linux-kernel - [PATCH v2 1/6] dt-bindings: rockchip-dw-mshc: add description of rockchip,power-invert

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1470533644-16357-1-git-send-email-shawn.lin@rock-chips.com>
Date:	Sun,  7 Aug 2016 09:34:04 +0800
From:	Shawn Lin <shawn.lin@...k-chips.com>
To:	Jaehoon Chung <jh80.chung@...sung.com>,
	Ulf Hansson <ulf.hansson@...aro.org>
Cc:	Rob Herring <robh+dt@...nel.org>, linux-mmc@...r.kernel.org,
	linux-kernel@...r.kernel.org, Heiko Stuebner <heiko@...ech.de>,
	linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
	Shawn Lin <shawn.lin@...k-chips.com>
Subject: [PATCH v2 1/6] dt-bindings: rockchip-dw-mshc: add description of rockchip,power-invert

rockchip,power-invert is used for rockchip to introduce the flag
DW_MMC_CARD_PWR_INVERT from DT which should make the power control
of dw_mmc more flexible according to different hw design.

Signed-off-by: Shawn Lin <shawn.lin@...k-chips.com>

---

Changes in v2: None

 Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
index 07184e8..5640659 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
@@ -30,6 +30,12 @@ Optional Properties:
   probing, low speeds or in case where all phases work at tuning time.
   If not specified 0 deg will be used.
 
+* rockchip,power-invert: Invert the power control of PWREN register. If adding
+  it, the card should be in power-on state when the power io outputs high level
+  voltage, and it should be in power-off state when outputing low level voltage.
+  otherwise the behaviour of power control should be the opposite way which is
+  the default policy of dw mshc.
+
 Example:
 
 	rkdwmmc0@...00000 {
-- 
2.3.7