuration space");
+ return -EINVAL;
+ }
+
+ /* Read the BARSETUP2 */
+ ret = pci_read_config_dword(pdev, BARSETUP2_OFF, &data);
+ if (SUCCESS != ret) {
+ dev_err(&pdev->dev,
+ "Failed to read BARSETUP2 configuration register");
+ return ret;
+ }
+
+ /* Check whether the BAR2 register is enabled */
+ if (OFF == idt_ntb_readfld_var(data, IDT_NT_BARSTP_EN)) {
+ dev_err(&pdev->dev,
+ "BAR2 isn't enabled");
+ return -EINVAL;
+ }
+
+ /* Check whether the BAR2 maps memory windows */
+ fld = idt_ntb_readfld_var(data, IDT_NT_BARSTP_MODE);
+ if (BARSTP_MODE_WNDW != fld) {
+ dev_err(&pdev->dev,
+ "BAR2 isn't configured to map memory windows");
+ return -EINVAL;
+ }
+
+ /* Check whether the BAR2 maps the 24-entries lookup table */
+ fld = idt_ntb_readfld_var(data, IDT_NT_BARSTP_ATRAN);
+ if (BARSTP_ATRAN_LU24 != fld) {
+ dev_err(&pdev->dev,
+ "BAR2 isn't configured to map 24-entries lookup table");
+ return -EINVAL;
+ }
+
+ return SUCCESS;
+}
+
+/*
+ * Create the IDT PCIe-swtich driver data structure performing the basic
+ * initialization
+ */
+static struct idt_ntb_data *idt_ntb_create_data(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct idt_ntb_data *pdata;
+ int node;
+
+ /* Allocate the memory at the device NUMA node */
+ node = dev_to_node(&pdev->dev);
+ pdata = kzalloc_node(sizeof(*pdata), GFP_KERNEL, node);
+ if (IS_ERR_OR_NULL(pdata)) {
+ dev_err(&pdev->dev,
+ "Failed to allocate memory for IDT NTB driver data");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* Create the workqueue used by the driver */
+ pdata->idt_wq = create_workqueue(NTB_WQNAME);
+ if (IS_ERR_OR_NULL(pdata->idt_wq)) {
+ dev_err(&pdev->dev, "Failed to create workqueue");
+ goto err_kfree;
+ }
+
+ /* Put the IDT driver data pointer to the PCI-device private pointer */
+ pci_set_drvdata(pdev, pdata);
+ /* Save the PCI-device pointer inside the data structure */
+ pdata->pdev = pdev;
+ /* Save the IDT PCIe-switch ports configuration */
+ pdata->swcfg = (struct idt_89hpes_pdata *)id->driver_data;
+
+ dev_dbg_data(pdata, "IDT NTB device data created");
+
+ return pdata;
+
+err_kfree:
+ kfree(pdata);
+
+ return NULL;
+}
+
+/*
+ * Free the IDT PCie-swtich driver data structure
+ */
+static void idt_ntb_free_data(struct idt_ntb_data *pdata)
+{
+ struct pci_dev *pdev = pdata->pdev;
+
+ /* Flush and destroy the workqueue */
+ flush_workqueue(pdata->idt_wq);
+ destroy_workqueue(pdata->idt_wq);
+
+ /* Clean the private data pointer of the PCI-device structure */
+ pci_set_drvdata(pdev, NULL);
+
+ /* Free the memory allocated for the IDT NTB driver data */
+ kfree(pdata);
+
+ dev_dbg(&pdev->dev, "IDT NTB device data discarded");
+}
+
+/*
+ * Initialize the basic PCI-related subsystem
+ */
+static int idt_ntb_init_pci(struct idt_ntb_data *pdata)
+{
+ struct pci_dev *pdev = pdata->pdev;
+ int ret;
+
+ /* Enable the device advanced error reporting. Don't check the return
+ * value since the service might be disabled from the kernel */
+ ret = pci_enable_pcie_error_reporting(pdev);
+ if (SUCCESS != ret) {
+ dev_err_data(pdata, "Failed to enable AER capability of IDT NTB");
+ }
+ /* Cleanup the uncorrectable error status before starting the rest of
+ * initialization */
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+
+ /* First enable the PCI device */
+ ret = pci_enable_device(pdev);
+ if (SUCCESS != ret) {
+ dev_err_data(pdata, "Failed to enable the PCI device");
+ goto err_disable_aer;
+ }
+
+ /* Reguest the PCI device resources like the BAR memory mapping, etc
+ * It's done for BAR0 for now */
+ ret = pci_request_region(pdev, BAR0, NTB_NAME);
+ if (SUCCESS != ret) {
+ dev_err_data(pdata,
+ "Failed to request the PCI BAR0 resources");
+ goto err_disable_device;
+ }
+
+ /* Initialize the bit mask of DMA although I don't see where it can be
+ * used for now */
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (SUCCESS != ret) {
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (SUCCESS != ret) {
+ dev_err_data(pdata, "Failed to set any DMA bit mask\n");
+ goto err_release_region;
+ }
+ dev_warn_data(pdata, "Cannot set the DMA highmem bit mask\n");
+ }
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (SUCCESS != ret) {
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (SUCCESS != ret) {
+ dev_err_data(pdata,
+ "Failed to set any consistent DMA bit mask\n");
+ goto err_release_region;
+ }
+ dev_warn_data(pdata,
+ "Cannot set the consistent DMA highmem bit mask\n");
+ }
+
+ /* Retrieve the virtual address of the PCI configuration space */
+ pdata->cfg_mmio = pci_iomap(pdev, BAR0, 0);
+ if (IS_ERR_OR_NULL(pdata->cfg_mmio)) {
+ dev_err_data(pdata,
+ "Failed to map the IDT NT-function config space\n");
+ ret = -EIO;
+ goto err_release_region;
+ }
+
+ dev_dbg_data(pdata, "IDT NTB function PCI interface was initialized");
+
+ return SUCCESS;
+
+err_disable_aer:
+ (void)pci_disable_pcie_error_reporting(pdev);
+err_release_region:
+ pci_release_region(pdev, BAR0);
+err_disable_device:
+ pci_disable_device(pdev);
+
+ return ret;
+}
+
+/*
+ * Deinitialize the basic PCI-related subsystem
+ */
+static void idt_ntb_deinit_pci(struct idt_ntb_data *pdata)
+{
+ struct pci_dev *pdev = pdata->pdev;
+
+ /* Disable the AER capability */
+ (void)pci_disable_pcie_error_reporting(pdev);
+
+ /* Unmap the IDT PCIe-switch configuration space */
+ pci_iounmap(pdev, pdata->cfg_mmio);
+
+ /* Release the PCI-device BAR0 resources */
+ pci_release_region(pdev, BAR0);
+
+ /* Finally disable the PCI device */
+ pci_disable_device(pdev);
+
+ dev_dbg_data(pdata, "IDT NTB function PCI interface was cleaned");
+}
+
+/*===========================================================================
+ * 11. DebugFS callback functions
+ *===========================================================================*/
+
+static ssize_t idt_ntb_dbgfs_info_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp);
+
+static ssize_t idt_ntb_dbgfs_ntregs_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp);
+
+static ssize_t idt_ntb_dbgfs_swregs_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp);
+
+/*
+ * Driver DebugFS info file operations
+ */
+static const struct file_operations idt_ntb_dbgfs_info_ops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = idt_ntb_dbgfs_info_read
+};
+
+/*
+ * Driver DebugFS NT registers file operations
+ */
+static const struct file_operations idt_ntb_dbgfs_ntregs_ops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = idt_ntb_dbgfs_ntregs_read
+};
+
+/*
+ * Driver DebugFS IDT PCIe-swtich global registers file operations
+ */
+static const struct file_operations idt_ntb_dbgfs_swregs_ops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = idt_ntb_dbgfs_swregs_read
+};
+
+/*
+ * DebugFS read info node callback
+ */
+static ssize_t idt_ntb_dbgfs_info_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ struct idt_ntb_data *pdata = filp->private_data;
+ void __iomem *cfg = pdata->cfg_mmio;
+ enum ntb_speed speed;
+ enum ntb_width width;
+ char *strbuf;
+ size_t size;
+ ssize_t ret = 0, off = 0;
+ u32 var;
+ int id, sts, part, bdf, port;
+ unsigned char temp, frac;
+
+ /* Lets limit the buffer size the way the Intel/AMD drivers do */
+ size = min_t(size_t, count, 0x1000U);
+
+ /* Allocate the memory for the buffer */
+ strbuf = kmalloc(size, GFP_KERNEL);
+ if (NULL == strbuf) {
+ return -ENOMEM;
+ }
+
+ /* Put the data into the string buffer */
+ off += scnprintf(strbuf + off, size - off,
+ "\n\t\tIDT PCIe-switch NT-function Information:\n\n");
+
+ /* General device configurations */
+ off += scnprintf(strbuf + off, size - off,
+ "Switch port\t\t\t- %hhu\n", pdata->port);
+ off += scnprintf(strbuf + off, size - off,
+ "Port partition\t\t\t- %hhu\n", pdata->part);
+ off += scnprintf(strbuf + off, size - off,
+ "Number of peers\t\t\t- %hhu\n", pdata->peer_cnt);
+
+ /* Local switch NT-function role topology and available port to
+ * communicate to */
+ off += scnprintf(strbuf + off, size - off,
+ "NT-function role\t\t- %s\n", ntb_topo_string(pdata->role));
+ off += scnprintf(strbuf + off, size - off,
+ "Peer Port:Partition available\t- ");
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ off += scnprintf(strbuf + off, size - off,
+ "%hhd:%hhd ",
+ pdata->ndevs[id].port, pdata->ndevs[id].part);
+ }
+ off += scnprintf(strbuf + off, size - off, "\n");
+
+ /* Links status */
+ var = idt_ntb_readreg(cfg, portdata_tbl[pdata->port].sts);
+ if (idt_ntb_readfld_var(var, IDT_SW_PORT_LNKUP)) {
+ off += scnprintf(strbuf + off, size - off,
+ "Local Port Link status\t\t- ");
+ var = idt_ntb_readreg(cfg, IDT_NT_PCI_PCIELSTS);
+ off += scnprintf(strbuf + off, size - off,
+ "PCIe Gen %u ",
+ idt_ntb_readfld_var(var, IDT_NT_CURLNKSPD));
+ off += scnprintf(strbuf + off, size - off,
+ "x%u lanes\n",
+ idt_ntb_readfld_var(var, IDT_NT_CURLNKWDTH));
+ } else {
+ off += scnprintf(strbuf + off, size - off,
+ "Local port link status\t\t- Down (Weird)\n");
+ }
+ off += scnprintf(strbuf + off, size - off,
+ "Peer ports link status\t\t- ");
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ sts = idt_ntb_link_is_up(&pdata->ndevs[id].ntb, &speed, &width);
+ if (ON == sts) {
+ off += scnprintf(strbuf + off, size - off,
+ "%hhd:Gen %u x%u, ", pdata->ndevs[id].port, speed, width);
+ } else /* if (OFF == sts) */ {
+ off += scnprintf(strbuf + off, size - off,
+ "%hhd:Down, ", pdata->ndevs[id].port);
+ }
+ }
+ off += scnprintf(strbuf + off, size - off, "\n");
+
+ /* General resources information */
+ off += scnprintf(strbuf + off, size - off,
+ "Total doorbells count\t\t- %u\n", IDT_NTB_DBELL_CNT);
+ off += scnprintf(strbuf + off, size - off,
+ "Total memory windows count\t- %u\n", IDT_NTB_MW_CNT);
+ off += scnprintf(strbuf + off, size - off,
+ "Total message registers count\t- %u\n", IDT_NTB_MSG_CNT);
+
+ /* Common resources state */
+ var = idt_ntb_readreg(cfg, IDT_SW_PCI_GDBELLSTS);
+ off += scnprintf(strbuf + off, size - off,
+ "Global doorbells status\t\t- %#010x\n", var);
+ var = idt_ntb_readreg(cfg, IDT_NT_PCI_INDBELLSTS);
+ off += scnprintf(strbuf + off, size - off,
+ "Local doorbells status\t\t- %#010x\n", var);
+ off += scnprintf(strbuf + off, size - off,
+ "Mirror doorbells value\t\t- %#010x\n",
+ pdata->db_sts);
+ var = idt_ntb_readreg(cfg, IDT_NT_PCI_INDBELLMSK);
+ off += scnprintf(strbuf + off, size - off,
+ "Local doorbells mask\t\t- %#010x\n", var);
+ off += scnprintf(strbuf + off, size - off,
+ "Mirror doorbells mask value\t- %#010x\n",
+ pdata->db_msk);
+
+ /* Per-device resources */
+ for (id = 0; id < pdata->peer_cnt; id++) {
+ off += scnprintf(strbuf + off, size - off,
+ "Port %hhd (pair id %hhd)\n",
+ pdata->ndevs[id].port, pdata->ndevs[id].pairid);
+ off += scnprintf(strbuf + off, size - off,
+ "\tDoorbells share\t- "
+ "local %#010x offset %hhu, peer %#010x offset %hhu\n",
+ pdata->ndevs[id].db_self_mask,
+ pdata->ndevs[id].db_self_offset,
+ pdata->ndevs[id].db_peer_mask,
+ pdata->ndevs[id].db_peer_offset);
+ off += scnprintf(strbuf + off, size - off,
+ "\tDoorbells\t- count %hhu, valid mask: %#010x,\n",
+ pdata->ndevs[id].db_cnt,
+ pdata->ndevs[id].db_valid_mask);
+ off += scnprintf(strbuf + off, size - off,
+ "\tMemory windows\t- local/peer count %hhu/%hhu, "
+ "size %u bytes, local offset: %hhu\n",
+ pdata->ndevs[id].mw_self_cnt,
+ pdata->ndevs[id].mw_peer_cnt,
+ (unsigned int)pdata->mw_size,
+ pdata->ndevs[id].mw_self_offset);
+ }
+
+ /* Doorbells mapping */
+ off += scnprintf(strbuf + off, size - off,
+ "\nInbound db:part mapping\n\t");
+ for (id = 0; id < IDT_NTB_DBELL_CNT; id++) {
+ var = idt_ntb_readreg(cfg, IDT_SW_PCI_GIDBELLMSK0 + id);
+ off += scnprintf(strbuf + off, size - off, "%02d:", id);
+ for_each_set_bit_u32(~var & 0xFF, part) {
+ off += scnprintf(strbuf + off, size - off, "%d,", part);
+ }
+ off += scnprintf(strbuf + off, size - off, "\b; ");
+ if (0 == ((id + 1) % 10)) {
+ off += scnprintf(strbuf + off, size - off, "\n\t");
+ }
+ }
+ off += scnprintf(strbuf + off, size - off,
+ "\nOutbound db:part mapping\n\t");
+ for (id = 0; id < IDT_NTB_DBELL_CNT; id++) {
+ var = idt_ntb_readreg(cfg, IDT_SW_PCI_GODBELLMSK0 + id);
+ off += scnprintf(strbuf + off, size - off, "%02d:", id);
+ for_each_set_bit_u32(~var & 0xFF, part) {
+ off += scnprintf(strbuf + off, size - off,
+ "%d,", part);
+ }
+ off += scnprintf(strbuf + off, size - off, "\b; ");
+ if (0 == ((id + 1) % 10)) {
+ off += scnprintf(strbuf + off, size - off, "\n\t");
+ }
+ }
+ off += scnprintf(strbuf + off, size - off, "\n");
+
+ /* NTB control register */
+ var = idt_ntb_readreg(cfg, IDT_NT_PCI_NTCTL);
+ off += scnprintf(strbuf + off, size - off,
+ "\nNTB control register\t- %#010x\n", var);
+
+ /* NTB Mapping table */
+ off += scnprintf(strbuf + off, size - off,
+ "NTB mapping table\n");
+ for (id = 0; id < IDT_NTB_MTBL_ENTRY_CNT; id++) {
+ idt_ntb_writereg(cfg, IDT_NT_PCI_NTMTBLADDR, (u32)id);
+ var = idt_ntb_readreg(cfg, IDT_NT_PCI_NTMTBLDATA);
+ if (ON == idt_ntb_readfld_var(var, IDT_NT_MTBL_VALID)) {
+ bdf = idt_ntb_readfld_var(var, IDT_NT_MTBL_BDF);
+ off += scnprintf(strbuf + off, size - off,
+ "\t%02d: part %d, bus %d, dev %d, func %d\n",
+ id, idt_ntb_readfld_var(var, IDT_NT_MTBL_PART),
+ (bdf >> 8) & 0xFF, (bdf >> 3) & 0x1F, bdf & 7);
+ }
+ }
+
+ /* Currently enabled IRQs */
+ off += scnprintf(strbuf + off, size - off, "\nNTB interrupts status\n");
+ var = idt_ntb_readreg(cfg, IDT_NT_PCI_NTINTMSK);
+ for_each_set_bit_u32(ALLINT_MASK, id) {
+ switch (id) {
+ case MSGINT_BIT:
+ off += scnprintf(strbuf + off, size - off,
+ "\tMessage interrupts\t\t\t\t- ");
+ break;
+ case DBINT_BIT:
+ off += scnprintf(strbuf + off, size - off,
+ "\tDoorbell interrupts\t\t\t\t- ");
+ break;
+ case SEINT_BIT:
+ off += scnprintf(strbuf + off, size - off,
+ "\tSwitch event interrupts\t\t\t\t- ");
+ break;
+ case FMCI_BIT:
+ off += scnprintf(strbuf + off, size - off,
+ "\tFailover mode change initiated IRQ\t\t- ");
+ break;
+ case FMCC_BIT:
+ off += scnprintf(strbuf + off, size - off,
+ "\tFailover mode change completed IRQ\t\t- ");
+ break;
+ case TEMPINT_BIT:
+ off += scnprintf(strbuf + off, size - off,
+ "\tTemperature sensor IRQ (T < %d || %d < T)\t- ",
+ IDT_NTB_TEMP_LTH, IDT_NTB_TEMP_HTH);
+ break;
+ default:
+ off += scnprintf(strbuf + off, size - off,
+ "\tWarning! Invalid bit is set in the NTINTMSK register\n");
+ break;
+ }
+
+ if (0x0 == (var & BIT_MASK(id))) {
+ off += scnprintf(strbuf + off, size - off,
+ "enabled\n");
+ } else {
+ off += scnprintf(strbuf + off, size - off,
+ "disabled\n");
+ }
+ }
+
+ /* Put the data into the string buffer */
+ off += scnprintf(strbuf + off, size - off,
+ "\n\t\tIDT PCIe-switch general configuration:\n\n");
+
+ /* Boot configuration vector status */
+ var = idt_ntb_readreg(cfg, IDT_SW_PCI_BCVSTS);
+ off += scnprintf(strbuf + off, size - off,
+ "Switch boot mode\n\t");
+ switch (idt_ntb_readfld_var(var, IDT_SW_SWMODE)) {
+ case (0x0):
+ off += scnprintf(strbuf + off, size - off,
+ "Single Partition\n");
+ break;
+ case (0x1):
+ off += scnprintf(strbuf + off, size - off,
+ "Single Partition with Serial EEPROM\n");
+ break;
+ case (0x2):
+ off += scnprintf(strbuf + off, size - off,
+ "Single Partition with Serial EEPROM Jump 0 "
+ "Initialization\n");
+ break;
+ case (0x3):
+ off += scnprintf(strbuf + off, size - off,
+ "Single Partition with Serial EEPROM Jump 1 "
+ "Initialization\n");
+ break;
+ case (0x8):
+ off += scnprintf(strbuf + off, size - off,
+ "Single partition with reduced latency\n");
+ break;
+ case (0x9):
+ off += scnprintf(strbuf + off, size - off,
+ "Single partition with Serial EEPROM initialization "
+ "and reduced latency\n");
+ break;
+ case (0xA):
+ off += scnprintf(strbuf + off, size - off,
+ "Multi-partition with Unattached ports\n");
+ break;
+ case (0xB):
+ off += scnprintf(strbuf + off, size - off,
+ "Multi-partition with Unattached ports and i2c Reset\n");
+ break;
+ case (0xC):
+ off += scnprintf(strbuf + off, size - off,
+ "Multi-partition with Unattached ports and Serial EEPROM "
+ "initialization\n");
+ break;
+ case (0xD):
+ off += scnprintf(strbuf + off, size - off,
+ "Multi-partition with Unattached ports with i2c Reset "
+ "and Serial EEPROM initialization\n");
+ break;
+ case (0xE):
+ off += scnprintf(strbuf + off, size - off,
+ "Multi-partition with Disabled ports\n");
+ break;
+ case (0xF):
+ off += scnprintf(strbuf + off, size - off,
+ "Multi-partition with Disabled ports and Serial EEPROM "
+ "initialization\n");
+ break;
+ default:
+ off += scnprintf(strbuf + off, size - off,
+ "Unknown\n");
+ break;
+ }
+ off += scnprintf(strbuf + off, size - off,
+ "Switch boot clock mode\n\t");
+ switch (idt_ntb_readfld_var(var, IDT_SW_CLKMODE)) {
+ case (0x0):
+ off += scnprintf(strbuf + off, size - off,
+ "Port 0\t\t- non-common global clocked\n"
+ "\tOther ports\t- non-common global clocked\n");
+ break;
+ case (0x1):
+ off += scnprintf(strbuf + off, size - off,
+ "Port 0\t\t- Common global clocked\n"
+ "\tOther ports\t- non-common global clocked\n");
+ break;
+ case (0x2):
+ off += scnprintf(strbuf + off, size - off,
+ "Port 0\t\t- non-common global clocked\n"
+ "\tOther ports\t- common global clocked\n");
+ break;
+ case (0x3):
+ off += scnprintf(strbuf + off, size - off,
+ "Port 0\t\t- common global clocked\n"
+ "\tOther ports\t- common global clocked\n");
+ break;
+ default:
+ off += scnprintf(strbuf + off, size - off,
+ "Unknown\n");
+ break;
+ }
+
+ /* Per-port link status and clock configuration */
+ off += scnprintf(strbuf + off, size - off,
+ "Ports clocking status\n");
+ var = idt_ntb_readreg(cfg, IDT_SW_PCI_PCLKMODE);
+ for (id = 0; id < pdata->swcfg->port_cnt; id++) {
+ port = pdata->swcfg->ports[id];
+ sts = idt_ntb_readreg(cfg, portdata_tbl[port].pcielsts);
+ off += scnprintf(strbuf + off, size - off,
+ "\tPort %d\t- %s %s mode\n", port,
+ idt_ntb_readfld_var(sts, IDT_NT_SCLK) ?
