linux-kernel - [PATCH v2 2/2] gpio: mmio: add brcm,bcm6345 support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1470225957-5692-2-git-send-email-noltari@gmail.com>
Date:	Wed,  3 Aug 2016 14:05:57 +0200
From:	Álvaro Fernández Rojas 
	<noltari@...il.com>
To:	linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:	linus.walleij@...aro.org, gnurou@...il.com,
	chunkeey@...glemail.com,
	Álvaro Fernández Rojas 
	<noltari@...il.com>
Subject: [PATCH v2 2/2] gpio: mmio: add brcm,bcm6345 support

From: Christian Lamparter <chunkeey@...glemail.com>

This patch adds support for the GPIO found in Broadcom's bcm63xx-gpio
chips.
This GPIO controller is used in the following Broadcom SoCs: BCM6338, BCM6345.
It can be used in newer SoCs, without the capability of pin multiplexing.

Signed-off-by: Christian Lamparter <chunkeey@...glemail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@...il.com>
---
 v2: fix build

 drivers/gpio/gpio-mmio.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpio/gpio-mmio.c b/drivers/gpio/gpio-mmio.c
index 6ec144b..d7d03ad 100644
--- a/drivers/gpio/gpio-mmio.c
+++ b/drivers/gpio/gpio-mmio.c
@@ -573,6 +573,7 @@ static void __iomem *bgpio_map(struct platform_device *pdev,
 
 #ifdef CONFIG_OF
 static const struct of_device_id bgpio_of_match[] = {
+	{ .compatible = "brcm,bcm6345-gpio" },
 	{ .compatible = "wd,mbl-gpio" },
 	{ }
 };
@@ -593,6 +594,9 @@ static struct bgpio_pdata *bgpio_parse_dt(struct platform_device *pdev,
 
 	pdata->base = -1;
 
+	if (of_device_is_big_endian(pdev->dev.of_node))
+		*flags |= BGPIOF_BIG_ENDIAN_BYTE_ORDER;
+
 	if (of_property_read_bool(pdev->dev.of_node, "no-output"))
 		*flags |= BGPIOF_NO_OUTPUT;
 
-- 
2.1.4