| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160729064951.GA6215@lukather>
Date: Fri, 29 Jul 2016 08:49:51 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Quentin Schulz <quentin.schulz@...e-electrons.com>
Cc: jdelvare@...e.com, linux@...ck-us.net, jic23@...nel.org,
knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net, wens@...e.org,
lee.jones@...aro.org, linux-kernel@...r.kernel.org,
linux-hwmon@...r.kernel.org, linux-iio@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
thomas.petazzoni@...e-electrons.com,
antoine.tenart@...e-electrons.com
Subject: Re: [PATCH v3 2/4] mfd: add support for Allwinner SoCs ADC
Hi Quentin,
On Tue, Jul 26, 2016 at 09:43:45AM +0200, Quentin Schulz wrote:
> The Allwinner SoCs all have an ADC that can also act as a touchscreen
> controller and a thermal sensor. For now, only the ADC and the thermal
> sensor drivers are probed by the MFD, the touchscreen controller support
> will be added later.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@...e-electrons.com>
> ---
>
> v3:
> - use defines in regmap_irq instead of hard coded BITs,
> - use of_device_id data field to chose which MFD cells to add considering
> the compatible responsible of the MFD probe,
> - remove useless initializations,
> - disable all interrupts before adding them to regmap_irqchip,
> - add goto error label in probe,
> - correct wrapping in header license,
> - move defines from IIO driver to header,
> - use GENMASK to limit the size of the variable passed to a macro,
> - prefix register BIT defines with the name of the register,
> - reorder defines,
>
> v2:
> - add license headers,
> - reorder alphabetically includes,
> - add SUNXI_GPADC_ prefixes for defines,
>
> drivers/mfd/Kconfig | 15 +++
> drivers/mfd/Makefile | 2 +
> drivers/mfd/sunxi-gpadc-mfd.c | 189 ++++++++++++++++++++++++++++++++++++
> include/linux/mfd/sunxi-gpadc-mfd.h | 94 ++++++++++++++++++
Renaming the driver would be nice too.
> 4 files changed, 300 insertions(+)
> create mode 100644 drivers/mfd/sunxi-gpadc-mfd.c
> create mode 100644 include/linux/mfd/sunxi-gpadc-mfd.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 1bcf601..6180c2d 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -29,6 +29,21 @@ config MFD_ACT8945A
> linear regulators, along with a complete ActivePath battery
> charger.
>
> +config MFD_SUN4I_GPADC
> + tristate "Allwinner sunxi platforms' GPADC MFD driver"
> + select MFD_CORE
> + select REGMAP_MMIO
> + depends on ARCH_SUNXI || COMPILE_TEST
> + help
> + Select this to get support for Allwinner SoCs (A10, A13 and A31) ADC.
> + This driver will only map the hardware interrupt and registers, you
> + have to select individual drivers based on this MFD to be able to use
> + the ADC or the thermal sensor. This will try to probe the ADC driver
> + sunxi-gpadc-iio and the hwmon driver iio_hwmon.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called sunxi-gpadc-mfd.
> +
> config MFD_AS3711
> bool "AMS AS3711"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 42a66e1..9dfd033 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -205,3 +205,5 @@ intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o
> obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
> +
> +obj-$(CONFIG_MFD_SUN4I_GPADC) += sunxi-gpadc-mfd.o
> diff --git a/drivers/mfd/sunxi-gpadc-mfd.c b/drivers/mfd/sunxi-gpadc-mfd.c
> new file mode 100644
> index 0000000..3d70af0
> --- /dev/null
> +++ b/drivers/mfd/sunxi-gpadc-mfd.c
> @@ -0,0 +1,189 @@
> +/* ADC MFD core driver for sunxi platforms
> + *
> + * Copyright (c) 2016 Quentin Schulz <quentin.schulz@...e-electrons>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/mfd/sunxi-gpadc-mfd.h>
> +
> +static struct resource adc_resources[] = {
> + {
> + .name = "FIFO_DATA_PENDING",
> + .start = SUNXI_IRQ_FIFO_DATA,
> + .end = SUNXI_IRQ_FIFO_DATA,
> + .flags = IORESOURCE_IRQ,
> + }, {
> + .name = "TEMP_DATA_PENDING",