+ "common" : "non-common",
+ idt_ntb_readfld_var(var, IDT_SW_P0CLKMODE + id) ?
+ "local" : "global");
+ }
+
+ /* SMBus configuration */
+ var = idt_ntb_readreg(cfg, IDT_SW_PCI_SMBUSSTS);
+ off += scnprintf(strbuf + off, size - off,
+ "Slave SMBus address\t- %#04x\n",
+ idt_ntb_readfld_var(var, IDT_SW_SSMBADDR));
+ off += scnprintf(strbuf + off, size - off,
+ "Master SMBus address\t- %#04x\n",
+ idt_ntb_readfld_var(var, IDT_SW_MSMBADDR));
+
+ /* Current temperature */
+ var = idt_ntb_readfld_mem(cfg, IDT_SW_TMP_CURTEMP);
+ idt_ntb_convert_temp(var, &temp, &frac);
+ off += scnprintf(strbuf + off, size - off,
+ "Switch temperature\t- %d.%dC\n", temp, (0 != frac) ? 5 : 0);
+
+ /* Copy the buffer to the User Space */
+ ret = simple_read_from_buffer(ubuf, count, offp, strbuf, off);
+ kfree(strbuf);
+
+ return ret;
+}
+
+/*
+ * Read passed set of registers method for DebugFS nodes
+ */
+static ssize_t idt_ntb_dbgfs_regs_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp,
+ enum idt_ntb_cfgreg start,
+ enum idt_ntb_cfgreg end,
+ const char *title)
+{
+ struct idt_ntb_data *pdata = filp->private_data;
+ void __iomem *cfg = pdata->cfg_mmio;
+ enum idt_ntb_cfgreg reg;
+ enum idt_ntb_regtype regtype;
+ ptrdiff_t regoffset;
+ enum idt_ntb_regsize regsize;
+ const char *regdesc;
+ u32 data;
+ char *strbuf;
+ size_t size;
+ ssize_t ret = 0, off = 0;
+
+ /* Lets limit the buffer size the way the Intel/AMD drivers do */
+ size = min_t(size_t, count, 0x4000U);
+
+ /* Allocate the memory for the buffer */
+ strbuf = kmalloc(size, GFP_KERNEL);
+ if (NULL == strbuf) {
+ return -ENOMEM;
+ }
+
+ /* Put the title first */
+ off += scnprintf(strbuf + off, size - off, "\n\t\t%s\n\n", title);
+
+ /* Print the header of the registers */
+ off += scnprintf(strbuf + off, size - off, " 03 02 01 00\n");
+
+ /* Scan through the whole passed range reading the addresses, values
+ * and description and printing it to the buffer */
+ for (reg = start; reg < end; reg++) {
+ /* Retrieve the register type, offset, size and description */
+ idt_ntb_regparams(reg, ®type, ®offset, ®size, ®desc);
+
+ /* Read the value of the corresponding register */
+ data = idt_ntb_readreg(cfg, reg);
+
+ /* Print the register offset */
+ off += scnprintf(strbuf + off, size - off,
+ "0x%05lX: ", (unsigned long)regoffset);
+
+ /* Then print the value of the register in compliance with the
+ * register size */
+ switch (regsize) {
+ case REGBYTE:
+ off += scnprintf(strbuf + off, size - off,
+ " %02hhX", data);
+ break;
+ case REGWORD:
+ off += scnprintf(strbuf + off, size - off,
+ " %02hhX %02hhX", (data >> 8), data);
+ break;
+ case REGDWORD:
+ default:
+ off += scnprintf(strbuf + off, size - off,
+ "%02hhX %02hhX %02hhX %02hhX",
+ (data >> 24), (data >> 16), (data >> 8), data);
+ break;
+ }
+
+
+ /* Then description if going to be the last */
+ off += scnprintf(strbuf + off, size - off,
+ " - %s\n", regdesc);
+ }
+
+ /* Copy the buffer to the User Space */
+ ret = simple_read_from_buffer(ubuf, count, offp, strbuf, off);
+ kfree(strbuf);
+
+ return ret;
+}
+
+/*
+ * DebugFS read NT-function registers node callback
+ */
+static ssize_t idt_ntb_dbgfs_ntregs_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ ssize_t size;
+
+ /* Read the values of the NT-related registers */
+ size = idt_ntb_dbgfs_regs_read(filp, ubuf, count, offp,
+ 0, IDT_NTB_CFGREGS_SPLIT, "NT-function registers raw values");
+
+ return size;
+}
+
+/*
+ * DebugFS read IDT PCIe-switch registers node info callback
+ */
+static ssize_t idt_ntb_dbgfs_swregs_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ ssize_t size;
+
+ /* Read the values of the IDT PCIe-swtich global registers */
+ size = idt_ntb_dbgfs_regs_read(filp, ubuf, count, offp,
+ IDT_NTB_CFGREGS_SPLIT + 1, IDT_NTB_CFGREGS_END,
+ "IDT PCIe-switch global registers raw values");
+
+ return size;
+}
+
+/*
+ * Driver DebugFS initialization function
+ */
+static int idt_ntb_init_dbgfs(struct idt_ntb_data *pdata)
+{
+ const char *devname;
+ struct dentry *dbgfs_info, *dbgfs_ntregs, *dbgfs_swregs;
+ int ret = 0;
+
+ /* If the top directory is not created then do nothing */
+ if (IS_ERR_OR_NULL(dbgfs_topdir)) {
+ dev_info_data(pdata,
+ "Top DebugFS directory has not been created for "
+ NTB_NAME);
+ return PTR_ERR(dbgfs_topdir);
+ }
+
+ /* Retrieve the device name */
+ devname = dev_name(to_dev_data(pdata));
+
+ /* Create the top directory of the device */
+ pdata->dbgfs_dir = debugfs_create_dir(devname, dbgfs_topdir);
+ if (IS_ERR(pdata->dbgfs_dir)) {
+ dev_dbg_data(pdata, "Could not create the DebugFS dir %s for %s",
+ devname, NTB_NAME);
+ return PTR_ERR(pdata->dbgfs_dir);
+ }
+
+ /* Create the info file node */
+ dbgfs_info = debugfs_create_file("info", S_IRUSR,
+ pdata->dbgfs_dir, pdata, &idt_ntb_dbgfs_info_ops);
+ if (IS_ERR(dbgfs_info)) {
+ dev_dbg_data(pdata, "Could not create the DebugFS info node");
+ ret = PTR_ERR(dbgfs_info);
+ goto err_rm_dir;
+ }
+
+ /* Create the NT-registers file node */
+ dbgfs_ntregs = debugfs_create_file("ntregs", S_IRUSR,
+ pdata->dbgfs_dir, pdata, &idt_ntb_dbgfs_ntregs_ops);
+ if (IS_ERR(dbgfs_ntregs)) {
+ dev_dbg_data(pdata,
+ "Could not create the DebugFS NT-registers node");
+ ret = PTR_ERR(dbgfs_ntregs);
+ goto err_rm_dir;
+ }
+
+ /* Create the NT-registers file node */
+ dbgfs_swregs = debugfs_create_file("swregs", S_IRUSR,
+ pdata->dbgfs_dir, pdata, &idt_ntb_dbgfs_swregs_ops);
+ if (IS_ERR(dbgfs_swregs)) {
+ dev_dbg_data(pdata,
+ "Could not create the DebugFS global registers node");
+ ret = PTR_ERR(dbgfs_swregs);
+ goto err_rm_dir;
+ }
+
+ dev_dbg_data(pdata, "IDT NTB device DebugFS nodes created");
+
+ return SUCCESS;
+
+ /* Following call will remove all the subfiles in the directory */
+err_rm_dir:
+ debugfs_remove_recursive(pdata->dbgfs_dir);
+
+ return ret;
+}
+
+/*
+ * Driver DebugFS deinitialization function
+ */
+static void idt_ntb_deinit_dbgfs(struct idt_ntb_data *pdata)
+{
+ debugfs_remove_recursive(pdata->dbgfs_dir);
+
+ dev_dbg_data(pdata, "IDT NTB device DebugFS nodes discarded");
+}
+
+/*===========================================================================
+ * 12. PCI bus callback functions
+ *===========================================================================*/
+
+/*
+ * PCI device probe() callback function
+ */
+static int idt_ntb_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct idt_ntb_data *pdata;
+ int ret;
+
+ /* Check whether the kernel has properly fixed the IDT NTB
+ * function up */
+ ret = idt_ntb_check_quirks(pdev);
+ if (SUCCESS != ret) {
+ return ret;
+ }
+
+ /* Allocate the memory for the IDT PCIe-swtich NTB driver data */
+ pdata = idt_ntb_create_data(pdev, id);
+ if (IS_ERR_OR_NULL(pdata)) {
+ return PTR_ERR(pdata);
+ }
+
+ /* Initialize the basic PCI subsystem of the device */
+ ret = idt_ntb_init_pci(pdata);
+ if (SUCCESS != ret) {
+ goto err_free_data;
+ }
+
+ /* Determine the ports NT-functions predefined topology */
+ ret = idt_ntb_scantopo(pdata);
+ if (SUCCESS != ret) {
+ goto err_deinit_pci;
+ }
+
+ /* Add all the peers */
+ ret = idt_ntb_addpeers(pdata);
+ if (SUCCESS != ret) {
+ goto err_deinit_pci;
+ }
+
+ /* Initialize the doorbells */
+ idt_ntb_init_db(pdata);
+
+ /* Allocate the Memory Window resources */
+ ret = idt_ntb_init_mws(pdata);
+ if (SUCCESS != ret) {
+ goto err_freedb;
+ }
+
+ /* Init messaging subsystem */
+ ret = idt_ntb_init_msg(pdata);
+ if (SUCCESS != ret) {
+ goto err_clean_mws;
+ }
+
+ /* Start the link polling subsystem */
+ idt_ntb_init_link(pdata);
+
+ /* Initialize the PCIe interrupts */
+ ret = idt_ntb_init_isr(pdata);
+ if (SUCCESS != ret) {
+ goto err_clear_link;
+ }
+
+ /* Register all the devices on the NTB bus */
+ ret = idt_ntb_register_devs(pdata);
+ if (SUCCESS != ret) {
+ goto err_clear_isr;
+ }
+
+ /* Initialize the DebugFS node of the IDT PCIe-switch NTB driver.
+ * Don't pay much attention to this even if it failed */
+ (void)idt_ntb_init_dbgfs(pdata);
+
+ /* IDT PCIe-switch NTB driver is finally initialized */
+ dev_info_data(pdata, "IDT PCIe-swtich NTB devices are ready");
+
+ /* May the force be with us... */
+ return SUCCESS;
+
+err_clear_isr:
+ idt_ntb_clear_isr(pdata);
+err_clear_link:
+ idt_ntb_clear_link(pdata);
+/*err_deinit_msg:*/
+ idt_ntb_deinit_msg(pdata);
+err_clean_mws:
+ idt_ntb_clean_mws(pdata);
+err_freedb:
+ idt_ntb_clean_db(pdata);
+/*err_delpeers:*/
+ idt_ntb_delpeers(pdata);
+err_deinit_pci:
+ idt_ntb_deinit_pci(pdata);
+err_free_data:
+ idt_ntb_free_data(pdata);
+
+ return ret;
+}
+
+/*
+ * PCI device remove() callback function
+ */
+static void idt_ntb_pci_remove(struct pci_dev *pdev)
+{
+ struct idt_ntb_data *pdata = pci_get_drvdata(pdev);
+
+ /* Deinit the DebugFS node */
+ idt_ntb_deinit_dbgfs(pdata);
+
+ /* Unregister the devices from the NTB bus */
+ idt_ntb_unregister_devs(pdata);
+
+ /* Stop the interrupt handler */
+ idt_ntb_clear_isr(pdata);
+
+ /* Stop the link polling subsystem */
+ idt_ntb_clear_link(pdata);
+
+ /* Deinitialize the messaging subsystem */
+ idt_ntb_deinit_msg(pdata);
+
+ /* Clear the memory windows */
+ idt_ntb_clean_mws(pdata);
+
+ /* Free the allocated Doorbells */
+ idt_ntb_clean_db(pdata);
+
+ /* Delete the added peer devices */
+ idt_ntb_delpeers(pdata);
+
+ /* Deinit the basic PCI subsystem */
+ idt_ntb_deinit_pci(pdata);
+
+ /* Free the memory occupied by the data */
+ idt_ntb_free_data(pdata);
+
+ /* IDT PCIe-switch NTB driver is finally initialized */
+ dev_info(&pdev->dev, "IDT PCIe-swtich NTB devices are unloaded");
+
+ /* Sayonara... */
+}
+
+/*
+ * IDT PCIe-switch models ports configuration structures
+ */
+static struct idt_89hpes_pdata idt_89hpes24nt6ag2_config = {
+ .port_cnt = 6, .ports = {0, 2, 4, 6, 8, 12}
+};
+static struct idt_89hpes_pdata idt_89hpes32nt8ag2_config = {
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+static struct idt_89hpes_pdata idt_89hpes32nt8bg2_config = {
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+static struct idt_89hpes_pdata idt_89hpes12nt12g2_config = {
+ .port_cnt = 3, .ports = {0, 8, 16}
+};
+static struct idt_89hpes_pdata idt_89hpes16nt16g2_config = {
+ .port_cnt = 4, .ports = {0, 8, 12, 16}
+};
+static struct idt_89hpes_pdata idt_89hpes24nt24g2_config = {
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+static struct idt_89hpes_pdata idt_89hpes32nt24ag2_config = {
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+static struct idt_89hpes_pdata idt_89hpes32nt24bg2_config = {
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+
+/*
+ * PCI-ids table of the supported IDT PCIe-switch devices
+ */
+static const struct pci_device_id idt_ntb_pci_tbl[] = {
+ {IDT_PCI_DEVICE_IDS(89HPES24NT6AG2, idt_89hpes24nt6ag2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES32NT8AG2, idt_89hpes32nt8ag2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES32NT8BG2, idt_89hpes32nt8bg2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES12NT12G2, idt_89hpes12nt12g2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES16NT16G2, idt_89hpes16nt16g2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES24NT24G2, idt_89hpes24nt24g2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES32NT24AG2, idt_89hpes32nt24ag2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES32NT24BG2, idt_89hpes32nt24bg2_config)},
+ {0}
+};
+MODULE_DEVICE_TABLE(pci, idt_ntb_pci_tbl);
+
+/*
+ * IDT PCIe-switch NT-function device driver structure definition
+ */
+static struct pci_driver idt_ntb_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .probe = idt_ntb_pci_probe,
+ .remove = idt_ntb_pci_remove,
+ .id_table = idt_ntb_pci_tbl,
+};
+
+static int __init idt_ntb_pci_driver_init(void)
+{
+ pr_info("%s %s\n", NTB_DESC, NTB_VER);
+
+ /* Create the top DebugFS directory if the FS is initialized */
+ if (debugfs_initialized())
+ dbgfs_topdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
+
+ /* Register the NTB hardware driver to handle the PCI device */
+ return pci_register_driver(&idt_ntb_pci_driver);
+}
+module_init(idt_ntb_pci_driver_init);
+
+static void __exit idt_ntb_pci_driver_exit(void)
+{
+ /* Unregister the NTB hardware driver */
+ pci_unregister_driver(&idt_ntb_pci_driver);
+
+ /* Discard the top DebugFS directory */
+ debugfs_remove_recursive(dbgfs_topdir);
+}
+module_exit(idt_ntb_pci_driver_exit);
+
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.h b/drivers/ntb/hw/idt/ntb_hw_idt.h
new file mode 100644
index 0000000..ffe3327
--- /dev/null
+++ b/drivers/ntb/hw/idt/ntb_hw_idt.h
@@ -0,0 +1,390 @@
+/*
+ * This file is provided under a GPLv2 license. When using or
+ * redistributing this file, you may do so under that license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (C) 2016 T-Platforms All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, one can be found <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * IDT PCIe-switch NTB Linux driver
+ *
+ * Contact Information:
+ * Serge Semin <fancer.lancer@...il.com>, <Sergey.Semin@...latforms.ru>
+ */
+
+#ifndef NTB_HW_IDT_H
+#define NTB_HW_IDT_H
+
+#include <linux/types.h>
+#include <linux/ntb.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+#include "ntb_hw_idt_regmap.h"
+
+/*
+ * Macro is used to create the struct pci_device_id that matches
+ * the supported IDT PCIe-switches
+ * @devname: Capitalized name of the particular device
+ * @data: Variable passed to the driver of the particular device
+ */
+#define IDT_PCI_DEVICE_IDS(devname, data) \
+ .vendor = PCI_VENDOR_ID_IDT, .device = PCI_DEVICE_ID_IDT_##devname, \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, \
+ .class = (PCI_CLASS_BRIDGE_OTHER << 8), .class_mask = (0xFFFF00), \
+ .driver_data = (kernel_ulong_t)&data
+
+/*
+ * IDT PCIe-switches device IDs
+ */
+#define PCI_DEVICE_ID_IDT_89HPES24NT6AG2 0x8091
+#define PCI_DEVICE_ID_IDT_89HPES32NT8AG2 0x808F
+#define PCI_DEVICE_ID_IDT_89HPES32NT8BG2 0x8088
+#define PCI_DEVICE_ID_IDT_89HPES12NT12G2 0x8092
+#define PCI_DEVICE_ID_IDT_89HPES16NT16G2 0x8090
+#define PCI_DEVICE_ID_IDT_89HPES24NT24G2 0x808E
+#define PCI_DEVICE_ID_IDT_89HPES32NT24AG2 0x808C
+#define PCI_DEVICE_ID_IDT_89HPES32NT24BG2 0x808A
+
+/*
+ * Some common constant used in the driver for better readability:
+ * @ON: Enable something
+ * @OFF: Disable something
+ * @SUCCESS: Success of a function execution
+ * @BAR0: Operation with BAR0
+ * @BAR2: Operation with BAR2
+ * @BAR4: Operation with BAR4
+ */
+#define ON ((u32)0x1)
+#define OFF ((u32)0x0)
+#define SUCCESS 0
+#define BAR0 0
+#define BAR2 2
+#define BAR4 4
+
+/*
+ * Inline helper function to perform the for each set bit looping.
