| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1470153381-20517-3-git-send-email-tthayer@opensource.altera.com>
Date: Tue, 2 Aug 2016 10:56:20 -0500
From: <tthayer@...nsource.altera.com>
To: <bp@...en8.de>, <dougthompson@...ssion.com>,
<m.chehab@...sung.com>, <robh+dt@...nel.org>, <pawel.moll@....com>,
<mark.rutland@....com>, <ijc+devicetree@...lion.org.uk>,
<galak@...eaurora.org>, <linux@....linux.org.uk>,
<dinguyen@...nsource.altera.com>, <grant.likely@...aro.org>
CC: <devicetree@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<linux-edac@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <tthayer.linux@...il.com>,
<tthayer@...nsource.altera.com>
Subject: [PATCH 2/3] EDAC, altera: Add Arria10 SD-MMC EDAC support
From: Thor Thayer <tthayer@...nsource.altera.com>
Add Altera Arria10 SD-MMC FIFO memory EDAC support. The SD-MMC
is a dual port RAM implementation which is different than any
of the other peripherals and therefore requires additional code.
Signed-off-by: Thor Thayer <tthayer@...nsource.altera.com>
---
drivers/edac/Kconfig | 7 ++
drivers/edac/altera_edac.c | 188 +++++++++++++++++++++++++++++++++++++++++++-
drivers/edac/altera_edac.h | 5 ++
3 files changed, 199 insertions(+), 1 deletion(-)
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 72752f4..394cd16 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -426,6 +426,13 @@ config EDAC_ALTERA_QSPI
Support for error detection and correction on the
Altera QSPI FIFO Memory for Altera SoCs.
+config EDAC_ALTERA_SDMMC
+ bool "Altera SDMMC FIFO ECC"
+ depends on EDAC_ALTERA=y && MMC_DW
+ help
+ Support for error detection and correction on the
+ Altera SDMMC FIFO Memory for Altera SoCs.
+
config EDAC_SYNOPSYS
tristate "Synopsys DDR Memory Controller"
depends on EDAC_MM_EDAC && ARCH_ZYNQ
diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 28247f8..8b5177e 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1393,6 +1393,188 @@ early_initcall(socfpga_init_qspi_ecc);
#endif /* CONFIG_EDAC_ALTERA_QSPI */
+/********************* SDMMC Device Functions **********************/
+
+#ifdef CONFIG_EDAC_ALTERA_SDMMC
+
+static const struct edac_device_prv_data a10_sdmmceccb_data;
+static int altr_portb_setup(struct altr_edac_device_dev *device)
+{
+ struct edac_device_ctl_info *dci;
+ struct altr_edac_device_dev *altdev;
+ char *ecc_name = "sdmmcb-ecc";
+ int edac_idx, rc;
+ struct device_node *np;
+ const struct edac_device_prv_data *prv = &a10_sdmmceccb_data;
+
+ rc = altr_check_ecc_deps(device);
+ if (rc)
+ return rc;
+
+ /* Create the PortB EDAC device */
+ edac_idx = edac_device_alloc_index();
+ dci = edac_device_alloc_ctl_info(sizeof(*altdev), ecc_name, 1,
+ ecc_name, 1, 0, NULL, 0, edac_idx);
+ if (!dci) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "%s: Unable to allocate PortB EDAC device\n",
+ ecc_name);
+ return -ENOMEM;
+ }
+
+ /* Initialize the PortB EDAC device structure from PortA structure */
+ altdev = dci->pvt_info;
+ *altdev = *device;
+
+ if (!devres_open_group(&altdev->ddev, altr_portb_setup, GFP_KERNEL))
+ return -ENOMEM;
+
+ /* Update PortB specific values */
+ altdev->edac_dev_name = ecc_name;
+ altdev->edac_idx = edac_idx;
+ altdev->edac_dev = dci;
+ altdev->data = prv;
+ dci->dev = &altdev->ddev;
+ dci->ctl_name = "Altera ECC Manager";
+ dci->mod_name = ecc_name;
+ dci->dev_name = ecc_name;
+
+ /* Find the SD/MMC device tree Node then update the IRQs for PortB */
+ np = of_find_compatible_node(NULL, NULL, "altr,socfpga-sdmmc-ecc");
+ if (!np) {
+ rc = -ENODEV;
+ goto err_release_group_1;
+ }
+
+ altdev->sb_irq = irq_of_parse_and_map(np, 2);
+ if (!altdev->sb_irq) {
+ edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB SBIRQ alloc\n");
+ rc = -ENODEV;
+ goto err_release_group_1;
+ }
+ rc = devm_request_irq(&altdev->ddev, altdev->sb_irq,
+ prv->ecc_irq_handler,
+ IRQF_SHARED, ecc_name, altdev);
+ if (rc) {
+ edac_printk(KERN_ERR, EDAC_DEVICE, "PortB SBERR IRQ error\n");
+ goto err_release_group_1;
+ }
+
+ altdev->db_irq = irq_of_parse_and_map(np, 3);
+ if (!altdev->db_irq) {
+ edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
+ rc = -ENODEV;
+ goto err_release_group_1;
+ }
+ rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
+ prv->ecc_irq_handler,
+ IRQF_SHARED, ecc_name, altdev);
+ if (rc) {
+ edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
+ goto err_release_group_1;
+ }
+
+ rc = edac_device_add_device(dci);
+ if (rc) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "edac_device_add_device portB failed\n");
+ rc = -ENOMEM;
+ goto err_release_group_1;
+ }
+ altr_create_edacdev_dbgfs(dci, prv);
+
