linux-kernel - [PATCH v2 1/2] Allowing UART DMA to be configured on i.MX53

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1470306157-11181-1-git-send-email-fabien.lahoudere@collabora.co.uk>
Date:	Thu,  4 Aug 2016 12:22:36 +0200
From:	Fabien Lahoudere <fabien.lahoudere@...labora.co.uk>
To:	unlisted-recipients:; (no To-header on input)
Cc:	Martyn Welch <martyn.welch@...labora.co.uk>,
	Fabien Lahoudere <fabien.lahoudere@...labora.co.uk>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Jiri Slaby <jslaby@...e.com>,
	linux-serial@...r.kernel.org (open list:SERIAL DRIVERS),
	linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v2 1/2] Allowing UART DMA to be configured on i.MX53

From: Martyn Welch <martyn.welch@...labora.co.uk>

The UART DMA was only being configured on i.MX6Q compatible devices. We
know that the DMA also works for i.MX53 devices, so allow DMA to be
configured on those devices too.

Signed-off-by: Martyn Welch <martyn.welch@...labora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@...labora.co.uk>
---
 drivers/tty/serial/imx.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index c190986..11afe58 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -190,6 +190,7 @@
 enum imx_uart_type {
 	IMX1_UART,
 	IMX21_UART,
+	IMX53_UART,
 	IMX6Q_UART,
 };
 
@@ -247,6 +248,10 @@ static struct imx_uart_data imx_uart_devdata[] = {
 		.uts_reg = IMX21_UTS,
 		.devtype = IMX21_UART,
 	},
+	[IMX53_UART] = {
+		.uts_reg = IMX21_UTS,
+		.devtype = IMX53_UART,
+	},
 	[IMX6Q_UART] = {
 		.uts_reg = IMX21_UTS,
 		.devtype = IMX6Q_UART,
@@ -261,6 +266,9 @@ static const struct platform_device_id imx_uart_devtype[] = {
 		.name = "imx21-uart",
 		.driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART],
 	}, {
+		.name = "imx53-uart",
+		.driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX53_UART],
+	}, {
 		.name = "imx6q-uart",
 		.driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX6Q_UART],
 	}, {
@@ -271,6 +279,7 @@ MODULE_DEVICE_TABLE(platform, imx_uart_devtype);
 
 static const struct of_device_id imx_uart_dt_ids[] = {
 	{ .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], },
+	{ .compatible = "fsl,imx53-uart", .data = &imx_uart_devdata[IMX53_UART], },
 	{ .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
 	{ .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], },
 	{ /* sentinel */ }
@@ -292,6 +301,11 @@ static inline int is_imx21_uart(struct imx_port *sport)
 	return sport->devdata->devtype == IMX21_UART;
 }
 
+static inline int is_imx53_uart(struct imx_port *sport)
+{
+	return sport->devdata->devtype == IMX53_UART;
+}
+
 static inline int is_imx6q_uart(struct imx_port *sport)
 {
 	return sport->devdata->devtype == IMX6Q_UART;
@@ -1254,8 +1268,8 @@ static int imx_startup(struct uart_port *port)
 	writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
 	/* Can we enable the DMA support? */
-	if (is_imx6q_uart(sport) && !uart_console(port) &&
-	    !sport->dma_is_inited) {
+	if ((is_imx6q_uart(sport) || is_imx53_uart(sport)) &&
+	    !uart_console(port) && !sport->dma_is_inited) {
 		retval = imx_uart_dma_init(sport);
 		if (retval) {
 			clk_disable_unprepare(sport->clk_per);
-- 
2.7.4