+ *
+ * NOTE We don't use the standard for_each_set_bit because it's unsigned
+ * long aligned, but our registers are u32 sized.
+ */
+static __always_inline int next_bit(u32 var, int bit)
+{
+ int pos;
+
+ pos = ffs(var & ~(((u32)1 << bit) - 1));
+ return (0 == pos || 32 <= bit) ? 32 : (pos - 1);
+}
+
+/*
+ * Perform loop for each set bit of a u32 variable.
+ *
+ * NOTE Size of integer is supposed to be 32-bits or greater so this
+ * "for each"-macro would work.
+ */
+#define for_each_set_bit_u32(var, bit) \
+ for ((bit) = next_bit(var, 0); \
+ bit < 32; \
+ (bit) = next_bit(var, (bit) + 1))
+
+/*
+ * Create a contiguous bitmask starting at bit position @l and ending at
+ * position @h. For example
+ * GENMASK_ULL(39, 21) gives us the 64bit vector 0x000000ffffe00000.
+ */
+#ifndef GENMASK
+#define GENMASK(h, l) \
+ (((~0UL) << (l)) & (~0UL >> (BITS_PER_LONG - 1 - (h))))
+#endif /* !GENMASK */
+
+/*
+ * Number of NTB resource like Doorbell bits, Memory windows
+ * and Message registers
+ */
+#define IDT_NTB_DBELL_CNT 32
+#define IDT_NTB_MW_CNT 24
+#define IDT_NTB_MSG_CNT 4
+#define IDT_NTB_MTBL_ENTRY_CNT 64
+
+/*
+ * General IDT PCIe-switch constant
+ * @IDT_NTB_MAXPORTS_CNT: Maximum number of ports per IDT PCIe-switch
+ * @IDT_NTB_MAXPARTS_CNT: Maximum number of partitions per IDT PCIe-switch
+ * @IDT_PCIE_REGSIZE: Size of the registers in bytes
+ * @IDT_NTB_TRANSALIGN: Alignment of the translated base address
+ * @IDT_NTB_LNKPOLL_TOUT: Timeout of the link polling kernel thread
+ * @IDT_NTB_SENDMSG_TOUT: Timeout of sending the next message to a peer
+ * @IDT_NTB_TEMP_LTH: Lower threshold of the IDT temperature sensor
+ * @IDT_NTB_TEMP_HTH: Higher threshold of the IDT temperature sensor
+ */
+#define IDT_NTB_MAXPORTS_CNT 24
+#define IDT_NTB_MAXPARTS_CNT 8
+#define IDT_PCIE_REGSIZE 4
+#define IDT_NTB_TRANSALIGN 4
+#define IDT_NTB_LNKPOLL_TOUT msecs_to_jiffies(1000)
+#define IDT_NTB_SENDMSG_TOUT msecs_to_jiffies(100)
+#define IDT_NTB_SENDMSG_RETRY 50
+#define IDT_NTB_TEMP_LTH (u32)10
+#define IDT_NTB_TEMP_HTH (u32)85
+
+/*
+ * u32 data atomic structure
+ */
+typedef struct {
+ spinlock_t lock;
+ u32 data;
+} atomic_u32_t;
+
+/*
+ * Queue head with atomic access
+ */
+typedef struct {
+ struct list_head head;
+ spinlock_t lock;
+} queue_atomic_t;
+
+/*
+ * Messages list container
+ * @msg: Message structure
+ * @retry: Number of retries left
+ * @entry: Queue entry
+ */
+struct idt_ntb_msg {
+ struct ntb_msg msg;
+ int retry;
+ struct list_head entry;
+};
+#define to_msg_list_entry(pentry) \
+ (list_entry(pentry, struct idt_ntb_msg, entry))
+
+/*
+ * IDT PCIe-switch model private data
+ * @port_cnt: Total number of NT endpoint ports
+ * @ports: Port ids
+ */
+struct idt_89hpes_pdata {
+ unsigned char port_cnt;
+ unsigned char ports[];
+};
+
+/*
+ * NTB-bus device structure
+ * @ntb: NTB-bus device related structure
+ *
+ * @port: Remote NT-function port
+ * @part: Remote NT-function partition
+ *
+ * @pairid: Global Identifier of Primary-Secondary ports pair
+ *
+ * @lnk_sts: Peer side link status
+ *
+ * @mw_self_cnt: Number of memory windows locally available
+ * @mw_self_offset: Offset of the first memory window in the Lookup table
+ * @mw_peer_cnt: Number of peer memory windows
+ *
+ * @db_cnt: Number of Doorbells for communications with the
+ * peer NT-function
+ * @db_self_offset: Bits offset of the self Doorbells
+ * @db_peer_offset: Bits offset of the peer Doorbells
+ * @db_valid_mask: Doorbell valid mask
+ * @db_self_mask: Mask of the shifted by self_offset doorbells
+ * @db_peer_mask: Mask of the shifted by peer_offset doorbells
+ *
+ * @qinmsg: Queue of inbound messages received from the peer
+ * @inmsg_work: Work thread rising event of new message arrival
+ * @qoutmsg: Queue of outbound messages posted to send to the peer
+ * @outmsg_work: Work thread sending messages
+ */
+struct idt_ntb_dev {
+ struct ntb_dev ntb;
+
+ unsigned char port;
+ unsigned char part;
+
+ unsigned char pairid;
+
+ u32 lnk_sts;
+
+ unsigned char mw_self_cnt;
+ unsigned char mw_self_offset;
+ unsigned char mw_peer_cnt;
+
+ unsigned char db_cnt;
+ unsigned char db_self_offset;
+ unsigned char db_peer_offset;
+ u32 db_valid_mask;
+ u32 db_self_mask;
+ u32 db_peer_mask;
+
+ queue_atomic_t qinmsg;
+ struct work_struct inmsg_work;
+ queue_atomic_t qoutmsg;
+ struct delayed_work outmsg_work;
+};
+#define to_ndev_ntb(pntb) container_of(pntb, struct idt_ntb_dev, ntb)
+#define to_pdev_ndev(ndev) ((ndev)->ntb.pdev)
+#define to_dev_ndev(ndev) (&ndev->ntb.dev)
+#define to_data_ndev(ndev) \
+ ((struct idt_ntb_data *)(pci_get_drvdata(to_pdev_ndev(ndev))))
+#define to_cfg_ndev(ndev) (to_data_ndev(ndev)->cfg_mmio)
+#define to_ndev_inmsg_work(work) \
+ container_of(work, struct idt_ntb_dev, inmsg_work)
+#define to_ndev_outmsg_work(work) \
+ container_of(to_delayed_work(work), struct idt_ntb_dev, outmsg_work)
+
+/*
+ * IDT PCIe-switch NTB bus topology structure
+ * @paircnt: Total number of the NTB pair in the current topology
+ * (it's just the number of Secondary ports)
+ *
+ * @priports: Bitset of Primary ports
+ * @secports: Array of Secondary ports bitsets related to the corresponding
+ * Primary ports
+ */
+struct idt_ntb_topo {
+ unsigned char paircnt;
+
+ u32 priports;
+ u32 secports[IDT_NTB_MAXPORTS_CNT];
+};
+
+/*
+ * Structure related to the local IDT PCIe-switch NT-function
+ * @pdev: Pointer to the PCI-bus device
+ * @swcfg: Pointer to the struct idt_89hpes_pdata related to the current
+ * IDT PCIe-switch
+ *
+ * @port: Local NT-function port
+ * @part: Local NT-function partition
+ *
+ * @topo: Topology of the NT-function ports
+ * @role: Local port role in the IDT topology
+ *
+ * @peer_cnt: Number of possible remote peers
+ * @ndevs: Array of the device-related structures
+ *
+ * @cfg_mmio: Virtual address of the memory mapped configuration space
+ * of the NT-function
+ *
+ * @idt_wq: IDT driver workqueue to setup the link poll and messages
+ * delivery operations
+ *
+ * @lnk_work: Link status polling kernel thread
+ *
+ * @mw_base: Physical address of the memory mapped base address of the
+ * Memory Windows
+ * @mw_size: Size of one Memory Window
+ * @lut_lock: Lookup table access spin lock
+ *
+ * @db_sts: Doorbell status atomic variable
+ * @db_msk: Doorbell mask atomic variable
+ * @db_lock: Doorbell status and mask spin lock
+ * @db_tasklet: Tasklet to handle the doorbell events
+ *
+ * @msg_lock: Messages routing table lock
+ * @msg_cache: Slab cache of the message structures
+ * @msg_tasklet: Tasklet - handler of the incoming messages
+ *
+ * @dbgfs_dir: DebugFS directory to place the driver debug file
+ */
+struct idt_ntb_data {
+ struct pci_dev *pdev;
+ struct idt_89hpes_pdata *swcfg;
+
+ unsigned char port;
+ unsigned char part;
+
+ struct idt_ntb_topo topo;
+ enum ntb_topo role;
+
+ unsigned char peer_cnt;
+ struct idt_ntb_dev *ndevs;
+
+ void __iomem *cfg_mmio;
+
+ struct workqueue_struct *idt_wq;
+
+ struct delayed_work lnk_work;
+
+ phys_addr_t mw_base;
+ resource_size_t mw_size;
+ spinlock_t lut_lock;
+
+ u32 db_sts;
+ u32 db_msk;
+ spinlock_t db_lock;
+ struct tasklet_struct db_tasklet;
+
+ spinlock_t msg_lock;
+ struct kmem_cache *msg_cache;
+ struct tasklet_struct msg_tasklet;
+
+ struct dentry *dbgfs_dir;
+};
+#define to_dev_data(data) (&(data->pdev->dev))
+#define to_data_lnkwork(work) \
+ container_of(to_delayed_work(work), struct idt_ntb_data, lnk_work)
+
+/*
+ * Descriptor of the IDT PCIe-switch port specific parameters in the
+ * Global Configuration Space
+ * @pcicmd: PCI command register
+ * @pcielsts: PCIe link status
+ * @ntsdata: NT signal data
+ * @ntgsignal: NT global signal
+ *
+ * @ctl: Port control register
+ * @sts: Port status register
+ */
+struct idt_ntb_port {
+ enum idt_ntb_cfgreg pcicmd;
+ enum idt_ntb_cfgreg pcielsts;
+ enum idt_ntb_cfgreg ntsdata;
+ enum idt_ntb_cfgreg ntgsignal;
+
+ enum idt_ntb_cfgreg ctl;
+ enum idt_ntb_cfgreg sts;
+};
+
+/*
+ * Descriptor of the IDT PCIe-switch partition specific parameters.
+ * @ctl: Partition control register in the Global Address Space
+ * @sts: Partition status register in the Global Address Space
+ */
+struct idt_ntb_part {
+ enum idt_ntb_cfgreg ctl;
+ enum idt_ntb_cfgreg sts;
+ enum idt_ntb_cfgreg msgctl[IDT_NTB_MSG_CNT];
+};
+
+#endif /* NTB_HW_IDT_H */
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt_quirks.c b/drivers/ntb/hw/idt/ntb_hw_idt_quirks.c
new file mode 100644
index 0000000..57c7ccf
--- /dev/null
+++ b/drivers/ntb/hw/idt/ntb_hw_idt_quirks.c
@@ -0,0 +1,163 @@
+/*
+ * This file is provided under a GPLv2 license. When using or
+ * redistributing this file, you may do so under that license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (C) 2016 T-Platforms All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, one can be found <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * IDT PCIe-switch NTB Linux driver
+ *
+ * Contact Information:
+ * Serge Semin <fancer.lancer@...il.com>, <Sergey.Semin@...latforms.ru>
+ */
+
+/*#define DEBUG*/
+
+#include <linux/kernel.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+
+#include "ntb_hw_idt.h"
+#include "ntb_hw_idt_quirks.h"
+
+/*
+ * Module parameters:
+ * @mw_aprt: Memory Windows aperture (x86: 9 - 26, x64: 9 - 32)
+ */
+static unsigned char mw_aprt = DEFAULT_MW_APRT;
+module_param(mw_aprt, byte, 0000);
+MODULE_PARM_DESC(mw_aprt,
+ "IDT NTB memory windows aperture. The actual memory windows size is "
+ "limited with 2^mw_aprt. It is initially set to 20 so the upper "
+ "boundary of the memory windows size would be 1 MB."
