[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date: Mon, 8 Aug 2016 06:05:09 +0000
From: <Wenyou.Yang@...rochip.com>
To: <robh@...nel.org>, <wenyou.yang@...el.com>
CC: <sre@...nel.org>, <dbaryshkov@...il.com>, <dwmw2@...radead.org>,
<pawel.moll@....com>, <broonie@...nel.org>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <nicolas.ferre@...el.com>,
<linux-pm@...r.kernel.org>
Subject: RE: [PATCH v3 7/7] doc: bindings: act8945a-charger: Update
properties
Hi Rob,
> -----Original Message-----
> From: Rob Herring [mailto:robh@...nel.org]
> Sent: 2016年7月30日 5:40
> To: Wenyou Yang <wenyou.yang@...el.com>
> Cc: Sebastian Reichel <sre@...nel.org>; Dmitry Eremin-Solenikov
> <dbaryshkov@...il.com>; David Woodhouse <dwmw2@...radead.org>; Pawel
> Moll <pawel.moll@....com>; Mark Brown <broonie@...nel.org>; Ian Campbell
> <ijc+devicetree@...lion.org.uk>; Kumar Gala <galak@...eaurora.org>; linux-
> kernel@...r.kernel.org; devicetree@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org; Nicolas Ferre <nicolas.ferre@...el.com>; linux-
> pm@...r.kernel.org
> Subject: Re: [PATCH v3 7/7] doc: bindings: act8945a-charger: Update properties
>
> On Fri, Jul 29, 2016 at 09:25:28AM +0800, Wenyou Yang wrote:
> > Due the driver improvements, update the properties,
> > - Remove "active-semi,check-battery-temperature" property.
> > - Add the properties, "active-semi,irq_gpio"
> > and "active-semi,lbo-gpios".
> >
> > Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
> > ---
> >
> > Changes in v3: None
> > Changes in v2: None
> >
> > Documentation/devicetree/bindings/power/act8945a-charger.txt | 6 ++++--
> > 1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/power/act8945a-charger.txt
> b/Documentation/devicetree/bindings/power/act8945a-charger.txt
> > index bea254c..d7cf05b 100644
> > --- a/Documentation/devicetree/bindings/power/act8945a-charger.txt
> > +++ b/Documentation/devicetree/bindings/power/act8945a-charger.txt
> > @@ -4,10 +4,12 @@ Required properties:
> > - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
> > - active-semi,chglev-gpios: charge current level phandle with args
> > as described in ../gpio/gpio.txt.
> > + - active-semi,irq_gpios: specify the charger interrupt input phanle
> > + with args as as described in ../gpio/gpio.txt.
>
> As I said in v2, this should be an interrupt property instead.
Sorry for forgetting to change.
Accepted, will be in next version. Thanks.
>
> > + - active-semi,lbo-gpios: specify the low battery voltage detect phandle
> > + with args as as described in ../gpio/gpio.txt.
>
> Maybe this one too.
The capacity level function need to read this pin level, so this one should not
use "interrupts" property.
>
> >
> > Optional properties:
> > - - active-semi,check-battery-temperature: boolean to check the battery
> > - temperature or not.
> > - active-semi,input-voltage-threshold-microvolt: unit: mV;
> > Specifies the charger's input over-voltage threshold value;
> > The value can be: 6600, 7000, 7500, 8000; default: 6600
> > --
> > 2.7.4
> >
Best Regards,
Wenyou Yang
Powered by blists - more mailing lists