linux-kernel - Re: [Intel-wired-lan] e1000e: PHY cann't be initialized correctly on some I218 controllers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <57A6F7A9.1030401@compulab.co.il>
Date:	Sun, 7 Aug 2016 11:56:09 +0300
From:	Denis Turischev <denis.turischev@...pulab.co.il>
To:	Raanan Avargil <raanan.avargil@...el.com>,
	intel-wired-lan@...ts.osuosl.org,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Cc:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [Intel-wired-lan] e1000e: PHY cann't be initialized correctly on
 some I218 controllers

Hi Raanan,

On 08/04/2016 07:18 PM, Raanan Avargil wrote:
> It is hard to determine what is exactly the problem here and what causes the -3 error, but this is not the place to perform hw reset and retry to init the phy.

I agree that may be this is not the correct place for hw reset, can you advice about another solution?

It works, not only for me, for example it helps here:
http://www.linux.org.ru/forum/linux-hardware/10268216

Another fact that Windows drivers work fine with the same hw.

Denis