[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160801114801.GM4329@intel.com>
Date: Mon, 1 Aug 2016 14:48:01 +0300
From: Ville Syrjälä <ville.syrjala@...ux.intel.com>
To: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>
Cc: Matt Roper <matthew.d.roper@...el.com>, Lyude <cpaul@...hat.com>,
intel-gfx@...ts.freedesktop.org, David Airlie <airlied@...ux.ie>,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
Daniel Vetter <daniel.vetter@...el.com>
Subject: Re: [Intel-gfx] [PATCH v4 0/6] Finally fix watermarks
On Mon, Aug 01, 2016 at 10:48:37AM +0200, Maarten Lankhorst wrote:
> Op 29-07-16 om 22:33 schreef Matt Roper:
> > On Fri, Jul 29, 2016 at 12:39:05PM +0300, Ville Syrjälä wrote:
> >> On Thu, Jul 28, 2016 at 05:03:52PM -0700, Matt Roper wrote:
> >>> This is completely untested (and probably horribly broken/buggy), but
> >>> here's a quick mockup of the general approach I was thinking for
> >>> ensuring DDB & WM's can be updated together while ensuring the
> >>> three-step pipe flushing process is honored:
> >>>
> >>> https://github.com/mattrope/kernel/commits/experimental/lyude_ddb
> >>>
> >>> Basically the idea is to take note of what's happening to the pipe's DDB
> >>> allocation (shrinking, growing, unchanged, etc.) during the atomic check
> >>> phase;
> >> Didn't look too closely, but I think you can't actually do that unless
> >> you lock all the crtcs whenever the number of active pipes is goind to
> >> change. Meaning we'd essentially be back to the one-big-modeset-lock
> >> apporach, which will cause missed flips and whanot on the other pipes.
> >>
> >> The alternative I think would consist of:
> >> - make sure level 0 watermark never exceeds total_ddb_size/max_pipes,
> >> so that a modeset doesn't have to care about the wms for the other
> >> pipes not fitting in
> > Unfortunately this part is the problem. You might get away with doing
> > this on SKL/KBL which only have three planes max per pipe and a large
> > (896 block) DDB, but on BXT you have up to four planes (we don't
> > actually enable the topmost plane in a full-featured manner just yet,
> > but need to soon), yet the total DDB is only 512 blocks. Sadly, the
> > platform with more planes was given a smaller DDB... :-(
> > We're already in trouble because users that are running setups like 3x
> > 4K with most/all planes in use at large sizes can't find level 0
> > watermarks that satisfy their needs and we have to reject the whole
> > configuration. If we further limit each pipe's usage to total/maxpipes
> > (i.e., 170 blocks per pipe on BXT), then we're going to hit similar
> > issues when only driving one or two displays with with all of the planes
> > in use, even though we should have had more DDB space to work with.
> >
> > I guess serious plane usage isn't too common in desktop setups today,
> > but it's a very critical feature in the embedded world; we can't really
> > afford to cripple plane usage further. Unfortunately, as you point out
> > above, this means that we have to follow the bspec's DDB allocation
> > method, which in turn means we need to grab _all_ CRTC locks any time
> > _any_ CRTC is being turned on or turned off which is a BKL-style way of
> > doing things.
> Meh, I'm running into a similar issue on vlv/chv. I don't see a way around it. :(
Now are you hitting it w/ vlv/chv? They don't even have a shared DDB.
> Only thing we could do is split up the state to make the non-modeset
> crtc's complete early.
--
Ville Syrjälä
Intel OTC
Powered by blists - more mailing lists