> + .start = SUNXI_IRQ_TEMP_DATA,
> + .end = SUNXI_IRQ_TEMP_DATA,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static const struct regmap_irq sunxi_gpadc_mfd_regmap_irq[] = {
> + REGMAP_IRQ_REG(SUNXI_IRQ_FIFO_DATA, 0,
> + SUNXI_GPADC_TP_INT_FIFOC_TP_DATA_IRQ_EN),
> + REGMAP_IRQ_REG(SUNXI_IRQ_TEMP_DATA, 0,
> + SUNXI_GPADC_TP_INT_FIFOC_TEMP_IRQ_EN),
> +};
> +
> +static const struct regmap_irq_chip sunxi_gpadc_mfd_regmap_irq_chip = {
> + .name = "sunxi_gpadc_mfd_irq_chip",
> + .status_base = SUNXI_GPADC_TP_INT_FIFOS,
> + .ack_base = SUNXI_GPADC_TP_INT_FIFOS,
> + .mask_base = SUNXI_GPADC_TP_INT_FIFOC,
> + .init_ack_masked = true,
> + .mask_invert = true,
> + .irqs = sunxi_gpadc_mfd_regmap_irq,
> + .num_irqs = ARRAY_SIZE(sunxi_gpadc_mfd_regmap_irq),
> + .num_regs = 1,
> +};
> +
> +static struct mfd_cell sun4i_gpadc_mfd_cells[] = {
> + {
> + .name = "sun4i-a10-gpadc-iio",
> + .resources = adc_resources,
> + .num_resources = ARRAY_SIZE(adc_resources),
> + }, {
> + .name = "iio_hwmon",
> + }
> +};
> +
> +static struct mfd_cell sun5i_gpadc_mfd_cells[] = {
> + {
> + .name = "sun5i-a13-gpadc-iio",
> + .resources = adc_resources,
> + .num_resources = ARRAY_SIZE(adc_resources),
> + }, {
> + .name = "iio_hwmon",
> + },
> +};
> +
> +static struct mfd_cell sun6i_gpadc_mfd_cells[] = {
> + {
> + .name = "sun6i-a31-gpadc-iio",
> + .resources = adc_resources,
> + .num_resources = ARRAY_SIZE(adc_resources),
> + }, {
> + .name = "iio_hwmon",
> + },
> +};
> +
> +static const struct regmap_config sunxi_gpadc_mfd_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .fast_io = true,
> +};
> +
> +static const struct of_device_id sunxi_gpadc_mfd_of_match[] = {
> + {
> + .compatible = "allwinner,sun4i-a10-ts",
> + .data = &sun4i_gpadc_mfd_cells,
> + }, {
> + .compatible = "allwinner,sun5i-a13-ts",
> + .data = &sun5i_gpadc_mfd_cells,
> + }, {
> + .compatible = "allwinner,sun6i-a31-ts",
> + .data = &sun6i_gpadc_mfd_cells,
> + }, { /* sentinel */ }
> +};
> +
> +static int sunxi_gpadc_mfd_probe(struct platform_device *pdev)
> +{
> + struct sunxi_gpadc_mfd_dev *mfd_dev;
> + struct resource *mem;
> + const struct of_device_id *of_id;
> + const struct mfd_cell *mfd_cells;
> + unsigned int irq;
> + int ret;
> +
> + of_id = of_match_node(sunxi_gpadc_mfd_of_match, pdev->dev.of_node);
> + if (!of_id)
> + return -EINVAL;
> +
> + mfd_dev = devm_kzalloc(&pdev->dev, sizeof(*mfd_dev), GFP_KERNEL);
> + if (!mfd_dev)
> + return -ENOMEM;
> +
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + mfd_dev->regs = devm_ioremap_resource(&pdev->dev, mem);
> + if (IS_ERR(mfd_dev->regs))
> + return PTR_ERR(mfd_dev->regs);
> +
> + mfd_dev->dev = &pdev->dev;
> + dev_set_drvdata(mfd_dev->dev, mfd_dev);
> +
> + mfd_dev->regmap = devm_regmap_init_mmio(mfd_dev->dev, mfd_dev->regs,
> + &sunxi_gpadc_mfd_regmap_config);
> + if (IS_ERR(mfd_dev->regmap)) {
> + ret = PTR_ERR(mfd_dev->regmap);
> + dev_err(&pdev->dev, "failed to init regmap: %d\n", ret);
> + return ret;
> + }
> +
> + /* Disable all interrupts */
> + regmap_write(mfd_dev->regmap, SUNXI_GPADC_TP_INT_FIFOC, 0);
> +
> + irq = platform_get_irq(pdev, 0);
> + ret = regmap_add_irq_chip(mfd_dev->regmap, irq, IRQF_ONESHOT, 0,
> + &sunxi_gpadc_mfd_regmap_irq_chip,
> + &mfd_dev->regmap_irqc);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to add irq chip: %d\n", ret);
> + return ret;
> + }
> +
> + mfd_cells = of_id->data;
> + ret = mfd_add_devices(mfd_dev->dev, 0, mfd_cells, 2, NULL, 0, NULL);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to add MFD devices: %d\n", ret);
> + goto err;
> + }
> +
> + return 0;
> +err:
> + regmap_del_irq_chip(irq, mfd_dev->regmap_irqc);
> + return ret;
> +}
> +
> +static int sunxi_gpadc_mfd_remove(struct platform_device *pdev)
> +{
> + struct sunxi_gpadc_mfd_dev *mfd_dev;
> + unsigned int irq;
> +
> + irq = platform_get_irq(pdev, 0);
You can store the irq number instead of looking it up twice.