+ "Both sides, local node and peer MUST set the same value!");
+
+/*
+ * Alter the passed driver paremeters
+ */
+static void idt_ntb_alter_params(struct pci_dev *pdev)
+{
+ unsigned char mw_aprt_bak = mw_aprt;
+
+ /* Clamp the memory windows aperture parameter */
+#ifdef CONFIG_64BIT
+ mw_aprt = clamp(mw_aprt, MIN_MW_APRT, MAX_X64_MW_APRT);
+#else
+ mw_aprt = clamp(mw_aprt, MIN_MW_APRT, MAX_X86_MW_APRT);
+#endif /* !CONFIG_64BIT */
+ if (mw_aprt_bak != mw_aprt) {
+ dev_warn(&pdev->dev,
+ "IDT NTB memory windows aperture has been clamped "
+ "from %hhu to %hhu", mw_aprt_bak, mw_aprt);
+ }
+
+ dev_dbg(&pdev->dev, "IDT NTB HW-driver parameter has been verified");
+}
+
+/*
+ * IDT PCIe-swtich NTB function BARs pre-initializer
+ */
+static void idt_ntb_quirks(struct pci_dev *pdev)
+{
+ int ret;
+ u32 lubar_aprt = 0, dirbar_aprt = 0;
+
+ /* Alter the memory windows aperture parameter first */
+ idt_ntb_alter_params(pdev);
+
+ /* Calculate memory windows related BAR aperture */
+ lubar_aprt = (mw_aprt + MWLUTBL_APRT) << MWAPRT_OFF;
+ dirbar_aprt = mw_aprt << MWAPRT_OFF;
+
+ /* Pre-initialize the maximum possible BAR's so don't worry about them
+ * anymore */
+ /* BAR0 - Memory mapped Configuration space - x32 Non-prefetchable
+ * memory mapped space. Since it is the registers space then it must be
+ * non-prefetchable, which permits the 32-bits address only according
+ * to the PCI specs. Even though PCIe bridges doesn't do any prefetching
+ * whether prefetch bit is set or not, We'll set the bit as a matter of
+ * legacy */
+ ret = pci_write_config_dword(pdev, BARSETUP0_OFF, BARSETUP_CFG_32BIT);
+ if (SUCCESS != ret) {
+ dev_err(&pdev->dev,
+ "Failed to activate registers configuration space (BAR0)");
+ return;
+ }
+
+ /* BAR2(+ x64:3) - Memory mapped shared memory with address translation
+ * based on lookup table - x32/x64 Non-prefetchable/prefetchable memory
+ * mapped space with aperture of 2^(mw_aprt + MWLUTBL_APRT), which
+ * effectively gives 2^mw_aprt bytes of memory space per each memory
+ * window */
+#ifdef CONFIG_64BIT
+ ret = pci_write_config_dword(pdev, BARSETUP2_OFF,
+ BARSETUP_24LUMW_64BIT | lubar_aprt);
+
+#else
+ ret = pci_write_config_dword(pdev, BARSETUP2_OFF,
+ BARSETUP_24LUMW_32BIT | lubar_aprt);
+
+#endif /* !CONFIG_64BIT */
+ if (SUCCESS != ret) {
+ dev_err(&pdev->dev,
+ "Failed to activate lookup table based memory window (BAR2)");
+ return;
+ }
+
+ /* BAR4(+ x64:5) - Memory mapped shared memory with direct address
+ * translation - x32/x64 Non-prefetchable/prefetchable memory
+ * mapped space with aperture of 2^(mw_aprt + MWLUTBL_APRT) */
+#ifdef CONFIG_64BIT
+ ret = pci_write_config_dword(pdev, BARSETUP4_OFF,
+ BARSETUP_DIRMW_64BIT | dirbar_aprt);
+
+#else
+ ret = pci_write_config_dword(pdev, BARSETUP4_OFF,
+ BARSETUP_DIRMW_32BIT | dirbar_aprt);
+
+#endif /* !CONFIG_64BIT */
+ if (SUCCESS != ret) {
+ dev_err(&pdev->dev,
+ "Failed to activate directly mapped memory window (BAR4)");
+ return;
+ }
+
+ dev_dbg(&pdev->dev, "IDT NTB BAR's enabled");
+}
+IDT_NTB_PCI_FIXUP_EARLY(89HPES24NT6AG2, idt_ntb_quirks);
+IDT_NTB_PCI_FIXUP_EARLY(89HPES32NT8AG2, idt_ntb_quirks);
+IDT_NTB_PCI_FIXUP_EARLY(89HPES32NT8BG2, idt_ntb_quirks);
+IDT_NTB_PCI_FIXUP_EARLY(89HPES12NT12G2, idt_ntb_quirks);
+IDT_NTB_PCI_FIXUP_EARLY(89HPES16NT16G2, idt_ntb_quirks);
+IDT_NTB_PCI_FIXUP_EARLY(89HPES24NT24G2, idt_ntb_quirks);
+IDT_NTB_PCI_FIXUP_EARLY(89HPES32NT24AG2, idt_ntb_quirks);
+IDT_NTB_PCI_FIXUP_EARLY(89HPES32NT24BG2, idt_ntb_quirks);
+
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt_quirks.h b/drivers/ntb/hw/idt/ntb_hw_idt_quirks.h
new file mode 100644
index 0000000..e633b7c
--- /dev/null
+++ b/drivers/ntb/hw/idt/ntb_hw_idt_quirks.h
@@ -0,0 +1,114 @@
+/*
+ * This file is provided under a GPLv2 license. When using or
+ * redistributing this file, you may do so under that license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (C) 2016 T-Platforms All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, one can be found <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * IDT PCIe-switch NTB Linux driver
+ *
+ * Contact Information:
+ * Serge Semin <fancer.lancer@...il.com>, <Sergey.Semin@...latforms.ru>
+ */
+
+#ifndef NTB_HW_IDT_QUIRKS_H
+#define NTB_HW_IDT_QUIRKS_H
+
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include "ntb_hw_idt.h"
+
+/*
+ * Macro is used to create the struct pci_fixup that matches the supported
+ * IDT PCIe-switches
+ * @devname: Capitalized name of the particular device
+ * @hook: Fixup hook function name
+ */
+#define IDT_NTB_PCI_FIXUP_EARLY(devname, hook) \
+ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_IDT, \
+ PCI_DEVICE_ID_IDT_##devname, PCI_CLASS_BRIDGE_OTHER, 8U, hook)
+
+/*
+ * IDT PCIe-switch NTB function BAR setup parameters:
+ * @BARSETUP{N}_OFF: BAR{N} setup register offset
+ * @BARSETUP_CFG_32BIT: 32-bits addressable non-prefetchable memory
+ * mapped registers configuration space
+ * @BARSETUP_CFG_64BIT: 64-bits addressable prefetchable memory
+ * mapped registers configuration space
+ * @BARSETUP_DIRMW_32BIT: 32-bits addresable non-prefetchable direct
+ * address translatable memory window
+ * @BARSETUP_DIRMW_64BIT: 64-bits addresable prefetchable direct
+ * address translatable memory window
+ * @BARSETUP_12LUMW_32BIT: 32-bits addresable non-prefetchable 12-entries
+ * lookup table memory window
+ * @BARSETUP_12LUMW_64BIT: 64-bits addresable prefetchable 12-entries
+ * lookup table memory window
+ * @BARSETUP_24LUMW_32BIT: 32-bits addresable non-prefetchable 24-entries
+ * lookup table memory window
+ * @BARSETUP_24LUMW_64BIT: 64-bits addresable prefetchable 24-entries
+ * lookup table memory window
+ *
+ */
+#define BARSETUP0_OFF 0x00470
+#define BARSETUP1_OFF 0x00480
+#define BARSETUP2_OFF 0x00490
+#define BARSETUP3_OFF 0x004A0
+#define BARSETUP4_OFF 0x004B0
+#define BARSETUP5_OFF 0x004C0
+#define BARSETUP_CFG_32BIT ((u32)0x800004C0U)
+#define BARSETUP_CFG_64BIT ((u32)0x800004CCU)
+#define BARSETUP_DIRMW_32BIT ((u32)0x80000000U)
+#define BARSETUP_DIRMW_64BIT ((u32)0x8000000CU)
+#define BARSETUP_12LUMW_32BIT ((u32)0x80000800U)
+#define BARSETUP_12LUMW_64BIT ((u32)0x8000080CU)
+#define BARSETUP_24LUMW_32BIT ((u32)0x80001000U)
+#define BARSETUP_24LUMW_64BIT ((u32)0x8000100CU)
+#define MWAPRT_OFF 4
+
+/*
+ * IDT PCIe-switch NTB function related parameters:
+ * @DEFAULT_MW_APRT: Default aperture of the memory windows (that is
+ * maximum size of the memory windows)
+ * @MIN_MW_APRT: Minimum possible aperture of the memory windows
+ * @MAX_X86_MW_APRT: Maximum aperture for x86 architecture
+ * @MAX_X64_MW_APRT: Maximum aperture for x64 architecture
+ * @MWLUTBL_APRT: Additional value to translate the per memory
+ * windows specific aperture to the aperture of
+ * the whole lookup table
+ */
+#define DEFAULT_MW_APRT (unsigned char)20
+#define MIN_MW_APRT (unsigned char)9
+#define MAX_X86_MW_APRT (unsigned char)26
+#define MAX_X64_MW_APRT (unsigned char)32
+#define MWLUTBL_APRT (unsigned char)5
+
+#endif /* NTB_HW_IDT_QUIRKS_H */
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt_regmap.h b/drivers/ntb/hw/idt/ntb_hw_idt_regmap.h
new file mode 100644
index 0000000..fa9aaf2
--- /dev/null
+++ b/drivers/ntb/hw/idt/ntb_hw_idt_regmap.h
@@ -0,0 +1,877 @@
+/*
+ * This file is provided under a GPLv2 license. When using or
+ * redistributing this file, you may do so under that license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (C) 2016 T-Platforms All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, one can be found <http://www.gnu.org/licenses/>.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * IDT PCIe-switch NTB Linux driver
+ *
+ * Contact Information:
+ * Serge Semin <fancer.lancer@...il.com>, <Sergey.Semin@...latforms.ru>
+ */
+
+#ifndef NTB_HW_IDT_REGMAP_H
+#define NTB_HW_IDT_REGMAP_H
+
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+
+/*
+ * Helper macros to enumerate the the registers and fields tables
+ * identifications.
+ * It's used in conjunction with the IDT_NT_REGFLDS(), IDT_SW_REGFLDS(),
+ * IDT_NT_CFGREGS() and IDT_SW_CFGREGS() macroses
+ */
+#define PAIR_ID_ENUM(ID, reg, mask, offset) ID,
+
+/*
+ * Helper macros to pair the Field identification with the corresponding
+ * register, mask and the offset
+ * It's used in conjunction with the IDT_NT_REGFLDS() and
+ * IDT_SW_REGFLDS() macroses
+ */
+#define PAIR_FLDID_ACCESS(ID, reg, mask, offset, retreg, retmask, retoffset) \
+ case ID: \
+ retreg = reg; \
+ retmask = mask; \
+ retoffset = offset; \
+ break;
+
+/*
+ * Helper macros to pair the registers identifications with the corresponding
+ * offset and the size
+ * It's used in conjunction with the IDT_NT_CFGREGS() and
+ * IDT_SW_CFGREGS() macroses
+ */
+#define PAIR_REGID_ACCESS(ID, addr, size, desc, retaddr, retsize, retdesc) \
+ case ID: \
+ retaddr = addr; \
+ retsize = size; \
+ retdesc = desc; \
+ break;
+
+/*
+ * IDT PCIe-swtich registers related constants:
+ *
+ * @BARSTP_MEMMAP: Memory mapped BAR select
+ * @BARSTP_TYPE_32: 32-bits addressable BAR select
+ * @BARSTP_TYPE_64: 64-bits addressable BAR select
+ * @BARSTP_NONPREF: Non-prefetchable memory
+ * @BARSTP_PREF: Prefetchable memory
+ * @BARSTP_MINSIZE: Minimum BAR aperture (2^SIZE) for Lookup table
+ * @BARSTP_MAXSIZE_32: Maximum BAR aperture for Lookup table and x86 CPU
+ * @BARSTP_MAXSIZE_64: Maximum BAR aperture for Lookup table and x64 CPU
+ * @BARSTP_MODE_WNDW: Memory Window mode of BAR
+ * @BARSTP_MODE_CFGSPC: Configuration space mode of BAR
+ * @BARSTP_ATRAN_DRCT: Direct address translation
+ * @BARSTP_ATRAN_LU12: 12-entries Lookup table for address translation
+ * @BARSTP_ATRAN_LU24: 24-entries Lookup table for address translation
+ *
+ * @GASAADDR_OFFSET: GASAADDR register offset in the NT-function config space
+ * @GASADATA_OFFSET: GASADATA register offset in the NT-function config space
+ *
+ * @PORTMODE_NT: Port mode - just one NT function
+ * @PORTMODE_USNT: Port mode - upstream switch port with NT function
+ * @PORTMODE_USNTDMA: Port mode - upstream switch port with NT and DMA
+ * functions
+ *
+ * @NTINT_MASK: Mask the NT interrupts (Msg, DB, SE, Temp)
+ * @NTINT_UNMASK: Unmask the NT interrupts (Msg, DB, SE, Temp)
+ * @ALLINT_MASK: Mask all the available interrupts
+ * @ALLINT_UNMASK: Unmask all the available unterrupts
+ * @MSGINT_BIT: Message interrupt serial bit
+ * @DBINT_BIT: Doorbell interrupt serial bit
+ * @SEINT_BIT: Switch events interrupt serial bit
+ * @FMCI_BIT: Failover mode change initiated
+ * @FMCC_BIT: Failover mode change completed
+ * @TEMPINT_BIT: Temperature sensor interrupt serial bit
+ *
+ * @INDB_MASK: Mask the inbound doorbells interrupt
+ * @INDB_UNMASK: Unmask the inbound doorbells interrupt
+ * @OUTMSG_MASK: Mask all the outbound message bits
+ * @INMSG_MASK: Mask all the inbound message bits
+ * @INMSG_STS: Valid inbound message status
+ * @MSG_MASK: Mask all the message interrupts
+ * @MSG_UNMASK: Unmask the first inbound message register interrupt
+ */
+#define BARSTP_MEMMAP ((u32)0x0)
+#define BARSTP_TYPE_32 ((u32)0x0)
+#define BARSTP_TYPE_64 ((u32)0x2)
+#define BARSTP_NONPREF ((u32)0x0)
+#define BARSTP_PREF ((u32)0x1)
+#define BARSTP_MINSIZE ((u32)14)
+#define BARSTP_MAXSIZE_32 ((u32)16)
+#define BARSTP_MAXSIZE_64 ((u32)37)
+#define BARSTP_MODE_WNDW ((u32)0x0)
+#define BARSTP_MODE_CFGSPC ((u32)0x1)
+#define BARSTP_ATRAN_DRCT ((u32)0x0)
+#define BARSTP_ATRAN_LU12 ((u32)0x1)
+#define BARSTP_ATRAN_LU24 ((u32)0x2)
+#define GASAADDR_OFFSET ((ptrdiff_t)0x00FF8)
+#define GASADATA_OFFSET ((ptrdiff_t)0x00FFC)
+#define PORTMODE_NT ((u32)0x3)
+#define PORTMODE_USNT ((u32)0x4)
+#define PORTMODE_USNTDMA ((u32)0x7)
+#define NTINT_MASK ((u32)0x8B)
+#define NTINT_UNMASK (~NTINT_MASK)
+#define ALLINT_MASK ((u32)0xBB)
+#define ALLINT_UNMASK (~ALLINT_MASK)
+#define MSGINT_BIT ((u32)0)
+#define DBINT_BIT ((u32)1)
+#define SEINT_BIT ((u32)3)
+#define FMCI_BIT ((u32)4)
+#define FMCC_BIT ((u32)5)
+#define TEMPINT_BIT ((u32)7)
+#define INDB_MASK ((u32)-1)
+#define INDB_UNMASK ((u32)0x0)
+#define OUTMSG_MASK ((u32)0xF)
+#define INMSG_MASK ((u32)0xF0000)
+#define INMSG_STS ((u32)0xF)
+#define MSG_MASK ((u32)0xF000F)
+#define MSG_UNMASK ((u32)0xE000F)
+
+/*
+ * Table of the register fields accessed over either the NT-function
+ * memory mapped registers or IDT PCIe-switch Global registers.
+ * This table is then translated into the switch-case statement
+ * so to get the proper "Name"->{reg addr, mask, fld offset}
+ * pairs.
+ */
+#define IDT_NT_REGFLDS(X, args...) \
+ /* PCI command register */ \
+ X(IDT_NT_IOAE, IDT_NT_PCI_CMD, 0x1, 0, ## args) \
+ X(IDT_NT_MAE, IDT_NT_PCI_CMD, 0x1, 1, ## args) \
+ X(IDT_NT_BME, IDT_NT_PCI_CMD, 0x1, 2, ## args) \
+ /* Link status registers */ \
+ X(IDT_NT_MAXLNKSPD, IDT_NT_PCI_PCIELCAP, 0xF, 0, ## args) \
+ X(IDT_NT_MAXLNKWDTH, IDT_NT_PCI_PCIELCAP, 0x3F, 4, ## args) \
+ X(IDT_NT_PORTNUM, IDT_NT_PCI_PCIELCAP, 0xFF, 24, ## args) \
+ X(IDT_NT_CURLNKSPD, IDT_NT_PCI_PCIELSTS, 0xF, 0, ## args) \
+ X(IDT_NT_CURLNKWDTH, IDT_NT_PCI_PCIELSTS, 0x3F, 4, ## args) \
+ X(IDT_NT_SCLK, IDT_NT_PCI_PCIELSTS, 0x1, 12, ## args) \
+ /* SSVID/SSID registers */\
+ X(IDT_NT_SSVID, IDT_NT_PCI_SSIDSSVID, 0xFFFF, 0, ## args) \
+ X(IDT_NT_SSID, IDT_NT_PCI_SSIDSSVID, 0xFFFF, 16, ## args) \
+ /* General NT-function registers */\
+ X(IDT_NT_IDPROTDIS, IDT_NT_PCI_NTCTL, 0x1, 0, ## args) \
+ X(IDT_NT_CPEN, IDT_NT_PCI_NTCTL, 0x1, 1, ## args) \
+ /* NT interrupts related registers */ \
+ X(IDT_NT_INTSTS, IDT_NT_PCI_NTINTSTS, 0xBB, 0, ## args) \
+ X(IDT_NT_MSGINT_STS, IDT_NT_PCI_NTINTSTS, 0x1, 0, ## args) \
+ X(IDT_NT_DBINT_STS, IDT_NT_PCI_NTINTSTS, 0x1, 1, ## args) \
+ X(IDT_NT_SEINT_STS, IDT_NT_PCI_NTINTSTS, 0x1, 3, ## args) \
+ X(IDT_NT_FMCIINT_STS, IDT_NT_PCI_NTINTSTS, 0x1, 4, ## args) \
+ X(IDT_NT_FMCCINT_STS, IDT_NT_PCI_NTINTSTS, 0x1, 5, ## args) \
+ X(IDT_NT_TMPINT_STS, IDT_NT_PCI_NTINTSTS, 0x1, 7, ## args) \
+ X(IDT_NT_INTMSK, IDT_NT_PCI_NTINTMSK, 0xBB, 0, ## args) \
+ X(IDT_NT_MSGINT_MSK, IDT_NT_PCI_NTINTMSK, 0x1, 0, ## args) \
+ X(IDT_NT_DBINT_MSK, IDT_NT_PCI_NTINTMSK, 0x1, 1, ## args) \
+ X(IDT_NT_SEINT_MSK, IDT_NT_PCI_NTINTMSK, 0x1, 3, ## args) \
+ X(IDT_NT_FMCIINT_MSK, IDT_NT_PCI_NTINTMSK, 0x1, 4, ## args) \
+ X(IDT_NT_FMCCINT_MSK, IDT_NT_PCI_NTINTMSK, 0x1, 5, ## args) \
+ X(IDT_NT_TMPINT_MSK, IDT_NT_PCI_NTINTMSK, 0x1, 7, ## args) \
+ X(IDT_NT_GSIGNAL, IDT_NT_PCI_NTGSIGNAL, 0x1, 0, ## args) \
+ /* Message registers status and masks */ \
+ X(IDT_NT_OUTMSGSTS, IDT_NT_PCI_MSGSTS, 0xF, 0, ## args) \
+ X(IDT_NT_INMSGSTS, IDT_NT_PCI_MSGSTS, 0xF, 16, ## args) \
+ X(IDT_NT_OUTMSG0STSMSK, IDT_NT_PCI_MSGSTSMSK, 0x1, 0, ## args) \
+ X(IDT_NT_OUTMSG1STSMSK, IDT_NT_PCI_MSGSTSMSK, 0x1, 1, ## args) \
+ X(IDT_NT_OUTMSG2STSMSK, IDT_NT_PCI_MSGSTSMSK, 0x1, 2, ## args) \
+ X(IDT_NT_OUTMSG3STSMSK, IDT_NT_PCI_MSGSTSMSK, 0x1, 3, ## args) \
+ X(IDT_NT_INMSG0STSMSK, IDT_NT_PCI_MSGSTSMSK, 0x1, 16, ## args) \
+ X(IDT_NT_INMSG1STSMSK, IDT_NT_PCI_MSGSTSMSK, 0x1, 17, ## args) \
+ X(IDT_NT_INMSG2STSMSK, IDT_NT_PCI_MSGSTSMSK, 0x1, 18, ## args) \
+ X(IDT_NT_INMSG3STSMSK, IDT_NT_PCI_MSGSTSMSK, 0x1, 19, ## args) \
+ /* BARSETUPx register (default BARSETUP0) */ \
+ X(IDT_NT_BARSTP_MEMSI, IDT_NT_PCI_BARSETUP0, 0x1, 0, ## args) \
+ X(IDT_NT_BARSTP_TYPE, IDT_NT_PCI_BARSETUP0, 0x3, 1, ## args) \
+ X(IDT_NT_BARSTP_PREF, IDT_NT_PCI_BARSETUP0, 0x1, 3, ## args) \
+ X(IDT_NT_BARSTP_SIZE, IDT_NT_PCI_BARSETUP0, 0x3F, 4, ## args) \
+ X(IDT_NT_BARSTP_MODE, IDT_NT_PCI_BARSETUP0, 0x1, 10, ## args) \
+ X(IDT_NT_BARSTP_ATRAN, IDT_NT_PCI_BARSETUP0, 0x3, 11, ## args) \
+ X(IDT_NT_BARSTP_TPART, IDT_NT_PCI_BARSETUP0, 0x7, 13, ## args) \
+ X(IDT_NT_BARSTP_EN, IDT_NT_PCI_BARSETUP0, 0x1, 31, ## args) \
+ /* NT mapping table registers */ \
+ X(IDT_NT_MTBL_ADDR, IDT_NT_PCI_NTMTBLADDR, 0x7F, 0, ## args) \
+ X(IDT_NT_MTBL_ERR, IDT_NT_PCI_NTMTBLSTS, 0x1, 0, ## args) \
+ X(IDT_NT_MTBL_VALID, IDT_NT_PCI_NTMTBLDATA, 0x1, 0, ## args) \
+ X(IDT_NT_MTBL_BDF, IDT_NT_PCI_NTMTBLDATA, 0xFFFF, 1, ## args) \
+ X(IDT_NT_MTBL_PART, IDT_NT_PCI_NTMTBLDATA, 0x7, 17, ## args) \
+ X(IDT_NT_MTBL_ATP, IDT_NT_PCI_NTMTBLDATA, 0x1, 29, ## args) \
+ X(IDT_NT_MTBL_CNS, IDT_NT_PCI_NTMTBLDATA, 0x1, 30, ## args) \
+ X(IDT_NT_MTBL_RNS, IDT_NT_PCI_NTMTBLDATA, 0x1, 31, ## args) \
+ X(IDT_NT_MTBL_REQID, IDT_NT_PCI_REQIDCAP, 0xFFFF, 0, ## args) \
+ /* Lookup table registers */ \
+ X(IDT_NT_LUT_INDEX, IDT_NT_PCI_LUTOFFSET, 0x1F, 0, ## args) \
+ X(IDT_NT_LUT_BAR, IDT_NT_PCI_LUTOFFSET, 0x7, 8, ## args) \
+ X(IDT_NT_LUT_PART, IDT_NT_PCI_LUTUDATA, 0xF, 0, ## args) \
+ X(IDT_NT_LUT_VALID, IDT_NT_PCI_LUTUDATA, 0x1, 31, ## args)
+
+/*
+ * Table of the fields accessed over the global switch registers
+ * This table is then translated into the switch-case statement
+ * so to get the proper "Name"->{reg addr, mask, fld offset}
+ * pairs.
