| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1469797120-29298-1-git-send-email-zajec5@gmail.com>
Date: Fri, 29 Jul 2016 14:58:32 +0200
From: Rafał Miłecki <zajec5@...il.com>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>
Cc: linux-clk@...r.kernel.org, bcm-kernel-feedback-list@...adcom.com,
Rafał Miłecki <rafal@...ecki.pl>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Florian Fainelli <f.fainelli@...il.com>,
Jon Mason <jonmason@...adcom.com>,
Eric Anholt <eric@...olt.net>,
Stephen Warren <swarren@...dotorg.org>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH] clk: bcm: Add driver for Northstar ILP clock
From: Rafał Miłecki <rafal@...ecki.pl>
This clock is present on cheaper Northstar devices like BCM53573 or
BCM47189 using Corex-A7. This driver uses PMU (Power Management Unit)
to calculate clock rate and allows using it in a generic (clk_*) way.
Signed-off-by: Rafał Miłecki <rafal@...ecki.pl>
---
.../devicetree/bindings/clock/brcm,ns-ilp.txt | 28 ++++
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-ns-ilp.c | 146 +++++++++++++++++++++
3 files changed, 175 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt
create mode 100644 drivers/clk/bcm/clk-ns-ilp.c
diff --git a/Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt b/Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt
new file mode 100644
index 0000000..c4df38e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt
@@ -0,0 +1,28 @@
+Broadcom Northstar ILP clock
+============================
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+This binding is used for ILP clock on Broadcom Northstar devices using
+Corex-A7 CPU. ILP clock depends on ALP one and has to be calculated on
+runtime.
+
+Required properties:
+- compatible: "brcm,ns-ilp"
+- reg: iomem address range of PMU (Power Management Unit)
+- reg-names: "pmu", the only needed & supported reg right now
+- clocks: should reference an ALP clock
+- clock-names: "alp", the only needed & supported clock right now
+- #clock-cells: should be <0>
+
+Example:
+
+ilp: ilp {
+ compatible = "brcm,ns-ilp";
+ reg = <0x18012000 0x1000>;
+ reg-names = "pmu";
+ clocks = <&alp>;
+ clock-names = "alp-clk";
+ #clock-cells = <0>;
+};
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 1d79bd2..1389379 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_COMMON_CLK_IPROC) += clk-ns2.o
obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o
obj-$(CONFIG_ARCH_BCM_5301X) += clk-nsp.o
+obj-$(CONFIG_ARCH_BCM_5301X) += clk-ns-ilp.o
diff --git a/drivers/clk/bcm/clk-ns-ilp.c b/drivers/clk/bcm/clk-ns-ilp.c
new file mode 100644
index 0000000..230458e8
--- /dev/null
+++ b/drivers/clk/bcm/clk-ns-ilp.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@...ecki.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#define PMU_XTAL_FREQ_RATIO 0x66c
+#define XTAL_ALP_PER_4ILP 0x00001fff
+#define XTAL_CTL_EN 0x80000000
+#define PMU_SLOW_CLK_PERIOD 0x6dc
+
+struct ns_ilp {
+ struct clk *clk;
+ struct clk_hw hw;
+ struct clk *alp_clk;
+ void __iomem *pmu;
+};
+
+static int ns_ilp_enable(struct clk_hw *hw)
+{
+ struct ns_ilp *ilp = container_of(hw, struct ns_ilp, hw);
+
+ writel(0x10199, ilp->pmu + PMU_SLOW_CLK_PERIOD);
+ writel(0x10000, ilp->pmu + 0x674);
+
+ return 0;
+}
+
+static unsigned long ns_ilp_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct ns_ilp *ilp = container_of(hw, struct ns_ilp, hw);
+ void __iomem *pmu = ilp->pmu;
+ u32 last_val, cur_val;
+ u32 sum = 0, num = 0, loop_num = 0;
+ u32 avg;
+ int err;
+
+ err = clk_prepare_enable(ilp->alp_clk);
+ if (err)
+ return 0;
+
+ /* Enable */
+ writel(XTAL_CTL_EN, pmu + PMU_XTAL_FREQ_RATIO);
+
+ /* Read initial value */
+ last_val = readl(pmu + PMU_XTAL_FREQ_RATIO) & XTAL_ALP_PER_4ILP;
+
+ /* Try getting 20 different values for calculating average */
+ while (num < 20) {
+ cur_val = readl(pmu + PMU_XTAL_FREQ_RATIO) & XTAL_ALP_PER_4ILP;
+
+ if (cur_val != last_val) {
+ /* Got different value, use it */
+ sum += cur_val;
+ num++;
+ loop_num = 0;
+ last_val = cur_val;
+ } else if (++loop_num > 5000) {
+ /* Same value over and over, give up */
+ sum += cur_val;
+ num++;
+ break;
+ }
+ }
+
+ /* Disable */
+ writel(0x0, pmu + PMU_XTAL_FREQ_RATIO);
+
+ avg = sum / num;
+
+ return clk_get_rate(ilp->alp_clk) * 4 / avg;
+}
+
+const struct clk_ops ns_ilp_clk_ops = {
+ .enable = ns_ilp_enable,
+ .recalc_rate = ns_ilp_recalc_rate,
+};
+
+static void ns_ilp_init(struct device_node *np)
+{
+ struct ns_ilp *ilp;
+ struct resource res;
+ struct clk_init_data init = { 0 };
+ int index;
+ int err;
+
+ ilp = kzalloc(sizeof(*ilp), GFP_KERNEL);
+ if (!ilp)
+ return;
+
+ index = of_property_match_string(np, "reg-names", "pmu");
+ if (index < 0) {
+ err = index;
+ goto err_free_ilp;
+ }
+ err = of_address_to_resource(np, index, &res);
+ if (err) {
+ err = index;
+ goto err_free_ilp;
+ }
+ ilp->pmu = ioremap_nocache(res.start, resource_size(&res));
+ if (IS_ERR(ilp->pmu)) {
+ err = PTR_ERR(ilp->pmu);
+ goto err_free_ilp;
+ }
+
+ ilp->alp_clk = of_clk_get_by_name(np, "alp-clk");
+ if (IS_ERR(ilp->alp_clk)) {
+ err = PTR_ERR(ilp->alp_clk);
+ goto err_unmap_pmu;
+ }
+
+ init.name = np->name;
+ init.ops = &ns_ilp_clk_ops;
+ init.flags = CLK_IS_ROOT;
+
+ ilp->hw.init = &init;
+ ilp->clk = clk_register(NULL, &ilp->hw);
+ if (WARN_ON(IS_ERR(ilp->clk)))
+ goto err_put_alp_clk;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, ilp->clk);
+
+ return;
+
+err_put_alp_clk:
+ clk_put(ilp->alp_clk);
+err_unmap_pmu:
+ iounmap(ilp->pmu);
+err_free_ilp:
+ kfree(ilp);
+ pr_err("Failed to init ILP clock: %d\n", err);
+}
+CLK_OF_DECLARE(ns_ilp_clk, "brcm,ns-ilp", ns_ilp_init);
--
1.8.4.5
Powered by blists - more mailing lists