> + mfd_remove_devices(&pdev->dev);
> + mfd_dev = dev_get_drvdata(&pdev->dev);
> + regmap_del_irq_chip(irq, mfd_dev->regmap_irqc);
> +
> + return 0;
> +}
> +
> +MODULE_DEVICE_TABLE(of, sunxi_gpadc_mfd_of_match);
> +
> +static struct platform_driver sunxi_gpadc_mfd_driver = {
> + .driver = {
> + .name = "sunxi-adc-mfd",
> + .of_match_table = of_match_ptr(sunxi_gpadc_mfd_of_match),
> + },
> + .probe = sunxi_gpadc_mfd_probe,
> + .remove = sunxi_gpadc_mfd_remove,
> +};
> +
> +module_platform_driver(sunxi_gpadc_mfd_driver);
> +
> +MODULE_DESCRIPTION("Allwinner sunxi platforms' GPADC MFD core driver");
> +MODULE_AUTHOR("Quentin Schulz <quentin.schulz@...e-electrons.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/sunxi-gpadc-mfd.h b/include/linux/mfd/sunxi-gpadc-mfd.h
> new file mode 100644
> index 0000000..c21abae
> --- /dev/null
> +++ b/include/linux/mfd/sunxi-gpadc-mfd.h
> @@ -0,0 +1,94 @@
> +/* Header of ADC MFD core driver for sunxi platforms
> + *
> + * Copyright (c) 2016 Quentin Schulz <quentin.schulz@...e-electrons>
> + *
> + * This program is free software; you can redistribute it and/or modify it under
> + * the terms of the GNU General Public License version 2 as published by the
> + * Free Software Foundation.
> + */
> +
> +#ifndef __SUNXI_GPADC_MFD__H__
> +#define __SUNXI_GPADC_MFD__H__
> +
> +#define SUNXI_GPADC_TP_CTRL0 0x00
> +
> +#define SUNXI_GPADC_TP_CTRL0_ADC_FIRST_DLY(x) ((GENMASK(7, 0) & (x)) << 24)
> +#define SUNXI_GPADC_TP_CTRL0_ADC_FIRST_DLY_MODE BIT(23)
> +#define SUNXI_GPADC_TP_CTRL0_ADC_CLK_SELECT BIT(22)
> +#define SUNXI_GPADC_TP_CTRL0_ADC_CLK_DIVIDER(x) ((GENMASK(1, 0) & (x)) << 20)
> +#define SUNXI_GPADC_TP_CTRL0_FS_DIV(x) ((GENMASK(3, 0) & (x)) << 16)
> +#define SUNXI_GPADC_TP_CTRL0_T_ACQ(x) (GENMASK(15, 0) & (x))
> +
> +#define SUNXI_GPADC_TP_CTRL1 0x04
Isn't GPADC and TP redundant in your prefix, you seem to be always
using TP, even for non touchscreen related defines...
> +
> +#define SUNXI_GPADC_TP_CTRL1_STYLUS_UP_DEBOUNCE(x) ((GENMASK(7, 0) & (x)) << 12)
> +#define SUNXI_GPADC_TP_CTRL1_STYLUS_UP_DEBOUNCE_EN BIT(9)
> +#define SUNXI_GPADC_TP_CTRL1_TOUCH_PAN_CALI_EN BIT(6)
> +#define SUNXI_GPADC_TP_CTRL1_TP_DUAL_EN BIT(5)
> +#define SUNXI_GPADC_TP_CTRL1_TP_MODE_EN BIT(4)
> +#define SUNXI_GPADC_TP_CTRL1_TP_ADC_SELECT BIT(3)
... sometimes twice ...