+ */
+#define IDT_SW_REGFLDS(X, args...) \
+ /* Boot configuration vector status */ \
+ X(IDT_SW_SWMODE, IDT_SW_PCI_BCVSTS, 0xF, 0, ## args) \
+ X(IDT_SW_GCLKFSEL, IDT_SW_PCI_BCVSTS, 0x1, 5, ## args) \
+ X(IDT_SW_SSMB_ADDRSET, IDT_SW_PCI_BCVSTS, 0x3, 7, ## args) \
+ X(IDT_SW_CLKMODE, IDT_SW_PCI_BCVSTS, 0x3, 14, ## args) \
+ /* Ports clocking mode */ \
+ X(IDT_SW_P0CLKMODE, IDT_SW_PCI_PCLKMODE, 0x2, 0, ## args) \
+ X(IDT_SW_P2CLKMODE, IDT_SW_PCI_PCLKMODE, 0x2, 2, ## args) \
+ X(IDT_SW_P4CLKMODE, IDT_SW_PCI_PCLKMODE, 0x2, 4, ## args) \
+ X(IDT_SW_P6CLKMODE, IDT_SW_PCI_PCLKMODE, 0x2, 6, ## args) \
+ X(IDT_SW_P8CLKMODE, IDT_SW_PCI_PCLKMODE, 0x2, 8, ## args) \
+ X(IDT_SW_P12CLKMODE, IDT_SW_PCI_PCLKMODE, 0x2, 10, ## args) \
+ X(IDT_SW_P16CLKMODE, IDT_SW_PCI_PCLKMODE, 0x2, 12, ## args) \
+ X(IDT_SW_P20CLKMODE, IDT_SW_PCI_PCLKMODE, 0x2, 14, ## args) \
+ /* Switch Ports Status register (default, Port 0) */ \
+ X(IDT_SW_PORT_LNKUP, IDT_SW_PCI_SWPORT0STS, 0x1, 4, ## args) \
+ X(IDT_SW_PORT_LNKMODE, IDT_SW_PCI_SWPORT0STS, 0x1, 5, ## args) \
+ X(IDT_SW_PORT_MODE, IDT_SW_PCI_SWPORT0STS, 0xF, 6, ## args) \
+ X(IDT_SW_PORT_SWPART, IDT_SW_PCI_SWPORT0STS, 0x7, 10, ## args) \
+ /* Switch Event registers */ \
+ X(IDT_SW_LNKUP_GSTS, IDT_SW_PCI_SESTS, 0x1, 0, ## args) \
+ X(IDT_SW_LNKDN_GSTS, IDT_SW_PCI_SESTS, 0x1, 1, ## args) \
+ X(IDT_SW_FRST_GSTS, IDT_SW_PCI_SESTS, 0x1, 2, ## args) \
+ X(IDT_SW_HRST_GSTS, IDT_SW_PCI_SESTS, 0x1, 3, ## args) \
+ X(IDT_SW_FOVER_GSTS, IDT_SW_PCI_SESTS, 0x1, 4, ## args) \
+ X(IDT_SW_GSIG_GSTS, IDT_SW_PCI_SESTS, 0x1, 5, ## args) \
+ X(IDT_SW_LNKUP_GMSK, IDT_SW_PCI_SEMSK, 0x1, 0, ## args) \
+ X(IDT_SW_LNKDN_GMSK, IDT_SW_PCI_SEMSK, 0x1, 1, ## args) \
+ X(IDT_SW_FRST_GMSK, IDT_SW_PCI_SEMSK, 0x1, 2, ## args) \
+ X(IDT_SW_HRST_GMSK, IDT_SW_PCI_SEMSK, 0x1, 3, ## args) \
+ X(IDT_SW_FOVER_GMSK, IDT_SW_PCI_SEMSK, 0x1, 4, ## args) \
+ X(IDT_SW_GSIG_GMSK, IDT_SW_PCI_SEMSK, 0x1, 5, ## args) \
+ X(IDT_SW_SEPART_GMSK, IDT_SW_PCI_SEPMSK, 0xFF, 0, ## args) \
+ X(IDT_SW_PORTLNKUP_STS, IDT_SW_PCI_SELINKUPSTS, 0xFFF, 0, ## args) \
+ X(IDT_SW_PORTLNKUP_MSK, IDT_SW_PCI_SELINKUPMSK, 0xFFF, 0, ## args) \
+ X(IDT_SW_PORTLNKDN_STS, IDT_SW_PCI_SELINKDNSTS, 0xFFF, 0, ## args) \
+ X(IDT_SW_PORTLNKDN_MSK, IDT_SW_PCI_SELINKDNMSK, 0xFFF, 0, ## args) \
+ X(IDT_SW_PARTFRST_STS, IDT_SW_PCI_SEFRSTSTS, 0xF, 0, ## args) \
+ X(IDT_SW_PARTFRST_MSK, IDT_SW_PCI_SEFRSTMSK, 0xF, 0, ## args) \
+ X(IDT_SW_PARTHRST_STS, IDT_SW_PCI_SEHRSTSTS, 0xF, 0, ## args) \
+ X(IDT_SW_PARTHRST_MSK, IDT_SW_PCI_SEHRSTMSK, 0xF, 0, ## args) \
+ X(IDT_SW_PARTGSIG_STS, IDT_SW_PCI_SEGSIGSTS, 0xF, 0, ## args) \
+ X(IDT_SW_PARTGSIG_MSK, IDT_SW_PCI_SEGSIGMSK, 0xF, 0, ## args) \
+ /* Global DoorBell registers (default, Doorbell 0) */ \
+ X(IDT_SW_PART_GODBELLMSK, IDT_SW_PCI_GODBELLMSK0, 0xF, 0, ## args) \
+ X(IDT_SW_PART_GIDBELLMSK, IDT_SW_PCI_GIDBELLMSK0, 0xF, 0, ## args) \
+ /* Message register (default, Partition 0 Message Control 0) */ \
+ X(IDT_SW_MSGROUTE_REG, IDT_SW_PCI_SWP0MSGCTL0, 0x3, 0, ## args) \
+ X(IDT_SW_MSGROUTE_PART, IDT_SW_PCI_SWP0MSGCTL0, 0x7, 4, ## args) \
+ /* SMBUS status */ \
+ X(IDT_SW_SSMBADDR, IDT_SW_PCI_SMBUSSTS, 0x7F, 1, ## args) \
+ X(IDT_SW_MSMBADDR, IDT_SW_PCI_SMBUSSTS, 0x7F, 9, ## args) \
+ /* Temperature sensor register */ \
+ X(IDT_SW_TMP_LTH, IDT_SW_PCI_TMPCTL, 0xFF, 0, ## args) \
+ X(IDT_SW_TMP_HTH, IDT_SW_PCI_TMPCTL, 0xFF, 16, ## args) \
+ X(IDT_SW_TMP_BLTH_EN, IDT_SW_PCI_TMPCTL, 0x1, 26, ## args) \
+ X(IDT_SW_TMP_AHTH_EN, IDT_SW_PCI_TMPCTL, 0x1, 29, ## args) \
+ X(IDT_SW_TMP_PDOWN, IDT_SW_PCI_TMPCTL, 0x1, 31, ## args) \
+ X(IDT_SW_TMP_CURTEMP, IDT_SW_PCI_TMPSTS, 0xFF, 0, ## args) \
+ X(IDT_SW_TMP_BLTH_STS, IDT_SW_PCI_TMPSTS, 0x1, 24, ## args) \
+ X(IDT_SW_TMP_AHTH_STS, IDT_SW_PCI_TMPSTS, 0x1, 29, ## args) \
+ X(IDT_SW_TMP_BLTH_CLR, IDT_SW_PCI_TMPALARM, 0x1, 24, ## args) \
+ X(IDT_SW_TMP_AHTH_CLR, IDT_SW_PCI_TMPALARM, 0x1, 29, ## args)
+
+/*
+ * Enumeration of the IDT PCIe-switch registers access fields
+ */
+enum idt_ntb_regfld {
+ IDT_NT_REGFLDS(PAIR_ID_ENUM)
+ IDT_NTB_REGFLDS_SPLIT,
+ IDT_SW_REGFLDS(PAIR_ID_ENUM)
+ IDT_NTB_REGFLDS_END
+};
+
+/*
+ * Enumeration of the possible registers size
+ */
+enum idt_ntb_regsize {
+ REGBYTE = 1,
+ REGWORD = 2,
+ REGDWORD = 4
+};
+
+/*
+ * Enumeration of the NT-function Configuration Space registers
+ * NOTE 1) The IDT PCIe-switch internal data is littel-endian
+ * so it must be taken into account in the driver
+ * internals.
+ * 2) Additionally the registers should be accessed either
+ * with byte-enables corresponding to their native size or
+ * the size of one DWORD
+ */
+#define IDT_NT_CFGREGS(X, args...) \
+ /* PCI Express Configuration Space */ \
+ /* Type 0 configuration header */ \
+ X(IDT_NT_PCI_VID, 0x00000, REGWORD, "Vendor Identification", ## args) \
+ X(IDT_NT_PCI_DID, 0x00002, REGWORD, "Device Identification", ## args) \
+ X(IDT_NT_PCI_CMD, 0x00004, REGWORD, "PCI Command", ## args) \
+ X(IDT_NT_PCI_STS, 0x00006, REGWORD, "PCI Status", ## args) \
+ X(IDT_NT_PCI_RID, 0x00008, REGBYTE, "Revision Identification", ## args) \
+ X(IDT_NT_PCI_PROGIF, 0x00009, REGBYTE, "Program Interface", ## args) \
+ X(IDT_NT_PCI_SCCLASS, 0x0000A, REGBYTE, "Sub Class Code", ## args) \
+ X(IDT_NT_PCI_CLASS, 0x0000B, REGBYTE, "Class Code", ## args) \
+ X(IDT_NT_PCI_CLS, 0x0000C, REGBYTE, "Cache Line Size", ## args) \
+ X(IDT_NT_PCI_LTIMER, 0x0000D, REGBYTE, "Latency Time", ## args) \
+ X(IDT_NT_PCI_HDR, 0x0000E, REGBYTE, "Header Type", ## args) \
+ X(IDT_NT_PCI_BIST, 0x0000F, REGBYTE, "Built-in Self Test Register", ## args) \
+ X(IDT_NT_PCI_BAR0, 0x00010, REGDWORD, "Base Address Register 0", ## args) \
+ X(IDT_NT_PCI_BAR1, 0x00014, REGDWORD, "Base Address Register 1", ## args) \
+ X(IDT_NT_PCI_BAR2, 0x00018, REGDWORD, "Base Address Register 2", ## args) \
+ X(IDT_NT_PCI_BAR3, 0x0001C, REGDWORD, "Base Address Register 3", ## args) \
+ X(IDT_NT_PCI_BAR4, 0x00020, REGDWORD, "Base Address Register 4", ## args) \
+ X(IDT_NT_PCI_BAR5, 0x00024, REGDWORD, "Base Address Register 5", ## args) \
+ X(IDT_NT_PCI_CCISPTR, 0x00028, REGDWORD, "CardBus CIS Pointer", ## args) \
+ X(IDT_NT_PCI_SUBVID, 0x0002C, REGWORD, "Subsystem Vendor ID Pointer", ## args) \
+ X(IDT_NT_PCI_SUBID, 0x0002E, REGWORD, "Subsystem ID Pointer", ## args) \
+ X(IDT_NT_PCI_EROMBASE, 0x00030, REGWORD, "Expansion ROM Base", ## args) \
+ X(IDT_NT_PCI_CAPPTR, 0x00034, REGBYTE, "Capabilities Pointer", ## args) \
+ X(IDT_NT_PCI_INTRLINE, 0x0003C, REGBYTE, "Interrupt Line", ## args) \
+ X(IDT_NT_PCI_INTRPIN, 0x0003D, REGBYTE, "Interrupt PIN", ## args) \
+ X(IDT_NT_PCI_MINGNT, 0x0003E, REGBYTE, "Minimum Grant", ## args) \
+ X(IDT_NT_PCI_MAXLAT, 0x0003F, REGBYTE, "Maximum Latency", ## args) \
+ /* PCI Express capablity structure */ \
+ X(IDT_NT_PCI_PCIECAP, 0x00040, REGDWORD, "PCI Express Capability", ## args) \
+ X(IDT_NT_PCI_PCIEDCAP, 0x00044, REGDWORD, "PCI Express Device Capabilities", ## args) \
+ X(IDT_NT_PCI_PCIEDCTL, 0x00048, REGWORD, "PCI Express Device Control", ## args) \
+ X(IDT_NT_PCI_PCIEDSTS, 0x0004A, REGWORD, "PCI Express Device Status", ## args) \
+ X(IDT_NT_PCI_PCIELCAP, 0x0004C, REGDWORD, "PCI Express Link Capabilities", ## args) \
+ X(IDT_NT_PCI_PCIELCTL, 0x00050, REGWORD, "PCI Express Link Control", ## args) \
+ X(IDT_NT_PCI_PCIELSTS, 0x00052, REGWORD, "PCI Express Link Status", ## args) \
+ X(IDT_NT_PCI_PCIEDCAP2, 0x00064, REGDWORD, "PCI Express Device Capabilities 2", ## args) \
+ X(IDT_NT_PCI_PCIEDCTL2, 0x00068, REGWORD, "PCI Express Device Control 2", ## args) \
+ X(IDT_NT_PCI_PCIEDSTS2, 0x0006A, REGWORD, "PCI Express Device Status 2", ## args) \
+ X(IDT_NT_PCI_PCIELCAP2, 0x0006C, REGDWORD, "PCI Express Link Capabilities 2", ## args) \
+ X(IDT_NT_PCI_PCIELCTL2, 0x00070, REGWORD, "PCI Express Link Control 2", ## args) \
+ X(IDT_NT_PCI_PCIELSTS2, 0x00072, REGWORD, "PCI Express Link Status 2", ## args) \
+ /* PCI Power Management capability structure */ \
+ X(IDT_NT_PCI_PMCAP, 0x000C0, REGDWORD, "PCI Power Management Capabilities", ## args) \
+ X(IDT_NT_PCI_PMCSR, 0x000C4, REGDWORD, "PCI Power Management Control and Status", ## args) \
+ /* MSI Capability structure */ \
+ X(IDT_NT_PCI_MSICAP, 0x000D0, REGDWORD, "Message Signaled Interrupt Capability and Control", ## args) \
+ X(IDT_NT_PCI_MSIADDR, 0x000D4, REGDWORD, "Message Signaled Interrupt Address", ## args) \
+ X(IDT_NT_PCI_MSIUADDR, 0x000D8, REGDWORD, "Message Signaled Interrupt Upper Address", ## args) \
+ X(IDT_NT_PCI_MSIMDATA, 0x000DC, REGDWORD, "Message Signaled Interrupt Message Data", ## args) \
+ /* SSID/SSVID capability structure */ \
+ X(IDT_NT_PCI_SSIDSSVIDCAP, 0x000F0, REGDWORD, "Subsystem ID and Subsystem Vendor ID Capability", ## args) \
+ X(IDT_NT_PCI_SSIDSSVID, 0x000F4, REGDWORD, "Subsystem ID and Subsystem Vendor ID", ## args) \
+ /* Extended access registers */ \
+ X(IDT_NT_PCI_ECFGADDR, 0x000F8, REGDWORD, "Extended Configuration Space Access Address", ## args) \
+ X(IDT_NT_PCI_ECFGDATA, 0x000FC, REGDWORD, "Extended Configuration Space Access Data", ## args) \
+ /*==============64 REGDWORDs ================*/ \
+ /* PCI Express Extended Configuration Space */ \
+ /* Advanced Error Reporting enhanced capability */ \
+ X(IDT_NT_PCI_AERCAP, 0x00100, REGDWORD, "AER Capabilities ", ## args) \
+ X(IDT_NT_PCI_AERUES, 0x00104, REGDWORD, "AER Uncorrectable Error Status", ## args) \
+ X(IDT_NT_PCI_AERUEM, 0x00108, REGDWORD, "AER Uncorrectable Error Mask ", ## args) \
+ X(IDT_NT_PCI_AERUESV, 0x0010C, REGDWORD, "AER Uncorrectable Error Severity ", ## args) \
+ X(IDT_NT_PCI_AERCES, 0x00110, REGDWORD, "AER Correctable Error Status ", ## args) \
+ X(IDT_NT_PCI_AERCEM, 0x00114, REGDWORD, "AER Correctable Error Mask", ## args) \
+ X(IDT_NT_PCI_AERCTL, 0x00118, REGDWORD, "AER Control", ## args) \
+ X(IDT_NT_PCI_AERHL1DW, 0x0011C, REGDWORD, "AER Header Log 1st Doubleword", ## args) \
+ X(IDT_NT_PCI_AERHL2DW, 0x00120, REGDWORD, "AER Header Log 2nd Doubleword", ## args) \
+ X(IDT_NT_PCI_AERHL3DW, 0x00124, REGDWORD, "AER Header Log 3rd Doubleword", ## args) \
+ X(IDT_NT_PCI_AERHL4DW, 0x00128, REGDWORD, "AER Header Log 4th Doubleword", ## args) \
+ /* Device Serial Number enhanced capability */ \
+ X(IDT_NT_PCI_SNUMCAP, 0x00180, REGDWORD, "Serial Number Capabilities", ## args) \
+ X(IDT_NT_PCI_SNUMLDW, 0x00184, REGDWORD, "Serial Number Lower Doubleword", ## args) \
+ X(IDT_NT_PCI_SNUMUDW, 0x00188, REGDWORD, "Serial Number Upper Doubleword", ## args) \
+ /* PCIe Virtual Channel enhanced capability */ \
+ X(IDT_NT_PCI_PCIEVCECAP, 0x00200, REGDWORD, "PCI Express VC Extended Capability Header", ## args) \
+ X(IDT_NT_PCI_PVCCAP1, 0x00204, REGDWORD, "Port VC Capability 1", ## args) \
+ X(IDT_NT_PCI_PVCCAP2, 0x00208, REGDWORD, "Port VC Capability 2", ## args) \
+ X(IDT_NT_PCI_PVCCTL, 0x0020C, REGDWORD, "Port VC Control", ## args) \
+ X(IDT_NT_PCI_PVCSTS, 0x0020E, REGDWORD, "Port VC Status ", ## args) \
+ X(IDT_NT_PCI_VCR0CAP, 0x00210, REGDWORD, "VC Resource 0 Capability", ## args) \
+ X(IDT_NT_PCI_VCR0CTL, 0x00214, REGDWORD, "VC Resource 0 Control", ## args) \
+ X(IDT_NT_PCI_VCR0STS, 0x00218, REGDWORD, "VC Resource 0 Status", ## args) \
+ /* ACS enhanced capability */ \
+ X(IDT_NT_PCI_ACSECAPH, 0x00320, REGDWORD, "ACS Extended Capability Header", ## args) \
+ X(IDT_NT_PCI_ACSCAP, 0x00324, REGWORD, "ACS Capability", ## args) \
+ X(IDT_NT_PCI_ACSCTL, 0x00326, REGWORD, "ACS Control", ## args) \
+ X(IDT_NT_PCI_MCCAPH, 0x00330, REGDWORD, "Multicast Extended Capability Header", ## args) \
+ X(IDT_NT_PCI_MCCAP, 0x00334, REGWORD, "Multicast Capability", ## args) \
+ X(IDT_NT_PCI_MCCTL, 0x00336, REGWORD, "Multicast Control", ## args) \
+ X(IDT_NT_PCI_MCBARL, 0x00338, REGDWORD, "Multicast Base Address Low", ## args) \
+ X(IDT_NT_PCI_MCBARH, 0x0033C, REGDWORD, "Multicast Base Address High", ## args) \
+ X(IDT_NT_PCI_MCRCVL, 0x00340, REGDWORD, "Multicast Receive Low", ## args) \
+ X(IDT_NT_PCI_MCRCVH, 0x00344, REGDWORD, "Multicast Receive High", ## args) \
