linux-kernel - [PATCH 2/2] gpio: dt-bindings: add brcm,bcm6345-gpio bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1470222135-4731-2-git-send-email-noltari@gmail.com>
Date:	Wed,  3 Aug 2016 13:02:15 +0200
From:	Álvaro Fernández Rojas 
	<noltari@...il.com>
To:	linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:	linus.walleij@...aro.org, gnurou@...il.com,
	chunkeey@...glemail.com,
	Álvaro Fernández Rojas 
	<noltari@...il.com>
Subject: [PATCH 2/2] gpio: dt-bindings: add brcm,bcm6345-gpio bindings

This patch adds the device tree bindings for the Broadcom's BCM6345
memory-mapped GPIO controllers.

The gpios will be supported by gpio-mmio code of the
GPIO generic library.

Signed-off-by: Álvaro Fernández Rojas <noltari@...il.com>
---
 .../devicetree/bindings/gpio/brcm,bcm6345-gpio.txt | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt

diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
new file mode 100644
index 0000000..48e35ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
@@ -0,0 +1,46 @@
+Bindings for the Broadcom's brcm,bcm6345-gpio memory-mapped GPIO controllers.
+
+These bindings should only be used for BCM6338 and BCM6345 SoCs, since newer
+ones need a proper pinctrl driver.
+BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
+and/or written, and the direction changed from input to output.
+BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
+and/or written, and the direction changed from input to output.
+
+Required properties:
+	- compatible: should be "brcm,bcm6345-gpio"
+	- reg-names: must contain
+		"dat" - data register
+		"dirout" - direction (output) register
+	- reg: address + size pairs describing the GPIO register sets;
+		order must correspond with the order of entries in reg-names
+	- #gpio-cells: must be set to 2. The first cell is the pin number and
+			the second cell is used to specify the gpio polarity:
+			0 = active high
+			1 = active low
+	- gpio-controller: Marks the device node as a gpio controller.
+
+Optional properties:
+	- big-endian: Memory is big endian.
+
+Examples:
+	- BCM6338:
+	gpio0: gpio-controller@...e0407 {
+		compatible = "brcm,bcm6345-gpio";
+		reg-names = "dirout", "dat";
+		reg = <0xfffe0407 1>, <0xfffe040f 1>;
+
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	- BCM6345:
+	gpio0: gpio-controller@...e0406 {
+		compatible = "brcm,bcm6345-gpio";
+		reg-names = "dirout", "dat";
+		reg = <0xfffe0406 2>, <0xfffe040a 2>;
+		big-endian;
+
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
-- 
2.1.4