linux-kernel - [PATCH 02/11] ARM: dts: NSP: Enable SATA and add i2c devices on XMC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed,  3 Aug 2016 14:38:57 -0400
From:	Jon Mason <jon.mason@...adcom.com>
To:	f.fainelli@...il.com
Cc:	Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>, Ray Jui <rjui@...adcom.com>,
	Scott Branden <sbranden@...adcom.com>,
	bcm-kernel-feedback-list@...adcom.com,
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 02/11] ARM: dts: NSP: Enable SATA and add i2c devices on XMC

Enable SATA on bcm958625xmc and add the i2c devices present.

Signed-off-by: Jon Mason <jon.mason@...adcom.com>
---
 arch/arm/boot/dts/bcm958525xmc.dts | 32 +++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index d257e83..a337f2d 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -47,6 +47,24 @@
 	};
 };
 
+&i2c0 {
+	temperature-sensor@4c {
+		compatible = "adi,adt7461a";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "st,m41t81";
+		reg = <0x68>;
+	};
+};
+
 &nand {
 	nandcs@0 {
 		compatible = "brcm,nandcs";
@@ -85,7 +103,7 @@
 	};
 };
 
-/* XHCI, SATA, MMC, and Ethernet support needed to be complete */
+/* XHCI, MMC, and Ethernet support needed to be complete */
 
 &uart0 {
 	status = "okay";
@@ -99,6 +117,18 @@
 	status = "okay";
 };
 
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
 &pinctrl {
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_sel>;
-- 
2.7.4