linux-kernel - [PATCH 05/11] ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1470249546-12440-6-git-send-email-jon.mason@broadcom.com>
Date:	Wed,  3 Aug 2016 14:39:00 -0400
From:	Jon Mason <jon.mason@...adcom.com>
To:	f.fainelli@...il.com
Cc:	Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>, Ray Jui <rjui@...adcom.com>,
	Scott Branden <sbranden@...adcom.com>,
	bcm-kernel-feedback-list@...adcom.com,
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 05/11] ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file

Add the ability to reboot the bcm958625hr board via GPIO.
Unfortunately, not all of the NSP based boards use the same GPIO pin and
one doesn't have the ability to reboot via GPIO at all.  So, this will
need to be specified per DTS file.

Signed-off-by: Jon Mason <jon.mason@...adcom.com>
---
 arch/arm/boot/dts/bcm958625hr.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 78970b9..d72baf7 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -33,6 +33,7 @@
 /dts-v1/;
 
 #include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "NorthStar Plus SVK (BCM958625HR)";
@@ -49,6 +50,12 @@
 	memory {
 		reg = <0x60000000 0x20000000>;
 	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
 };
 
 &nand {
-- 
2.7.4