linux-kernel - Re: [PATCH] genirq/msi: Make sure PCI MSIs are activated early

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <alpine.DEB.2.11.1607281703080.19896@nanos>
Date:	Thu, 28 Jul 2016 17:03:30 +0200 (CEST)
From:	Thomas Gleixner <tglx@...utronix.de>
To:	Bjorn Helgaas <helgaas@...nel.org>
cc:	Marc Zyngier <marc.zyngier@....com>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Bharat Kumar Gogada <bharat.kumar.gogada@...inx.com>,
	linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] genirq/msi: Make sure PCI MSIs are activated early

On Tue, 26 Jul 2016, Thomas Gleixner wrote:
> On Tue, 26 Jul 2016, Thomas Gleixner wrote:
> > On Tue, 26 Jul 2016, Thomas Gleixner wrote:
> > > On Mon, 25 Jul 2016, Bjorn Helgaas wrote:
> > > > On Mon, Jul 25, 2016 at 09:45:13AM +0200, Thomas Gleixner wrote:
> > > > I thought the original issue [1] was that PCI_MSI_FLAGS_ENABLE was being
> > > > written before PCI_MSI_ADDRESS_LO.  That doesn't sound like a good
> > > > idea to me.
> > > 
> > > Well. That's only a problem if the PCI device does not support masking. But
> > > yes, we missed that case back then.
> > >  
> > > > That does seem like a problem.  Maybe it would be better to delay
> > > > setting PCI_MSI_FLAGS_ENABLE until after the MSI address & data bits
> > > > have been set?
> > > 
> > > I thought about that, but that gets ugly pretty fast. Here is an alternative
> > > solution.
> > > 
> > > I think that's the proper place to do it _AFTER_ the hierarchical allocation
> > > took place. On x86 Marc's ACTIVATE_EARLY flag would not work because the
> > > message is not yet ready to be assembled.
> > 
> > Actually it works, because the MSI domain is the last one which is running the
> > allocation function. So everything else is initialized already.
> > 
> > I'll take Marc's patch with some additional commentry as it turned out to be a
> > workaround for the reported VMware issues with PCI/MSI-X pass through.
> 
> Now I digged a little bit deeper into all that PCI/MSI maze.
> 
> When a interrupt is freed, then we write the msi message to 0, but the
> PCI_MSI_FLAGS_ENABLE flag is still set. That makes me wonder ...

Bjorn, any opinion on that?

Thanks,

	tglx