| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAMMNwaKO_Ndjrzrh5Bx3k8ek4KOpYX-h6Wh7K=6dSnMMNSnikg@mail.gmail.com>
Date: Mon, 1 Aug 2016 21:21:39 +1000
From: Stephen Backway <stev391@...il.com>
To: linux-media@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH v2] cx23885: Add support for Hauppauge WinTV quadHD ATSC version
Add support fo the Hauppauge WinTV quadHD ATSC version.
IR support has not been provided, all 4 tuners, demodulators etc are working.
Further documentation can be found on Linux TV wiki.
Signed-Off-by: Stephen Backway <stev391@...il.com>
---
v2: Updated to use doc-rst
---
diff --git a/Documentation/media/v4l-drivers/cx23885-cardlist.rst
b/Documentation/media/v4l-drivers/cx23885-cardlist.rst
index ded3b91..d5eb682 100644
--- a/Documentation/media/v4l-drivers/cx23885-cardlist.rst
+++ b/Documentation/media/v4l-drivers/cx23885-cardlist.rst
@@ -60,3 +60,4 @@ cx23885 cards list
54 -> ViewCast 260e [1576:0260]
55 -> ViewCast 460e [1576:0460]
56 -> Hauppauge WinTV-QuadHD-DVB
[0070:6a28,0070:6b28]
+ 57 -> Hauppauge WinTV-quadHD (ATSC)
[0070:6a18,0070:6b18]
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
b/drivers/media/pci/cx23885/cx23885-cards.c
index 4abf50f..99ba8d6 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -770,6 +770,11 @@ struct cx23885_board cx23885_boards[] = {
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC] = {
+ .name = "Hauppauge WinTV-QuadHD-ATSC",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -1073,6 +1078,14 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x0070,
.subdevice = 0x6b28,
.card = CX23885_BOARD_HAUPPAUGE_QUADHD_DVB, /* Tuner Pair 2 */
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6a18,
+ .card = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC, /* Tuner Pair 1 */
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x6b18,
+ .card = CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC, /* Tuner Pair 2 */
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -1278,6 +1291,18 @@ static void hauppauge_eeprom(struct cx23885_dev
*dev, u8 *eeprom_data)
/* WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
DVB-T/T2/C, DVB-T/T2/C */
break;
+ case 165100:
+ /*
+ * WinTV-QuadHD (ATSC) Tuner Pair 1 (PCIe, IR, half height,
+ * ATSC, ATSC
+ */
+ break;
+ case 165101:
+ /*
+ * WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
+ * ATSC, ATSC
+ */
+ break;
default:
printk(KERN_WARNING "%s: warning: "
"unknown hauppauge model #%d\n",
@@ -1751,6 +1776,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
break;
case CX23885_BOARD_HAUPPAUGE_HVR5525:
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
/*
* HVR5525 GPIO Details:
* GPIO-00 IR_WIDE
@@ -1826,6 +1852,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
/* FIXME: Implement me */
break;
case CX23885_BOARD_HAUPPAUGE_HVR1270:
@@ -2025,6 +2052,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
case CX23885_BOARD_HAUPPAUGE_HVR5525:
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xc0);
break;
@@ -2171,6 +2199,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c
b/drivers/media/pci/cx23885/cx23885-dvb.c
index e5748a9..c5daa23 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -74,6 +74,7 @@
#include "sp2.h"
#include "m88ds3103.h"
#include "m88rs6000t.h"
+#include "lgdt3306a.h"
static unsigned int debug;
@@ -574,6 +575,30 @@ static struct stb6100_config prof_8000_stb6100_config = {
.refclock = 27000000,
};
+static struct lgdt3306a_config hauppauge_quadHD_ATSC_a_config = {
+ .i2c_addr = 0x59,
+ .qam_if_khz = 4000,
+ .vsb_if_khz = 3250,
+ .deny_i2c_rptr = 1, /* Disabled */
+ .spectral_inversion = 0, /* Disabled */
+ .mpeg_mode = LGDT3306A_MPEG_SERIAL,
+ .tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE,
+ .tpvalid_polarity = LGDT3306A_TP_VALID_HIGH,
+ .xtalMHz = 25, /* 24 or 25 */
+};
+
+static struct lgdt3306a_config hauppauge_quadHD_ATSC_b_config = {
+ .i2c_addr = 0x0e,
+ .qam_if_khz = 4000,
+ .vsb_if_khz = 3250,
+ .deny_i2c_rptr = 1, /* Disabled */
+ .spectral_inversion = 0, /* Disabled */
+ .mpeg_mode = LGDT3306A_MPEG_SERIAL,
+ .tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE,
+ .tpvalid_polarity = LGDT3306A_TP_VALID_HIGH,
+ .xtalMHz = 25, /* 24 or 25 */
+};
+
static int p8000_set_voltage(struct dvb_frontend *fe,
enum fe_sec_voltage voltage)
{
@@ -2365,6 +2390,81 @@ static int dvb_register(struct cx23885_tsport *port)
break;
}
break;
+ case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:
+ switch (port->nr) {
+ /* port b - Terrestrial/cable */
+ case 1:
+ /* attach frontend */
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,
+ &hauppauge_quadHD_ATSC_a_config, &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend == NULL)
+ break;
+
+ /* attach tuner */
+ memset(&si2157_config, 0, sizeof(si2157_config));
+ si2157_config.fe = fe0->dvb.frontend;
+ si2157_config.if_port = 1;
+ si2157_config.inversion = 1;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &si2157_config;
+ request_module("%s", info.type);
+ client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
+ if (!client_tuner || !client_tuner->dev.driver) {
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ port->i2c_client_demod = NULL;
+ goto frontend_detach;
+ }
+ if (!try_module_get(client_tuner->dev.driver->owner)) {
+ i2c_unregister_device(client_tuner);
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ port->i2c_client_demod = NULL;
+ goto frontend_detach;
+ }
+ port->i2c_client_tuner = client_tuner;
+ break;
+
+ /* port c - terrestrial/cable */
+ case 2:
+ /* attach frontend */
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,
+ &hauppauge_quadHD_ATSC_b_config, &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend == NULL)
+ break;
+
+ /* attach tuner */
+ memset(&si2157_config, 0, sizeof(si2157_config));
+ si2157_config.fe = fe0->dvb.frontend;
+ si2157_config.if_port = 1;
+ si2157_config.inversion = 1;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+ info.addr = 0x62;
+ info.platform_data = &si2157_config;
+ request_module("%s", info.type);
+ client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
+ if (!client_tuner || !client_tuner->dev.driver) {
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ port->i2c_client_demod = NULL;
+ goto frontend_detach;
+ }
+ if (!try_module_get(client_tuner->dev.driver->owner)) {
+ i2c_unregister_device(client_tuner);
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ port->i2c_client_demod = NULL;
+ goto frontend_detach;
+ }
+ port->i2c_client_tuner = client_tuner;
+ break;
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
diff --git a/drivers/media/pci/cx23885/cx23885.h
b/drivers/media/pci/cx23885/cx23885.h
index 24a0a6c..2ebece9 100644
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -103,7 +103,8 @@
#define CX23885_BOARD_HAUPPAUGE_STARBURST 53
#define CX23885_BOARD_VIEWCAST_260E 54
#define CX23885_BOARD_VIEWCAST_460E 55
-#define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB 56
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB 56
+#define CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC 57
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
Powered by blists - more mailing lists