+ X(IDT_NT_PCI_MCBLKALLL, 0x00348, REGDWORD, "Multicast Block All Low", ## args) \
+ X(IDT_NT_PCI_MCBLKALLH, 0x0034C, REGDWORD, "Multicast Block All High", ## args) \
+ X(IDT_NT_PCI_MCBLKUTL, 0x00350, REGDWORD, "Multicast Block Untranslated Low", ## args) \
+ X(IDT_NT_PCI_MCBLKUTH, 0x00354, REGDWORD, "Multicast Block Untranslated High", ## args) \
+ /*==========================================*/ \
+ /* IDT Proprietary NT-port-specific registers */ \
+ /* NT-function main control registers */ \
+ X(IDT_NT_PCI_NTCTL, 0x00400, REGDWORD, "NT Endpoint Control", ## args) \
+ X(IDT_NT_PCI_NTINTSTS, 0x00404, REGDWORD, "NT Endpoint Interrupt Status", ## args) \
+ X(IDT_NT_PCI_NTINTMSK, 0x00408, REGDWORD, "NT Endpoint Interrupt Mask", ## args) \
+ X(IDT_NT_PCI_NTSDATA, 0x0040C, REGDWORD, "NT Endpoint Signal Data", ## args) \
+ X(IDT_NT_PCI_NTGSIGNAL, 0x00410, REGDWORD, "NT Endpoint Global Signal", ## args) \
+ X(IDT_NT_PCI_NTIERRORMSK0, 0x00414, REGDWORD, "Internal Error Reporting Mask 0", ## args) \
+ X(IDT_NT_PCI_NTIERRORMSK1, 0x00418, REGDWORD, "Internal Error Reporting Mask 1", ## args) \
+ /* Doorbel registers */ \
+ X(IDT_NT_PCI_OUTDBELLSET, 0x00420, REGDWORD, "NT Outbound Doorbell Set", ## args) \
+ X(IDT_NT_PCI_INDBELLSTS, 0x00428, REGDWORD, "NT Inbound Doorbell Status", ## args) \
+ X(IDT_NT_PCI_INDBELLMSK, 0x0042C, REGDWORD, "NT Inbound Doorbell Mask", ## args) \
+ /* Message registers */ \
+ X(IDT_NT_PCI_OUTMSG0, 0x00430, REGDWORD, "Outbound Message 0", ## args) \
+ X(IDT_NT_PCI_OUTMSG1, 0x00434, REGDWORD, "Outbound Message 1", ## args) \
+ X(IDT_NT_PCI_OUTMSG2, 0x00438, REGDWORD, "Outbound Message 2", ## args) \
+ X(IDT_NT_PCI_OUTMSG3, 0x0043C, REGDWORD, "Outbound Message 3", ## args) \
+ X(IDT_NT_PCI_INMSG0, 0x00440, REGDWORD, "Inbound Message 0", ## args) \
+ X(IDT_NT_PCI_INMSG1, 0x00444, REGDWORD, "Inbound Message 1", ## args) \
+ X(IDT_NT_PCI_INMSG2, 0x00448, REGDWORD, "Inbound Message 2", ## args) \
+ X(IDT_NT_PCI_INMSG3, 0x0044C, REGDWORD, "Inbound Message 3", ## args) \
+ X(IDT_NT_PCI_INMSGSRC0, 0x00450, REGDWORD, "Inbound Message Source 0", ## args) \
+ X(IDT_NT_PCI_INMSGSRC1, 0x00454, REGDWORD, "Inbound Message Source 1", ## args) \
+ X(IDT_NT_PCI_INMSGSRC2, 0x00458, REGDWORD, "Inbound Message Source 2", ## args) \
+ X(IDT_NT_PCI_INMSGSRC3, 0x0045C, REGDWORD, "Inbound Message Source 3", ## args) \
+ X(IDT_NT_PCI_MSGSTS, 0x00460, REGDWORD, "Message Status", ## args) \
+ X(IDT_NT_PCI_MSGSTSMSK, 0x00464, REGDWORD, "Message Status Mask", ## args) \
+ /* BAR-setup registers */ \
+ X(IDT_NT_PCI_BARSETUP0, 0x00470, REGDWORD, "BAR 0 Setup", ## args) \
+ X(IDT_NT_PCI_BARLIMIT0, 0x00474, REGDWORD, "BAR 0 Limit Address", ## args) \
+ X(IDT_NT_PCI_BARLTBASE0, 0x00478, REGDWORD, "BAR 0 Lower Translated Base Address", ## args) \
+ X(IDT_NT_PCI_BARUTBASE0, 0x0047C, REGDWORD, "BAR 0 Upper Translated Base Address", ## args) \
+ X(IDT_NT_PCI_BARSETUP1, 0x00480, REGDWORD, "BAR 1 Setup", ## args) \
+ X(IDT_NT_PCI_BARLIMIT1, 0x00484, REGDWORD, "BAR 1 Limit Address", ## args) \
+ X(IDT_NT_PCI_BARLTBASE1, 0x00488, REGDWORD, "BAR 1 Lower Translated Base Address", ## args) \
+ X(IDT_NT_PCI_BARUTBASE1, 0x0048C, REGDWORD, "BAR 1 Upper Translated Base Address", ## args) \
+ X(IDT_NT_PCI_BARSETUP2, 0x00490, REGDWORD, "BAR 2 Setup", ## args) \
+ X(IDT_NT_PCI_BARLIMIT2, 0x00494, REGDWORD, "BAR 2 Limit Address", ## args) \
+ X(IDT_NT_PCI_BARLTBASE2, 0x00498, REGDWORD, "BAR 2 Lower Translated Base Address", ## args) \
+ X(IDT_NT_PCI_BARUTBASE2, 0x0049C, REGDWORD, "BAR 2 Upper Translated Base Address", ## args) \
+ X(IDT_NT_PCI_BARSETUP3, 0x004A0, REGDWORD, "BAR 3 Setup", ## args) \
+ X(IDT_NT_PCI_BARLIMIT3, 0x004A4, REGDWORD, "BAR 3 Limit Address", ## args) \
+ X(IDT_NT_PCI_BARLTBASE3, 0x004A8, REGDWORD, "BAR 3 Lower Translated Base Address", ## args) \
+ X(IDT_NT_PCI_BARUTBASE3, 0x004AC, REGDWORD, "BAR 3 Upper Translated Base Address", ## args) \
+ X(IDT_NT_PCI_BARSETUP4, 0x004B0, REGDWORD, "BAR 4 Setup", ## args) \
+ X(IDT_NT_PCI_BARLIMIT4, 0x004B4, REGDWORD, "BAR 4 Limit Address", ## args) \
+ X(IDT_NT_PCI_BARLTBASE4, 0x004B8, REGDWORD, "BAR 4 Lower Translated Base Address", ## args) \
+ X(IDT_NT_PCI_BARUTBASE4, 0x004BC, REGDWORD, "BAR 4 Upper Translated Base Address", ## args) \
+ X(IDT_NT_PCI_BARSETUP5, 0x004C0, REGDWORD, "BAR 5 Setup", ## args) \
+ X(IDT_NT_PCI_BARLIMIT5, 0x004C4, REGDWORD, "BAR 5 Limit Address", ## args) \
+ X(IDT_NT_PCI_BARLTBASE5, 0x004C8, REGDWORD, "BAR 5 Lower Translated Base Address", ## args) \
+ X(IDT_NT_PCI_BARUTBASE5, 0x004CC, REGDWORD, "BAR 5 Upper Translated Base Address", ## args) \
+ /* NT mapping table registers */ \
+ X(IDT_NT_PCI_NTMTBLADDR, 0x004D0, REGDWORD, "NT Mapping Table Address", ## args) \
+ X(IDT_NT_PCI_NTMTBLSTS, 0x004D4, REGDWORD, "NT Mapping Table Status", ## args) \
+ X(IDT_NT_PCI_NTMTBLDATA, 0x004D8, REGDWORD, "NT Mapping Table Data", ## args) \
+ X(IDT_NT_PCI_REQIDCAP, 0x004DC, REGDWORD, "Requester ID Capture", ## args) \
+ /* Memory Windows Lookup table registers */ \
+ X(IDT_NT_PCI_LUTOFFSET, 0x004E0, REGDWORD, "Lookup Table Offset", ## args) \
+ X(IDT_NT_PCI_LUTLDATA, 0x004E4, REGDWORD, "Lookup Table Lower Data", ## args) \
+ X(IDT_NT_PCI_LUTMDATA, 0x004E8, REGDWORD, "Lookup Table Middle Data", ## args) \
+ X(IDT_NT_PCI_LUTUDATA, 0x004EC, REGDWORD, "Lookup Table Upper Data", ## args) \
+ /* NT Endpoint Errors Emulation registers */ \
+ X(IDT_NT_PCI_NTUEEM, 0x004F0, REGDWORD, "NT Endpoint Uncorrectable Error Emulation", ## args) \
+ X(IDT_NT_PCI_NTCEEM, 0x004F4, REGDWORD, "NT Endpoint Correctable Error Emulation", ## args) \
+ /* Punch-through registers */ \
+ X(IDT_NT_PCI_PTCCTL0, 0x00510, REGDWORD, "Punch-Through Configuration Control 0", ## args) \
+ X(IDT_NT_PCI_PTCCTL1, 0x00514, REGDWORD, "Punch-Through Configuration Control 1", ## args) \
+ X(IDT_NT_PCI_PTCDATA, 0x00518, REGDWORD, "Punch-Through Data", ## args) \
+ X(IDT_NT_PCI_PTCSTS, 0x0051C, REGDWORD, "Punch-Through Status", ## args) \
+ /* NT Multicast Group x Port association */ \
+ X(IDT_NT_PCI_NTMCG0PA, 0x00600, REGDWORD, "NT Multicast Group x Port Association", ## args) \
+ X(IDT_NT_PCI_NTMCG1PA, 0x00604, REGDWORD, "NT Multicast Group x Port Association", ## args) \
+ X(IDT_NT_PCI_NTMCG2PA, 0x00608, REGDWORD, "NT Multicast Group x Port Association", ## args) \
+ X(IDT_NT_PCI_NTMCG3PA, 0x0060C, REGDWORD, "NT Multicast Group x Port Association", ## args) \
+ /* Global Address Space Access registers */ \
+ /*X(IDT_NT_PCI_GASAADDR, 0x00FF8, REGDWORD, "Global Address Space Access Address", ## args) \
+ *X(IDT_NT_PCI_GASADATA, 0x00FFC, REGDWORD, "Global Address Space Access Data", ## args)*/
+
+/*
+ * Table of the IDT PCIe-switch Global Configuration and Status
+ * registers, corresponding size and the string name
+ */
+#define IDT_SW_CFGREGS(X, args...) \
+ /* Basic NT-function globally accessed registers */ \
+ /* Port 0 */ \
+ X(IDT_SW_PCI_NTP0_CMD, 0x01004, REGWORD, "Port 0 PCI Command", ## args) \
+ X(IDT_SW_PCI_NTP0_PCIELSTS, 0x01052, REGWORD, "Port 0 PCIe link status", ## args) \
+ X(IDT_SW_PCI_NTP0_NTSDATA, 0x0140C, REGDWORD, "Port 0 NT Signal data", ## args) \
+ X(IDT_SW_PCI_NTP0_NTGSIGNAL, 0x01410, REGDWORD, "Port 0 NT Global Signal", ## args) \
+ /* Port 2 */ \
+ X(IDT_SW_PCI_NTP2_CMD, 0x05004, REGWORD, "Port 2 PCI Command", ## args) \
+ X(IDT_SW_PCI_NTP2_PCIELSTS, 0x05052, REGWORD, "Port 2 PCIe link status", ## args) \
+ X(IDT_SW_PCI_NTP2_NTSDATA, 0x0540C, REGDWORD, "Port 2 NT Signal data", ## args) \
+ X(IDT_SW_PCI_NTP2_NTGSIGNAL, 0x05410, REGDWORD, "Port 2 NT Global Signal", ## args) \
+ /* Port 4 */ \
+ X(IDT_SW_PCI_NTP4_CMD, 0x09004, REGWORD, "Port 4 PCI Command", ## args) \
+ X(IDT_SW_PCI_NTP4_PCIELSTS, 0x09052, REGWORD, "Port 4 PCIe link status", ## args) \
+ X(IDT_SW_PCI_NTP4_NTSDATA, 0x0940C, REGDWORD, "Port 4 NT Signal data", ## args) \
+ X(IDT_SW_PCI_NTP4_NTGSIGNAL, 0x09410, REGDWORD, "Port 4 NT Global Signal", ## args) \
+ /* Port 6 */ \
+ X(IDT_SW_PCI_NTP6_CMD, 0x0D004, REGWORD, "Port 6 PCI Command", ## args) \
+ X(IDT_SW_PCI_NTP6_PCIELSTS, 0x0D052, REGWORD, "Port 6 PCIe link status", ## args) \
+ X(IDT_SW_PCI_NTP6_NTSDATA, 0x0D40C, REGDWORD, "Port 6 NT Signal data", ## args) \
+ X(IDT_SW_PCI_NTP6_NTGSIGNAL, 0x0D410, REGDWORD, "Port 6 NT Global Signal", ## args) \
+ /* Port 8 */ \
+ X(IDT_SW_PCI_NTP8_CMD, 0x11004, REGWORD, "Port 8 PCI Command", ## args) \
+ X(IDT_SW_PCI_NTP8_PCIELSTS, 0x11052, REGWORD, "Port 8 PCIe link status", ## args) \
+ X(IDT_SW_PCI_NTP8_NTSDATA, 0x1140C, REGDWORD, "Port 8 NT Signal data", ## args) \
+ X(IDT_SW_PCI_NTP8_NTGSIGNAL, 0x11410, REGDWORD, "Port 8 NT Global Signal", ## args) \
+ /* Port 12 */ \
+ X(IDT_SW_PCI_NTP12_CMD, 0x19004, REGWORD, "Port 12 PCI Command", ## args) \
+ X(IDT_SW_PCI_NTP12_PCIELSTS, 0x19052, REGWORD, "Port 12 PCIe link status", ## args) \
+ X(IDT_SW_PCI_NTP12_NTSDATA, 0x1940C, REGDWORD, "Port 12 NT Signal data", ## args) \
+ X(IDT_SW_PCI_NTP12_NTGSIGNAL, 0x19410, REGDWORD, "Port 12 NT Global Signal", ## args) \
+ /* Port 16 */ \
+ X(IDT_SW_PCI_NTP16_CMD, 0x21004, REGWORD, "Port 16 PCI Command", ## args) \
+ X(IDT_SW_PCI_NTP16_PCIELSTS, 0x21052, REGWORD, "Port 16 PCIe link status", ## args) \
+ X(IDT_SW_PCI_NTP16_NTSDATA, 0x2140C, REGDWORD, "Port 16 NT Signal data", ## args) \
+ X(IDT_SW_PCI_NTP16_NTGSIGNAL, 0x21410, REGDWORD, "Port 16 NT Global Signal", ## args) \
+ /* Port 20 */ \
+ X(IDT_SW_PCI_NTP20_CMD, 0x29004, REGWORD, "Port 20 PCI Command", ## args) \
+ X(IDT_SW_PCI_NTP20_PCIELSTS, 0x29052, REGWORD, "Port 20 PCIe link status", ## args) \
+ X(IDT_SW_PCI_NTP20_NTSDATA, 0x2940C, REGDWORD, "Port 20 NT Signal data", ## args) \
+ X(IDT_SW_PCI_NTP20_NTGSIGNAL, 0x29410, REGDWORD, "Port 20 NT Global Signal", ## args) \
+ /* IDT PCIe-switch control registers */ \
+ X(IDT_SW_PCI_SWCTL, 0x3E000, REGDWORD, "Switch Control", ## args) \
+ X(IDT_SW_PCI_BCVSTS, 0x3E004, REGDWORD, "Boot Configuration Vector Status", ## args) \
+ X(IDT_SW_PCI_PCLKMODE, 0x3E008, REGDWORD, "Port Clocking Mode", ## args) \
+ X(IDT_SW_PCI_STK0CFG, 0x3E010, REGDWORD, "Stack 0 Configuration", ## args) \
+ X(IDT_SW_PCI_STK1CFG, 0x3E014, REGDWORD, "Stack 1 Configuration", ## args) \
+ X(IDT_SW_PCI_STK2CFG, 0x3E018, REGDWORD, "Stack 2 Configuration", ## args) \
+ X(IDT_SW_PCI_STK3CFG, 0x3E01C, REGDWORD, "Stack 3 Configuration", ## args) \
+ /* Switch initialization delays */ \
+ X(IDT_SW_PCI_RDRAINDELAY, 0x3E080, REGDWORD, "Reset Drain Delay ", ## args) \
+ X(IDT_SW_PCI_POMCDELAY, 0x3E084, REGDWORD, "Port Operating Mode Change Drain Delay", ## args) \
+ X(IDT_SW_PCI_SEDELAY, 0x3E088, REGDWORD, "Side Effect Delay", ## args) \
+ X(IDT_SW_PCI_USSBRDELAY, 0x3E08C, REGDWORD, "Upstream Secondary Bus Reset Delay", ## args) \
+ /* Switch Partitions control and status registers */ \
+ X(IDT_SW_PCI_SWPART0CTL, 0x3E100, REGDWORD, "Switch Partition 0 Control", ## args) \
+ X(IDT_SW_PCI_SWPART0STS, 0x3E104, REGDWORD, "Switch Partition 0 Status", ## args) \
+ X(IDT_SW_PCI_SWPART0FCTL, 0x3E108, REGDWORD, "Switch Partition 0 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPART1CTL, 0x3E120, REGDWORD, "Switch Partition 1 Control", ## args) \
+ X(IDT_SW_PCI_SWPART1STS, 0x3E124, REGDWORD, "Switch Partition 1 Status", ## args) \
+ X(IDT_SW_PCI_SWPART1FCTL, 0x3E128, REGDWORD, "Switch Partition 1 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPART2CTL, 0x3E140, REGDWORD, "Switch Partition 2 Control", ## args) \
+ X(IDT_SW_PCI_SWPART2STS, 0x3E144, REGDWORD, "Switch Partition 2 Status", ## args) \
+ X(IDT_SW_PCI_SWPART2FCTL, 0x3E148, REGDWORD, "Switch Partition 2 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPART3CTL, 0x3E160, REGDWORD, "Switch Partition 3 Control", ## args) \
+ X(IDT_SW_PCI_SWPART3STS, 0x3E164, REGDWORD, "Switch Partition 3 Status", ## args) \
+ X(IDT_SW_PCI_SWPART3FCTL, 0x3E168, REGDWORD, "Switch Partition 3 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPART4CTL, 0x3E180, REGDWORD, "Switch Partition 4 Control", ## args) \