> +#define SUNXI_GPADC_TP_CTRL1_ADC_CHAN_SELECT(x) (GENMASK(2, 0) & (x))
> +
> +/* TP_CTRL1 bits for sun6i SOCs */
> +#define SUNXI_GPADC_TP_CTRL1_SUN6I_TOUCH_PAN_CALI_EN BIT(7)
> +#define SUNXI_GPADC_TP_CTRL1_SUN6I_TP_DUAL_EN BIT(6)
> +#define SUNXI_GPADC_TP_CTRL1_SUN6I_TP_MODE_EN BIT(5)
> +#define SUNXI_GPADC_TP_CTRL1_SUN6I_TP_ADC_SELECT BIT(4)
> +#define SUNXI_GPADC_TP_CTRL1_SUN6I_ADC_CHAN_SELECT(x) (GENMASK(3, 0) & BIT(x))
> +
> +#define SUNXI_GPADC_TP_CTRL2 0x08
> +
> +#define SUNXI_GPADC_TP_CTRL2_TP_SENSITIVE_ADJUST(x) ((GENMASK(3, 0) & (x)) << 28)
> +#define SUNXI_GPADC_TP_CTRL2_TP_MODE_SELECT(x) ((GENMASK(1, 0) & (x)) << 26)
> +#define SUNXI_GPADC_TP_CTRL2_PRE_MEA_EN BIT(24)
> +#define SUNXI_GPADC_TP_CTRL2_PRE_MEA_THRE_CNT(x) (GENMASK(23, 0) & (x))
> +
> +#define SUNXI_GPADC_TP_CTRL3 0x0c
> +
> +#define SUNXI_GPADC_TP_CTRL3_FILTER_EN BIT(2)
> +#define SUNXI_GPADC_TP_CTRL3_FILTER_TYPE(x) (GENMASK(1, 0) & (x))
> +
> +#define SUNXI_GPADC_TP_TPR 0x18
> +
> +#define SUNXI_GPADC_TP_TPR_TEMP_ENABLE BIT(16)
> +#define SUNXI_GPADC_TP_TPR_TEMP_PERIOD(x) (GENMASK(15, 0) & (x))
> +
> +#define SUNXI_GPADC_TP_INT_FIFOC 0x10
> +
> +#define SUNXI_GPADC_TP_INT_FIFOC_TEMP_IRQ_EN BIT(18)
> +#define SUNXI_GPADC_TP_INT_FIFOC_TP_OVERRUN_IRQ_EN BIT(17)
> +#define SUNXI_GPADC_TP_INT_FIFOC_TP_DATA_IRQ_EN BIT(16)
> +#define SUNXI_GPADC_TP_INT_FIFOC_TP_DATA_XY_CHANGE BIT(13)
> +#define SUNXI_GPADC_TP_INT_FIFOC_TP_FIFO_TRIG_LEVEL(x) ((GENMASK(4, 0) & (x)) << 8)
> +#define SUNXI_GPADC_TP_INT_FIFOC_TP_DATA_DRQ_EN BIT(7)
> +#define SUNXI_GPADC_TP_INT_FIFOC_TP_FIFO_FLUSH BIT(4)
> +#define SUNXI_GPADC_TP_INT_FIFOC_TP_UP_IRQ_EN BIT(1)
> +#define SUNXI_GPADC_TP_INT_FIFOC_TP_DOWN_IRQ_EN BIT(0)
> +
> +#define SUNXI_GPADC_TP_INT_FIFOS 0x14
> +
> +#define SUNXI_GPADC_TP_INT_FIFOS_TEMP_DATA_PENDING BIT(18)
> +#define SUNXI_GPADC_TP_INT_FIFOS_FIFO_OVERRUN_PENDING BIT(17)
> +#define SUNXI_GPADC_TP_INT_FIFOS_FIFO_DATA_PENDING BIT(16)
> +#define SUNXI_GPADC_TP_INT_FIFOS_TP_IDLE_FLG BIT(2)
> +#define SUNXI_GPADC_TP_INT_FIFOS_TP_UP_PENDING BIT(1)
> +#define SUNXI_GPADC_TP_INT_FIFOS_TP_DOWN_PENDING BIT(0)
> +
> +#define SUNXI_GPADC_TP_CDAT 0x1c
> +#define SUNXI_GPADC_TEMP_DATA 0x20
> +#define SUNXI_GPADC_TP_DATA 0x24
> +
> +#define SUNXI_IRQ_FIFO_DATA 0
> +#define SUNXI_IRQ_TEMP_DATA 1
... and sometimes not at all.
> +
> +/* 10s delay before suspending the IP */
> +#define SUNXI_GPADC_AUTOSUSPEND_DELAY 10000
> +
> +struct sunxi_gpadc_mfd_dev {
> + struct device *dev;
> + struct regmap *regmap;
> + struct regmap_irq_chip_data *regmap_irqc;
> + void __iomem *regs;
> +};
> +
> +#endif
> --
> 2.5.0
>
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)
Powered by blists - more mailing lists