[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1469997882.3998.136.camel@perches.com>
Date: Sun, 31 Jul 2016 13:44:42 -0700
From: Joe Perches <joe@...ches.com>
To: Robert Jarzmik <robert.jarzmik@...e.fr>,
Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Russell King <linux@...linux.org.uk>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] ARM: pxa: fix GPIO double shifts
On Sun, 2016-07-31 at 14:17 +0200, Robert Jarzmik wrote:
> The commit 9bf448c66d4b ("ARM: pxa: use generic gpio operation instead of
> gpio register") from Oct 17, 2011, leads to the following static checker
> warning:
> arch/arm/mach-pxa/spitz_pm.c:172 spitz_charger_wakeup()
> warn: double left shift '!gpio_get_value(SPITZ_GPIO_KEY_INT)
> << (1 << ((SPITZ_GPIO_KEY_INT) & 31))'
>
> As Dan reported, the value is shifted three times :
> - once by gpio_get_value(), which returns either 0 or BIT(gpio)
> - once by the shift operation '<<'
> - a last time by GPIO_bit(gpio) which is BIT(gpio)
>
> Therefore the calculation lead to a chained or operator of :
> - (1 << gpio) << (1 << gpio) = (2^gpio)^gpio = 2 ^ (gpio * gpio)
>
> It is be sheer luck the former statement works, only because each gpio
> used is strictly smaller than 6, and therefore 2^(gpio^2) never
> overflows a 32 bits value, and because it is used as a boolean value to
> check a gpio activation.
>
> As the xxx_charger_wakeup() functions are used as a true/false detection
> mechanism, take that opportunity to change their prototypes from integer
> return value to boolean one.
>
> Fixes: 9bf448c66d4b ("ARM: pxa: use generic gpio operation instead of
> gpio register")
> Reported-by: Dan Carpenter <dan.carpenter@...cle.com>
> Cc: Joe Perches <joe@...ches.com>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@...e.fr>
> ---
> Since v1: replaced binary ORs with logical ORs after assembly comparison
> Since v2: changed charger_wakeup prototype to bool foo()
Thanks Robert
trivially:
> diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
[]
> @@ -131,15 +131,13 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm)
> return is_resume;
> }
>
> -static unsigned long corgi_charger_wakeup(void)
> +static bool corgi_charger_wakeup(void)
> {
> - unsigned long ret;
> + bool ret;
>
> - ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN))
> - | (!gpio_get_value(CORGI_GPIO_KEY_INT)
> - << GPIO_bit(CORGI_GPIO_KEY_INT))
> - | (!gpio_get_value(CORGI_GPIO_WAKEUP)
> - << GPIO_bit(CORGI_GPIO_WAKEUP));
> + ret = !gpio_get_value(CORGI_GPIO_AC_IN)
> + || !gpio_get_value(CORGI_GPIO_KEY_INT)
> + || !gpio_get_value(CORGI_GPIO_WAKEUP);
These might be better without the automatic use of ret
return !gpio_get_value(CORGI_GPIO_AC_IN) ||
!gpio_get_value(CORGI_GPIO_KEY_INT) ||
!gpio_get_value(CORGI_GPIO_WAKEUP);
and
> diff --git a/arch/arm/mach-pxa /spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
[]
> @@ -165,12 +165,12 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
> return is_resume;
> }
>
> -static unsigned long spitz_charger_wakeup(void)
> +static bool spitz_charger_wakeup(void)
> {
> - unsigned long ret;
> - ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
> - << GPIO_bit(SPITZ_GPIO_KEY_INT))
> - | gpio_get_value(SPITZ_GPIO_SYNC));
> + bool ret;
> +
> + ret = !gpio_get_value(SPITZ_GPIO_KEY_INT)
> + || gpio_get_value(SPITZ_GPIO_SYNC);
> return ret;
> }
return !gpio_get_value(SPITZ_GPIO_KEY_INT) ||
gpio_get_value(SPITZ_GPIO_SYNC);
Powered by blists - more mailing lists