linux-kernel - [PATCH v4 3/6] binding-doc: usb: usb-device: add optional properties for power sequence

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1470108652-16812-4-git-send-email-peter.chen@nxp.com>
Date:	Tue, 2 Aug 2016 11:30:49 +0800
From:	Peter Chen <peter.chen@....com>
To:	<gregkh@...uxfoundation.org>, <stern@...land.harvard.edu>,
	<ulf.hansson@...aro.org>, <broonie@...nel.org>, <sre@...nel.org>,
	<robh+dt@...nel.org>, <shawnguo@...nel.org>,
	<dbaryshkov@...il.com>, <dwmw3@...radead.org>
CC:	<k.kozlowski@...sung.com>, <linux-arm-kernel@...ts.infradead.org>,
	<p.zabel@...gutronix.de>, <devicetree@...r.kernel.org>,
	<pawel.moll@....com>, <mark.rutland@....com>,
	<linux-usb@...r.kernel.org>, <arnd@...db.de>,
	<s.hauer@...gutronix.de>, <mail@...iej.szmigiero.name>,
	<troy.kisky@...ndarydevices.com>, <festevam@...il.com>,
	<oscar@...andei.net>, <stephen.boyd@...aro.org>,
	<linux-pm@...r.kernel.org>, <stillcompiling@...il.com>,
	<linux-kernel@...r.kernel.org>, <mka@...omium.org>,
	Peter Chen <peter.chen@....com>
Subject: [PATCH v4 3/6] binding-doc: usb: usb-device: add optional properties for power sequence

Add optional properties for power sequence.

Signed-off-by: Peter Chen <peter.chen@....com>
Acked-by: Rob Herring <robh@...nel.org>
---
 Documentation/devicetree/bindings/usb/usb-device.txt | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
index 1c35e7b..3661dd2 100644
--- a/Documentation/devicetree/bindings/usb/usb-device.txt
+++ b/Documentation/devicetree/bindings/usb/usb-device.txt
@@ -13,6 +13,10 @@ Required properties:
 - reg: the port number which this device is connecting to, the range
   is 1-31.
 
+Optional properties:
+power sequence properties, see
+Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt for detail
+
 Example:
 
 &usb1 {
@@ -21,8 +25,12 @@ Example:
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	hub: genesys@1 {
+	genesys: hub@1 {
 		compatible = "usb5e3,608";
 		reg = <1>;
+
+		clocks = <&clks IMX6SX_CLK_CKO>;
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */
+		reset-duration-us = <10>;
 	};
 }
-- 
1.9.1