[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1469778503-29193-6-git-send-email-zyw@rock-chips.com>
Date: Fri, 29 Jul 2016 15:48:22 +0800
From: Chris Zhong <zyw@...k-chips.com>
To: dianders@...omium.org, tfiga@...omium.org, heiko@...ech.de,
yzq@...k-chips.com, groeck@...omium.org, myungjoo.ham@...sung.com,
cw00.choi@...sung.com, wulf@...k-chips.com, marcheu@...omium.org
Cc: linux-rockchip@...ts.infradead.org,
Chris Zhong <zyw@...k-chips.com>,
Mark Yao <mark.yao@...k-chips.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [v8 PATCH 5/6] Documentation: bindings: add dt documentation for cdn DP controller
This patch adds a binding that describes the cdn DP controller for
rk3399.
Signed-off-by: Chris Zhong <zyw@...k-chips.com>
Acked-by: Rob Herring <robh@...nel.org>
---
Changes in v8: None
Changes in v7: None
Changes in v6:
- add assigned-clocks and assigned-clock-rates
- add power-domains
Changes in v5: None
Changes in v4:
- add a reset node
- support 2 phys
Changes in v3:
- add SoC specific compatible string
- remove reg = <1>;
Changes in v2: None
Changes in v1:
- add extcon node description
- add #sound-dai-cells description
.../bindings/display/rockchip/cdn-dp-rockchip.txt | 74 ++++++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
diff --git a/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
new file mode 100644
index 0000000..af87dcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
@@ -0,0 +1,74 @@
+Rockchip RK3399 specific extensions to the cdn Display Port
+================================
+
+Required properties:
+- compatible: must be "rockchip,rk3399-cdn-dp"
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+
+- clock-names: from common clock binding:
+ Required elements: "core-clk" "pclk" "spdif"
+
+- resets : a list of phandle + reset specifier pairs
+- reset-names : string reset name, must be:
+ "spdif"
+- power-domains : power-domain property defined with a phandle
+ to respective power domain.
+- assigned-clocks: main clock, should be <&cru SCLK_DP_CORE>
+- assigned-clock-rates : the DP core clk frequency, shall be: 100000000
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: contain a port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ contained 2 endpoints, connecting to the output of vop.
+
+- phys: from general PHY binding: the phandle for the PHY device.
+
+- extcon: extcon specifier for the Power Delivery
+
+- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF
+
+-------------------------------------------------------------------------------
+
+Example:
+ cdn_dp: dp@...00000 {
+ compatible = "rockchip,rk3399-cdn-dp";
+ reg = <0x0 0xfec00000 0x0 0x100000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
+ <&cru SCLK_SPDIF_REC_DPTX>;
+ clock-names = "core-clk", "pclk", "spdif";
+ assigned-clocks = <&cru SCLK_DP_CORE>;
+ assigned-clock-rates = <100000000>;
+ power-domains = <&power RK3399_PD_HDCP>;
+ phys = <&tcphy0>, <&tcphy1>;
+ resets = <&cru SRST_DPTX_SPDIF_REC>;
+ reset-names = "spdif";
+ extcon = <&fusb0>, <&fusb1>;
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dp_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_dp>;
+ };
+
+ dp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_dp>;
+ };
+ };
+ };
+ };
--
2.6.3
Powered by blists - more mailing lists