[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAEKpxBn6aC0o7nixq-gjCCwFkAy+sb-hE5DTp5ikm+4LaPfCzw@mail.gmail.com>
Date: Sat, 30 Jul 2016 17:34:11 +0200
From: Code Kipper <codekipper@...il.com>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-sunxi <linux-sunxi@...glegroups.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, linux-kernel@...r.kernel.org,
alsa-devel@...a-project.org,
"Andrea Venturi (pers)" <be17068@...rbole.bo.it>
Subject: Re: [PATCH 1/2] ASoC: sunxi: Add bindings for sun6i to SPDIF
On 30 July 2016 at 17:17, Maxime Ripard
<maxime.ripard@...e-electrons.com> wrote:
> On Sat, Jul 30, 2016 at 04:27:15PM +0200, codekipper@...il.com wrote:
>> From: Marcus Cooper <codekipper@...il.com>
>>
>> The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its
>> reset is controlled via a separate reset controller.
>>
>> Signed-off-by: Marcus Cooper <codekipper@...il.com>
>> ---
>> Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
>> index 13503aa..4fe80f7 100644
>> --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
>> +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
>> @@ -9,6 +9,7 @@ Required properties:
>>
>> - compatible : should be one of the following:
>> - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
>> + - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
>>
>> - reg : Offset and length of the register set for the device.
>>
>> @@ -25,6 +26,8 @@ Required properties:
>> "apb" clock for the spdif bus.
>> "spdif" clock for spdif controller.
>>
>> + - reset : reset specifier for the ahb reset (A31 and newer only)
>
> Isn't it resets ? (plural)
Dohh..yes it is. Do you want me to send an updated patch series, a
single patch change or could I beg for your commit massaging?
Thanks,
CK
>
> Thanks,
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
Powered by blists - more mailing lists