+ X(IDT_SW_PCI_SWPART4STS, 0x3E184, REGDWORD, "Switch Partition 4 Status", ## args) \
+ X(IDT_SW_PCI_SWPART4FCTL, 0x3E188, REGDWORD, "Switch Partition 4 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPART5CTL, 0x3E1A0, REGDWORD, "Switch Partition 5 Control", ## args) \
+ X(IDT_SW_PCI_SWPART5STS, 0x3E1A4, REGDWORD, "Switch Partition 5 Status", ## args) \
+ X(IDT_SW_PCI_SWPART5FCTL, 0x3E1A8, REGDWORD, "Switch Partition 5 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPART6CTL, 0x3E1C0, REGDWORD, "Switch Partition 6 Control", ## args) \
+ X(IDT_SW_PCI_SWPART6STS, 0x3E1C4, REGDWORD, "Switch Partition 6 Status", ## args) \
+ X(IDT_SW_PCI_SWPART6FCTL, 0x3E1C8, REGDWORD, "Switch Partition 6 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPART7CTL, 0x3E1E0, REGDWORD, "Switch Partition 7 Control", ## args) \
+ X(IDT_SW_PCI_SWPART7STS, 0x3E1E4, REGDWORD, "Switch Partition 7 Status", ## args) \
+ X(IDT_SW_PCI_SWPART7FCTL, 0x3E1E8, REGDWORD, "Switch Partition 7 Failover Control", ## args) \
+ /* Switch Ports control and status registers */ \
+ X(IDT_SW_PCI_SWPORT0CTL, 0x3E200, REGDWORD, "Switch Port 0 Control", ## args) \
+ X(IDT_SW_PCI_SWPORT0STS, 0x3E204, REGDWORD, "Switch Port 0 Status", ## args) \
+ X(IDT_SW_PCI_SWPORT0FCTL, 0x3E208, REGDWORD, "Switch Port 0 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPORT2CTL, 0x3E240, REGDWORD, "Switch Port 2 Control", ## args) \
+ X(IDT_SW_PCI_SWPORT2STS, 0x3E244, REGDWORD, "Switch Port 2 Status", ## args) \
+ X(IDT_SW_PCI_SWPORT2FCTL, 0x3E248, REGDWORD, "Switch Port 2 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPORT4CTL, 0x3E280, REGDWORD, "Switch Port 4 Control", ## args) \
+ X(IDT_SW_PCI_SWPORT4STS, 0x3E284, REGDWORD, "Switch Port 4 Status", ## args) \
+ X(IDT_SW_PCI_SWPORT4FCTL, 0x3E288, REGDWORD, "Switch Port 4 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPORT6CTL, 0x3E2C0, REGDWORD, "Switch Port 6 Control", ## args) \
+ X(IDT_SW_PCI_SWPORT6STS, 0x3E2C4, REGDWORD, "Switch Port 6 Status", ## args) \
+ X(IDT_SW_PCI_SWPORT6FCTL, 0x3E2C8, REGDWORD, "Switch Port 6 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPORT8CTL, 0x3E300, REGDWORD, "Switch Port 8 Control", ## args) \
+ X(IDT_SW_PCI_SWPORT8STS, 0x3E304, REGDWORD, "Switch Port 8 Status", ## args) \
+ X(IDT_SW_PCI_SWPORT8FCTL, 0x3E308, REGDWORD, "Switch Port 8 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPORT12CTL, 0x3E380, REGDWORD, "Switch Port 12 Control", ## args) \
+ X(IDT_SW_PCI_SWPORT12STS, 0x3E384, REGDWORD, "Switch Port 12 Status", ## args) \
+ X(IDT_SW_PCI_SWPORT12FCTL, 0x3E388, REGDWORD, "Switch Port 12 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPORT16CTL, 0x3E400, REGDWORD, "Switch Port 16 Control", ## args) \
+ X(IDT_SW_PCI_SWPORT16STS, 0x3E404, REGDWORD, "Switch Port 16 Status", ## args) \
+ X(IDT_SW_PCI_SWPORT16FCTL, 0x3E408, REGDWORD, "Switch Port 16 Failover Control", ## args) \
+ X(IDT_SW_PCI_SWPORT20CTL, 0x3E480, REGDWORD, "Switch Port 20 Control", ## args) \
+ X(IDT_SW_PCI_SWPORT20STS, 0x3E484, REGDWORD, "Switch Port 20 Status", ## args) \
+ X(IDT_SW_PCI_SWPORT20FCTL, 0x3E488, REGDWORD, "Switch Port 20 Failover Control", ## args) \
+ /* Failover capability control and status registers */ \
+ X(IDT_SW_PCI_FCAP0CTL, 0x3E500, REGDWORD, "Failover Capability 0 Control", ## args) \
+ X(IDT_SW_PCI_FCAP0STS, 0x3E504, REGDWORD, "Failover Capability 0 Status", ## args) \
+ X(IDT_SW_PCI_FCAP0TIMER, 0x3E508, REGDWORD, "Failover Capability 0 Watchdog Timer", ## args) \
+ X(IDT_SW_PCI_FCAP1CTL, 0x3E520, REGDWORD, "Failover Capability 1 Control", ## args) \
+ X(IDT_SW_PCI_FCAP1STS, 0x3E524, REGDWORD, "Failover Capability 1 Status", ## args) \
+ X(IDT_SW_PCI_FCAP1TIMER, 0x3E528, REGDWORD, "Failover Capability 1 Watchdog Timer", ## args) \
+ X(IDT_SW_PCI_FCAP2CTL, 0x3E540, REGDWORD, "Failover Capability 2 Control", ## args) \
+ X(IDT_SW_PCI_FCAP2STS, 0x3E544, REGDWORD, "Failover Capability 2 Status", ## args) \
+ X(IDT_SW_PCI_FCAP2TIMER, 0x3E548, REGDWORD, "Failover Capability 2 Watchdog Timer", ## args) \
+ X(IDT_SW_PCI_FCAP3CTL, 0x3E560, REGDWORD, "Failover Capability 3 Control", ## args) \
+ X(IDT_SW_PCI_FCAP3STS, 0x3E564, REGDWORD, "Failover Capability 3 Status", ## args) \
+ X(IDT_SW_PCI_FCAP3TIMER, 0x3E568, REGDWORD, "Failover Capability 3 Watchdog Timer", ## args) \
+ /* Protection registers */ \
+ X(IDT_SW_PCI_GASAPROT, 0x3E700, REGDWORD, "Global Address Space Access Protection", ## args) \
+ X(IDT_SW_PCI_NTMTBLPROT0, 0x3E710, REGDWORD, "Partition 0 NT Mapping Table Protection", ## args) \
+ X(IDT_SW_PCI_NTMTBLPROT1, 0x3E714, REGDWORD, "Partition 1 NT Mapping Table Protection", ## args) \
+ X(IDT_SW_PCI_NTMTBLPROT2, 0x3E718, REGDWORD, "Partition 2 NT Mapping Table Protection", ## args) \
+ X(IDT_SW_PCI_NTMTBLPROT3, 0x3E71C, REGDWORD, "Partition 3 NT Mapping Table Protection", ## args) \
+ X(IDT_SW_PCI_NTMTBLPROT4, 0x3E720, REGDWORD, "Partition 4 NT Mapping Table Protection", ## args) \
+ X(IDT_SW_PCI_NTMTBLPROT5, 0x3E724, REGDWORD, "Partition 5 NT Mapping Table Protection", ## args) \
+ X(IDT_SW_PCI_NTMTBLPROT6, 0x3E728, REGDWORD, "Partition 6 NT Mapping Table Protection", ## args) \
+ X(IDT_SW_PCI_NTMTBLPROT7, 0x3E72C, REGDWORD, "Partition 7 NT Mapping Table Protection", ## args) \
+ /* Switch Event registers */ \
+ X(IDT_SW_PCI_SESTS, 0x3EC00, REGDWORD, "Switch Event Status", ## args) \
+ X(IDT_SW_PCI_SEMSK, 0x3EC04, REGDWORD, "Switch Event Mask", ## args) \
+ X(IDT_SW_PCI_SEPMSK, 0x3EC08, REGDWORD, "Switch Event Partition Mask", ## args) \
+ X(IDT_SW_PCI_SELINKUPSTS, 0x3EC0C, REGDWORD, "Switch Event Link Up Status", ## args) \
+ X(IDT_SW_PCI_SELINKUPMSK, 0x3EC10, REGDWORD, "Switch Event Link Up Mask", ## args) \
+ X(IDT_SW_PCI_SELINKDNSTS, 0x3EC14, REGDWORD, "Switch Event Link Down Status", ## args) \
+ X(IDT_SW_PCI_SELINKDNMSK, 0x3EC18, REGDWORD, "Switch Event Link Down Mask", ## args) \
+ X(IDT_SW_PCI_SEFRSTSTS, 0x3EC1C, REGDWORD, "Switch Event Fundamental Reset Status", ## args) \
+ X(IDT_SW_PCI_SEFRSTMSK, 0x3EC20, REGDWORD, "Switch Event Fundamental Reset Mask", ## args) \
+ X(IDT_SW_PCI_SEHRSTSTS, 0x3EC24, REGDWORD, "Switch Event Hot Reset Status", ## args) \
+ X(IDT_SW_PCI_SEHRSTMSK, 0x3EC28, REGDWORD, "Switch Event Hot Reset Mask", ## args) \
+ X(IDT_SW_PCI_SEFOVRMSK, 0x3EC2C, REGDWORD, "Switch Event Failover Mask", ## args) \
+ X(IDT_SW_PCI_SEGSIGSTS, 0x3EC30, REGDWORD, "Switch Event Global Signal Status", ## args) \
+ X(IDT_SW_PCI_SEGSIGMSK, 0x3EC34, REGDWORD, "Switch Event Global Signal Mask", ## args) \
+ /* Global Doorbell configuration registers */ \
+ X(IDT_SW_PCI_GDBELLSTS, 0x3EC3C, REGDWORD, "NT Global Doorbell Status", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK0, 0x3ED00, REGDWORD, "NT Global Outbound Doorbell 0 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK1, 0x3ED04, REGDWORD, "NT Global Outbound Doorbell 1 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK2, 0x3ED08, REGDWORD, "NT Global Outbound Doorbell 2 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK3, 0x3ED0C, REGDWORD, "NT Global Outbound Doorbell 3 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK4, 0x3ED10, REGDWORD, "NT Global Outbound Doorbell 4 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK5, 0x3ED14, REGDWORD, "NT Global Outbound Doorbell 5 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK6, 0x3ED18, REGDWORD, "NT Global Outbound Doorbell 6 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK7, 0x3ED1C, REGDWORD, "NT Global Outbound Doorbell 7 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK8, 0x3ED20, REGDWORD, "NT Global Outbound Doorbell 8 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK9, 0x3ED24, REGDWORD, "NT Global Outbound Doorbell 9 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK10, 0x3ED28, REGDWORD, "NT Global Outbound Doorbell 10 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK11, 0x3ED2C, REGDWORD, "NT Global Outbound Doorbell 11 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK12, 0x3ED30, REGDWORD, "NT Global Outbound Doorbell 12 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK13, 0x3ED34, REGDWORD, "NT Global Outbound Doorbell 13 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK14, 0x3ED38, REGDWORD, "NT Global Outbound Doorbell 14 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK15, 0x3ED3C, REGDWORD, "NT Global Outbound Doorbell 15 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK16, 0x3ED40, REGDWORD, "NT Global Outbound Doorbell 16 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK17, 0x3ED44, REGDWORD, "NT Global Outbound Doorbell 17 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK18, 0x3ED48, REGDWORD, "NT Global Outbound Doorbell 18 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK19, 0x3ED4C, REGDWORD, "NT Global Outbound Doorbell 19 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK20, 0x3ED50, REGDWORD, "NT Global Outbound Doorbell 20 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK21, 0x3ED54, REGDWORD, "NT Global Outbound Doorbell 21 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK22, 0x3ED58, REGDWORD, "NT Global Outbound Doorbell 22 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK23, 0x3ED5C, REGDWORD, "NT Global Outbound Doorbell 23 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK24, 0x3ED60, REGDWORD, "NT Global Outbound Doorbell 24 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK25, 0x3ED64, REGDWORD, "NT Global Outbound Doorbell 25 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK26, 0x3ED68, REGDWORD, "NT Global Outbound Doorbell 26 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK27, 0x3ED6C, REGDWORD, "NT Global Outbound Doorbell 27 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK28, 0x3ED70, REGDWORD, "NT Global Outbound Doorbell 28 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK29, 0x3ED74, REGDWORD, "NT Global Outbound Doorbell 29 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK30, 0x3ED78, REGDWORD, "NT Global Outbound Doorbell 30 Mask", ## args) \
+ X(IDT_SW_PCI_GODBELLMSK31, 0x3ED7C, REGDWORD, "NT Global Outbound Doorbell 31 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK0, 0x3ED80, REGDWORD, "NT Global Inbound Doorbell 0 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK1, 0x3ED84, REGDWORD, "NT Global Inbound Doorbell 1 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK2, 0x3ED88, REGDWORD, "NT Global Inbound Doorbell 2 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK3, 0x3ED8C, REGDWORD, "NT Global Inbound Doorbell 3 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK4, 0x3ED90, REGDWORD, "NT Global Inbound Doorbell 4 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK5, 0x3ED94, REGDWORD, "NT Global Inbound Doorbell 5 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK6, 0x3ED98, REGDWORD, "NT Global Inbound Doorbell 6 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK7, 0x3ED9C, REGDWORD, "NT Global Inbound Doorbell 7 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK8, 0x3EDA0, REGDWORD, "NT Global Inbound Doorbell 8 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK9, 0x3EDA4, REGDWORD, "NT Global Inbound Doorbell 9 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK10, 0x3EDA8, REGDWORD, "NT Global Inbound Doorbell 10 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK11, 0x3EDAC, REGDWORD, "NT Global Inbound Doorbell 11 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK12, 0x3EDB0, REGDWORD, "NT Global Inbound Doorbell 12 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK13, 0x3EDB4, REGDWORD, "NT Global Inbound Doorbell 13 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK14, 0x3EDB8, REGDWORD, "NT Global Inbound Doorbell 14 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK15, 0x3EDBC, REGDWORD, "NT Global Inbound Doorbell 15 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK16, 0x3EDC0, REGDWORD, "NT Global Inbound Doorbell 16 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK17, 0x3EDC4, REGDWORD, "NT Global Inbound Doorbell 17 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK18, 0x3EDC8, REGDWORD, "NT Global Inbound Doorbell 18 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK19, 0x3EDCC, REGDWORD, "NT Global Inbound Doorbell 19 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK20, 0x3EDD0, REGDWORD, "NT Global Inbound Doorbell 20 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK21, 0x3EDD4, REGDWORD, "NT Global Inbound Doorbell 21 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK22, 0x3EDD8, REGDWORD, "NT Global Inbound Doorbell 22 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK23, 0x3EDDC, REGDWORD, "NT Global Inbound Doorbell 23 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK24, 0x3EDE0, REGDWORD, "NT Global Inbound Doorbell 24 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK25, 0x3EDE4, REGDWORD, "NT Global Inbound Doorbell 25 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK26, 0x3EDE8, REGDWORD, "NT Global Inbound Doorbell 26 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK27, 0x3EDEC, REGDWORD, "NT Global Inbound Doorbell 27 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK28, 0x3EDF0, REGDWORD, "NT Global Inbound Doorbell 28 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK29, 0x3EDF4, REGDWORD, "NT Global Inbound Doorbell 29 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK30, 0x3EDF8, REGDWORD, "NT Global Inbound Doorbell 30 Mask", ## args) \
