linux-kernel - Applied "regulator: qcom_smd: Fix voltage ranges for pm8x41" to the regulator tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1bVdwK-0002kb-B3@debutante>
Date:	Fri, 05 Aug 2016 13:09:24 +0100
From:	Mark Brown <broonie@...nel.org>
To:	Stephen Boyd <sboyd@...eaurora.org>
Cc:	Mark Brown <broonie@...nel.org>, Mark Brown <broonie@...nel.org>,
	linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	Andy Gross <andy.gross@...aro.org>,
	Bjorn Andersson <bjorn.andersson@...aro.org>
Subject: Applied "regulator: qcom_smd: Fix voltage ranges for pm8x41" to the regulator tree

The patch

   regulator: qcom_smd: Fix voltage ranges for pm8x41

has been applied to the regulator tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 290284776bb281759b11faa287b8abccaf74bfcb Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@...eaurora.org>
Date: Mon, 11 Jul 2016 14:50:07 -0700
Subject: [PATCH] regulator: qcom_smd: Fix voltage ranges for pm8x41

The voltage ranges listed here are wrong. The correct ranges can
be seen in the "native" spmi regulator driver
qcom_spmi-regulator.c at pldo_ranges[], ftsmps_ranges[] and
boost_ranges[] for the pldo, ftsmps, and boost type regulators.
Port these ranges over to the RPM SMD regulator driver so that we
list the appropriate set of supported voltages on pldos.

Doing this allows us to specify a voltage like 3075000 for l24,
whereas before that wasn't a supported voltage.

Fixes: da65e367b67e ("regulator: Regulator driver for the Qualcomm RPM")
Signed-off-by: Stephen Boyd <sboyd@...eaurora.org>
Reviewed-by: Andy Gross <andy.gross@...aro.org>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
 drivers/regulator/qcom_smd-regulator.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 5022fa8d10c6..47cd28e960db 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -221,29 +221,30 @@ static const struct regulator_desc pm8x41_hfsmps = {
 static const struct regulator_desc pm8841_ftsmps = {
 	.linear_ranges = (struct regulator_linear_range[]) {
 		REGULATOR_LINEAR_RANGE(350000,  0, 184, 5000),
-		REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000),
+		REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000),
 	},
 	.n_linear_ranges = 2,
-	.n_voltages = 340,
+	.n_voltages = 262,
 	.ops = &rpm_smps_ldo_ops,
 };

 static const struct regulator_desc pm8941_boost = {
 	.linear_ranges = (struct regulator_linear_range[]) {
-		REGULATOR_LINEAR_RANGE(4000000, 0, 15, 100000),
+		REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000),
 	},
 	.n_linear_ranges = 1,
-	.n_voltages = 16,
+	.n_voltages = 31,
 	.ops = &rpm_smps_ldo_ops,
 };

 static const struct regulator_desc pm8941_pldo = {
 	.linear_ranges = (struct regulator_linear_range[]) {
-		REGULATOR_LINEAR_RANGE( 750000,  0,  30, 25000),
-		REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000),
+		REGULATOR_LINEAR_RANGE( 750000,  0,  63, 12500),
+		REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000),
+		REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000),
 	},
-	.n_linear_ranges = 2,
-	.n_voltages = 100,
+	.n_linear_ranges = 3,
+	.n_voltages = 164,
 	.ops = &rpm_smps_ldo_ops,
 };

-- 
2.8.1