+ list_add(&altdev->next, &altdev->edac->a10_ecc_devices);
+
+ devres_remove_group(&altdev->ddev, altr_portb_setup);
+
+ return 0;
+
+err_release_group_1:
+ edac_device_free_ctl_info(dci);
+ devres_release_group(&altdev->ddev, altr_portb_setup);
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "%s:Error setting up EDAC device: %d\n", ecc_name, rc);
+ return rc;
+}
+
+static irqreturn_t altr_edac_a10_ecc_irq_portb(int irq, void *dev_id)
+{
+ struct altr_edac_device_dev *ad = dev_id;
+ void __iomem *base = ad->base;
+ const struct edac_device_prv_data *priv = ad->data;
+
+ if (irq == ad->sb_irq) {
+ writel(priv->ce_clear_mask,
+ base + ALTR_A10_ECC_INTSTAT_OFST);
+ edac_device_handle_ce(ad->edac_dev, 0, 0, ad->edac_dev_name);
+ return IRQ_HANDLED;
+ } else if (irq == ad->db_irq) {
+ writel(priv->ue_clear_mask,
+ base + ALTR_A10_ECC_INTSTAT_OFST);
+ edac_device_handle_ue(ad->edac_dev, 0, 0, ad->edac_dev_name);
+ return IRQ_HANDLED;
+ }
+
+ WARN_ON(1);
+
+ return IRQ_NONE;
+}
+
+static const struct edac_device_prv_data a10_sdmmcecca_data = {
+ .setup = altr_portb_setup,
+ .ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+ .ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+ .dbgfs_name = "altr_trigger",
+ .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+ .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+ .ce_set_mask = ALTR_A10_ECC_SERRPENA,
+ .ue_set_mask = ALTR_A10_ECC_DERRPENA,
+ .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+ .ecc_irq_handler = altr_edac_a10_ecc_irq,
+ .inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+static const struct edac_device_prv_data a10_sdmmceccb_data = {
+ .setup = altr_portb_setup,
+ .ce_clear_mask = ALTR_A10_ECC_SERRPENB,
+ .ue_clear_mask = ALTR_A10_ECC_DERRPENB,
+ .dbgfs_name = "altr_trigger",
+ .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+ .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+ .ce_set_mask = ALTR_A10_ECC_TSERRB,
+ .ue_set_mask = ALTR_A10_ECC_TDERRB,
+ .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+ .ecc_irq_handler = altr_edac_a10_ecc_irq_portb,
+ .inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+static int __init socfpga_init_sdmmc_ecc(void)
+{
+ int rc = -ENODEV;
+ struct device_node *child = of_find_compatible_node(NULL, NULL,
+ "altr,socfpga-sdmmc-ecc");
+ if (!child) {
+ edac_printk(KERN_ERR, EDAC_DEVICE, "SDMMC node not found\n");
+ return -ENODEV;
+ }
+
+ if (!of_device_is_available(child))
+ goto exit;
+
+ if (validate_parent_available(child))
+ goto exit;
+
+ rc = altr_init_a10_ecc_block(child, ALTR_A10_SDMMC_IRQ_MASK,
+ a10_sdmmcecca_data.ecc_enable_mask, 1);
+exit:
+ of_node_put(child);
+ return rc;
+}
+
+early_initcall(socfpga_init_sdmmc_ecc);
+
+#endif /* CONFIG_EDAC_ALTERA_SDMMC */
+
/********************* Arria10 EDAC Device Functions *************************/
static const struct of_device_id altr_edac_a10_device_of_match[] = {
#ifdef CONFIG_EDAC_ALTERA_L2C
@@ -1418,6 +1600,9 @@ static const struct of_device_id altr_edac_a10_device_of_match[] = {
#ifdef CONFIG_EDAC_ALTERA_QSPI
{ .compatible = "altr,socfpga-qspi-ecc", .data = &a10_qspiecc_data },
#endif
+#ifdef CONFIG_EDAC_ALTERA_SDMMC
+ { .compatible = "altr,socfpga-sdmmc-ecc", .data = &a10_sdmmcecca_data },
+#endif
{},
};
MODULE_DEVICE_TABLE(of, altr_edac_a10_device_of_match);
@@ -1711,7 +1896,8 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
of_device_is_compatible(child, "altr,socfpga-nand-ecc") ||
of_device_is_compatible(child, "altr,socfpga-dma-ecc") ||
of_device_is_compatible(child, "altr,socfpga-usb-ecc") ||
- of_device_is_compatible(child, "altr,socfpga-qspi-ecc"))
+ of_device_is_compatible(child, "altr,socfpga-qspi-ecc") ||
+ of_device_is_compatible(child, "altr,socfpga-sdmmc-ecc"))
altr_edac_a10_device_add(edac, child);
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index 687d8e7..cf3a68b 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -250,6 +250,8 @@ struct altr_sdram_mc_data {
#define ALTR_A10_ECC_INTTEST_OFST 0x24
#define ALTR_A10_ECC_TSERRA BIT(0)
#define ALTR_A10_ECC_TDERRA BIT(8)
+#define ALTR_A10_ECC_TSERRB BIT(16)
+#define ALTR_A10_ECC_TDERRB BIT(24)
/* ECC Manager Defines */
#define A10_SYSMGR_ECC_INTMASK_SET_OFST 0x94
@@ -288,6 +290,9 @@ struct altr_sdram_mc_data {
/* Arria 10 Ethernet ECC Management Group Defines */
#define ALTR_A10_COMMON_ECC_EN_CTL BIT(0)
+/* Arria 10 SDMMC ECC Management Group Defines */
+#define ALTR_A10_SDMMC_IRQ_MASK (BIT(16) | BIT(15))
+
/* A10 ECC Controller memory initialization timeout */
#define ALTR_A10_ECC_INIT_WATCHDOG_10US 10000
--
1.7.9.5
Powered by blists - more mailing lists