+ X(IDT_SW_PCI_GIDBELLMSK31, 0x3EDFC, REGDWORD, "NT Global Inbound Doorbell 31 Mask", ## args) \
+ /* Switch partition messages control (msgs routing table) */ \
+ X(IDT_SW_PCI_SWP0MSGCTL0, 0x3EE00, REGDWORD, "Switch Partition 0 Message Control 0", ## args) \
+ X(IDT_SW_PCI_SWP1MSGCTL0, 0x3EE04, REGDWORD, "Switch Partition 1 Message Control 0", ## args) \
+ X(IDT_SW_PCI_SWP2MSGCTL0, 0x3EE08, REGDWORD, "Switch Partition 2 Message Control 0", ## args) \
+ X(IDT_SW_PCI_SWP3MSGCTL0, 0x3EE0C, REGDWORD, "Switch Partition 3 Message Control 0", ## args) \
+ X(IDT_SW_PCI_SWP4MSGCTL0, 0x3EE10, REGDWORD, "Switch Partition 4 Message Control 0", ## args) \
+ X(IDT_SW_PCI_SWP5MSGCTL0, 0x3EE14, REGDWORD, "Switch Partition 5 Message Control 0", ## args) \
+ X(IDT_SW_PCI_SWP6MSGCTL0, 0x3EE18, REGDWORD, "Switch Partition 6 Message Control 0", ## args) \
+ X(IDT_SW_PCI_SWP7MSGCTL0, 0x3EE1C, REGDWORD, "Switch Partition 7 Message Control 0", ## args) \
+ X(IDT_SW_PCI_SWP0MSGCTL1, 0x3EE20, REGDWORD, "Switch Partition 0 Message Control 1", ## args) \
+ X(IDT_SW_PCI_SWP1MSGCTL1, 0x3EE24, REGDWORD, "Switch Partition 1 Message Control 1", ## args) \
+ X(IDT_SW_PCI_SWP2MSGCTL1, 0x3EE28, REGDWORD, "Switch Partition 2 Message Control 1", ## args) \
+ X(IDT_SW_PCI_SWP3MSGCTL1, 0x3EE2C, REGDWORD, "Switch Partition 3 Message Control 1", ## args) \
+ X(IDT_SW_PCI_SWP4MSGCTL1, 0x3EE30, REGDWORD, "Switch Partition 4 Message Control 1", ## args) \
+ X(IDT_SW_PCI_SWP5MSGCTL1, 0x3EE34, REGDWORD, "Switch Partition 5 Message Control 1", ## args) \
+ X(IDT_SW_PCI_SWP6MSGCTL1, 0x3EE38, REGDWORD, "Switch Partition 6 Message Control 1", ## args) \
+ X(IDT_SW_PCI_SWP7MSGCTL1, 0x3EE3C, REGDWORD, "Switch Partition 7 Message Control 1", ## args) \
+ X(IDT_SW_PCI_SWP0MSGCTL2, 0x3EE40, REGDWORD, "Switch Partition 0 Message Control 2", ## args) \
+ X(IDT_SW_PCI_SWP1MSGCTL2, 0x3EE44, REGDWORD, "Switch Partition 1 Message Control 2", ## args) \
+ X(IDT_SW_PCI_SWP2MSGCTL2, 0x3EE48, REGDWORD, "Switch Partition 2 Message Control 2", ## args) \
+ X(IDT_SW_PCI_SWP3MSGCTL2, 0x3EE4C, REGDWORD, "Switch Partition 3 Message Control 2", ## args) \
+ X(IDT_SW_PCI_SWP4MSGCTL2, 0x3EE50, REGDWORD, "Switch Partition 4 Message Control 2", ## args) \
+ X(IDT_SW_PCI_SWP5MSGCTL2, 0x3EE54, REGDWORD, "Switch Partition 5 Message Control 2", ## args) \
+ X(IDT_SW_PCI_SWP6MSGCTL2, 0x3EE58, REGDWORD, "Switch Partition 6 Message Control 2", ## args) \
+ X(IDT_SW_PCI_SWP7MSGCTL2, 0x3EE5C, REGDWORD, "Switch Partition 7 Message Control 2", ## args) \
+ X(IDT_SW_PCI_SWP0MSGCTL3, 0x3EE60, REGDWORD, "Switch Partition 0 Message Control 3", ## args) \
+ X(IDT_SW_PCI_SWP1MSGCTL3, 0x3EE64, REGDWORD, "Switch Partition 1 Message Control 3", ## args) \
+ X(IDT_SW_PCI_SWP2MSGCTL3, 0x3EE68, REGDWORD, "Switch Partition 2 Message Control 3", ## args) \
+ X(IDT_SW_PCI_SWP3MSGCTL3, 0x3EE6C, REGDWORD, "Switch Partition 3 Message Control 3", ## args) \
+ X(IDT_SW_PCI_SWP4MSGCTL3, 0x3EE70, REGDWORD, "Switch Partition 4 Message Control 3", ## args) \
+ X(IDT_SW_PCI_SWP5MSGCTL3, 0x3EE74, REGDWORD, "Switch Partition 5 Message Control 3", ## args) \
+ X(IDT_SW_PCI_SWP6MSGCTL3, 0x3EE78, REGDWORD, "Switch Partition 6 Message Control 3", ## args) \
+ X(IDT_SW_PCI_SWP7MSGCTL3, 0x3EE7C, REGDWORD, "Switch Partition 7 Message Control 3", ## args) \
+ /* SerDes's control registers */ \
+ X(IDT_SW_PCI_S0CTL, 0x3F000, REGDWORD, "SerDes 0 Control", ## args) \
+ X(IDT_SW_PCI_S0TXLCTL0, 0x3F004, REGDWORD, "SerDes 0 Transmitter Lane Control 0", ## args) \
+ X(IDT_SW_PCI_S0TXLCTL1, 0x3F008, REGDWORD, "SerDes 0 Transmitter Lane Control 1", ## args) \
+ X(IDT_SW_PCI_S0RXEQLCTL, 0x3F010, REGDWORD, "SerDes 0 Receiver Equalization Lane Control", ## args) \
+ X(IDT_SW_PCI_S1CTL, 0x3F020, REGDWORD, "SerDes 1 Control", ## args) \
+ X(IDT_SW_PCI_S1TXLCTL0, 0x3F024, REGDWORD, "SerDes 1 Transmitter Lane Control 0", ## args) \
+ X(IDT_SW_PCI_S1TXLCTL1, 0x3F028, REGDWORD, "SerDes 1 Transmitter Lane Control 1", ## args) \
+ X(IDT_SW_PCI_S1RXEQLCTL, 0x3F030, REGDWORD, "SerDes 1 Receiver Equalization Lane Control", ## args) \
+ X(IDT_SW_PCI_S2CTL, 0x3F040, REGDWORD, "SerDes 2 Control", ## args) \
+ X(IDT_SW_PCI_S2TXLCTL0, 0x3F044, REGDWORD, "SerDes 2 Transmitter Lane Control 0", ## args) \
+ X(IDT_SW_PCI_S2TXLCTL1, 0x3F048, REGDWORD, "SerDes 2 Transmitter Lane Control 1", ## args) \
+ X(IDT_SW_PCI_S2RXEQLCTL, 0x3F050, REGDWORD, "SerDes 2 Receiver Equalization Lane Control", ## args) \
+ X(IDT_SW_PCI_S3CTL, 0x3F060, REGDWORD, "SerDes 3 Control", ## args) \
+ X(IDT_SW_PCI_S3TXLCTL0, 0x3F064, REGDWORD, "SerDes 3 Transmitter Lane Control 0", ## args) \
+ X(IDT_SW_PCI_S3TXLCTL1, 0x3F068, REGDWORD, "SerDes 3 Transmitter Lane Control 1", ## args) \
+ X(IDT_SW_PCI_S3RXEQLCTL, 0x3F070, REGDWORD, "SerDes 3 Receiver Equalization Lane Control", ## args) \
+ X(IDT_SW_PCI_S4CTL, 0x3F080, REGDWORD, "SerDes 4 Control", ## args) \
+ X(IDT_SW_PCI_S4TXLCTL0, 0x3F084, REGDWORD, "SerDes 4 Transmitter Lane Control 0", ## args) \
+ X(IDT_SW_PCI_S4TXLCTL1, 0x3F088, REGDWORD, "SerDes 4 Transmitter Lane Control 1", ## args) \
+ X(IDT_SW_PCI_S4RXEQLCTL, 0x3F090, REGDWORD, "SerDes 4 Receiver Equalization Lane Control", ## args) \
+ X(IDT_SW_PCI_S5CTL, 0x3F0A0, REGDWORD, "SerDes 5 Control", ## args) \
+ X(IDT_SW_PCI_S5TXLCTL0, 0x3F0A4, REGDWORD, "SerDes 5 Transmitter Lane Control 0", ## args) \
+ X(IDT_SW_PCI_S5TXLCTL1, 0x3F0A8, REGDWORD, "SerDes 5 Transmitter Lane Control 1", ## args) \
+ X(IDT_SW_PCI_S5RXEQLCTL, 0x3F0B0, REGDWORD, "SerDes 5 Receiver Equalization Lane Control", ## args) \
+ X(IDT_SW_PCI_S6CTL, 0x3F0C0, REGDWORD, "SerDes 6 Control", ## args) \
+ X(IDT_SW_PCI_S6TXLCTL0, 0x3F0C4, REGDWORD, "SerDes 6 Transmitter Lane Control 0", ## args) \
+ X(IDT_SW_PCI_S6TXLCTL1, 0x3F0C8, REGDWORD, "SerDes 6 Transmitter Lane Control 1", ## args) \
+ X(IDT_SW_PCI_S6RXEQLCTL, 0x3F0D0, REGDWORD, "SerDes 6 Receiver Equalization Lane Control", ## args) \
+ X(IDT_SW_PCI_S7CTL, 0x3F0E0, REGDWORD, "SerDes 7 Control", ## args) \
+ X(IDT_SW_PCI_S7TXLCTL0, 0x3F0E4, REGDWORD, "SerDes 7 Transmitter Lane Control 0", ## args) \
+ X(IDT_SW_PCI_S7TXLCTL1, 0x3F0E8, REGDWORD, "SerDes 7 Transmitter Lane Control 1", ## args) \
+ X(IDT_SW_PCI_S7RXEQLCTL, 0x3F0F0, REGDWORD, "SerDes 7 Receiver Equalization Lane Control", ## args) \
+ /* GPIO/Hot-plug control registers */ \
+ X(IDT_SW_PCI_GPIOFUNC, 0x3F16C, REGDWORD, "General Purpose I/O Function", ## args) \
+ X(IDT_SW_PCI_GPIOAFSEL, 0x3F170, REGDWORD, "General Purpose I/O Alternate Function Select", ## args) \
+ X(IDT_SW_PCI_GPIOCFG, 0x3F174, REGDWORD, "General Purpose I/O Configuration", ## args) \
+ X(IDT_SW_PCI_GPIOD, 0x3F178, REGDWORD, "General Purpose I/O Data", ## args) \
+ X(IDT_SW_PCI_HPCFGCTL, 0x3F17C, REGDWORD, "Hot-Plug Configuration Control", ## args) \
+ /* SMBus related registers */ \
+ X(IDT_SW_PCI_SMBUSSTS, 0x3F188, REGDWORD, "SMBus Status", ## args) \
+ X(IDT_SW_PCI_SMBUSCTL, 0x3F18C, REGDWORD, "SMBus Control", ## args) \
+ X(IDT_SW_PCI_EEPROMINTF, 0x3F190, REGDWORD, "Serial EEPROM Interface", ## args) \
+ /* SMBus IO expanders */ \
+ X(IDT_SW_PCI_IOEXPADDR0, 0x3F198, REGDWORD, "SMBus I/O Expander Address 0", ## args) \
+ X(IDT_SW_PCI_IOEXPADDR1, 0x3F19C, REGDWORD, "SMBus I/O Expander Address 1", ## args) \
+ X(IDT_SW_PCI_IOEXPADDR2, 0x3F1A0, REGDWORD, "SMBus I/O Expander Address 2", ## args) \
+ X(IDT_SW_PCI_IOEXPADDR3, 0x3F1A4, REGDWORD, "SMBus I/O Expander Address 3", ## args) \
+ X(IDT_SW_PCI_IOEXPADDR4, 0x3F1A8, REGDWORD, "SMBus I/O Expander Address 4", ## args) \
+ X(IDT_SW_PCI_IOEXPADDR5, 0x3F1AC, REGDWORD, "SMBus I/O Expander Address 5", ## args) \
+ /* General Purpose Events registers */ \
+ X(IDT_SW_PCI_GPECTL, 0x3F1B0, REGDWORD, "General Purpose Event Control", ## args) \
+ X(IDT_SW_PCI_GPESTS, 0x3F1B4, REGDWORD, "General Purpose Event Status", ## args) \
+ /* Temperature sensor */ \
+ X(IDT_SW_PCI_TMPCTL, 0x3F1D4, REGDWORD, "Temperature Sensor Control", ## args) \
+ X(IDT_SW_PCI_TMPSTS, 0x3F1D8, REGDWORD, "Temperature Sensor Status", ## args) \
+ X(IDT_SW_PCI_TMPALARM, 0x3F1DC, REGDWORD, "Temperature Sensor Alarm", ## args) \
+ X(IDT_SW_PCI_TMPADJ, 0x3F1E0, REGDWORD, "Temperature Sensor Adjustment", ## args) \
+ X(IDT_SW_PCI_TSSLOPE, 0x3F1E4, REGDWORD, "Temperature Sensor Slope", ## args) \
+ /* SMBus Configuration Block header log */ \
+ X(IDT_SW_PCI_SMBUSCBHL, 0x3F1E8, REGDWORD, "SMBus Configuration Block Header Log", ## args)
+
+/*
+ * Enumeration of the IDT PCIe-switch NT registers. It's not actual
+ * addresses or offsets, but the numerated names, which are used to find the
+ * necessary values from the tables above. Consenquently the switch-case
+ * shall help to retrieve all the information for the IO operations. Of course,
+ * we are sure the compiler will translate that statement into the jump table
+ * pattern.
+ *
+ * NOTE 1) The IDT PCIe-switch internal data is littel-endian
+ * so it must be taken into account in the driver
+ * internals.
+ * 2) Additionally the registers should be accessed either
+ * with byte-enables corresponding to their native size or
+ * a size of one DWORD
+ * 3) Global registers registers can be accessed by the
+ * GASAADDR and GASADATA registers of NT-functions only
+ */
+enum idt_ntb_cfgreg {
+ IDT_NT_CFGREGS(PAIR_ID_ENUM)
+ IDT_NTB_CFGREGS_SPLIT,
+ IDT_SW_CFGREGS(PAIR_ID_ENUM)
+ IDT_NTB_CFGREGS_END
+};
+
+/*
+ * IDT PCIe-switch register type. It's vital that the types are assigned
+ * with 0 and 1 since those values are used to determine the registers IO
+ * context
+ * @IDT_NT_REGTYPE: NT-function register accessed using the mmio
+ * @IDT_SW_REGTYPE: IDT PCIe-switch Gobal register accessed using GASA regs
+ */
+enum idt_ntb_regtype {
+ IDT_NT_REGTYPE = 0,
+ IDT_SW_REGTYPE = 1
+};
+
+/*
+ * R/W registers operation context structure
+ * @writereg: Register write function
+ * @readreg: Register read function
+ * @iolock: Spin lock of the registers access
+ */
+struct idt_ntb_regctx {
+ void (*writereg)(void __iomem *cfg_mmio, const ptrdiff_t regoffset,
+ const enum idt_ntb_regsize regsize, const u32 val);
+ u32 (*readreg)(void __iomem *cfg_mmio, const ptrdiff_t regoffset,
+ const enum idt_ntb_regsize regsize);
+ spinlock_t iolock;
+};
+
+#endif /* NTB_HW_IDT_REGMAP_H */
--
2.6.6
Powered by blists - more mailing lists