[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87mvkmb8sp.fsf@linux.intel.com>
Date: Tue, 09 Aug 2016 12:17:42 +0300
From: Felipe Balbi <felipe.balbi@...ux.intel.com>
To: Lu Baolu <baolu.lu@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Alan Stern <stern@...land.harvard.edu>
Cc: linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
Lu Baolu <baolu.lu@...ux.intel.com>, stable@...r.kernel.org,
Alan Stern <stern@...land.harvard.edu>
Subject: Re: [PATCH 1/1] usb: misc: usbtest: add fix for driver hang
Hi,
Lu Baolu <baolu.lu@...ux.intel.com> writes:
> In sg_timeout(), req->status is set to "-ETIMEDOUT" before calling
> into usb_sg_cancel(). usb_sg_cancel() will do nothing and return
> directly if req->status has been set to a non-zero value. This will
> cause driver hang as soon as transfer time out is triggered.
>
> In my test case, below system log shows when port reset happens after
> urb being submitted.
>
> [55099.746213] usb 2-3: USB disconnect, device number 2
> [55321.955451] INFO: task kworker/6:0:59 blocked for more than 120 seconds.
> [55321.955463] Not tainted 4.7.0-rc6+ #19
> [55321.955466] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [55321.955472] kworker/6:0 D ffff88045ad3bbf8 0 59 2 0x00000000
> [55321.955489] Workqueue: usb_hub_wq hub_event
> [55321.955493] ffff88045ad3bbf8 ffff880400000030 ffff88045ad30f40 ffff88045ad3bbd0
> [55321.955499] ffff88045ad3c000 ffff8804590920fc ffff88045ad30f40 00000000ffffffff
> [55321.955505] ffff880459092100 ffff88045ad3bc10 ffffffff817b5925 ffff8804590920f8
> [55321.955511] Call Trace:
> [55321.955521] [<ffffffff817b5925>] schedule+0x35/0x80
> [55321.955527] [<ffffffff817b5c1e>] schedule_preempt_disabled+0xe/0x10
> [55321.955533] [<ffffffff817b7505>] __mutex_lock_slowpath+0x95/0x110
> [55321.955538] [<ffffffff817b759f>] mutex_lock+0x1f/0x2f
> [55321.955544] [<ffffffff815b28a3>] usb_disconnect+0x53/0x270
> [55321.955550] [<ffffffff815b4521>] hub_port_connect+0x71/0x900
> [55321.955556] [<ffffffff815b08be>] ? hub_port_reset+0x3de/0x630
> [55321.955562] [<ffffffff815b53ee>] hub_event+0x63e/0xb20
> [55321.955569] [<ffffffff810ae675>] ? put_prev_entity+0x35/0x730
> [55321.955577] [<ffffffff810921f3>] process_one_work+0x153/0x3f0
> [55321.955583] [<ffffffff810929ab>] worker_thread+0x12b/0x4b0
> [55321.955590] [<ffffffff81092880>] ? rescuer_thread+0x340/0x340
> [55321.955595] [<ffffffff810981c9>] kthread+0xc9/0xe0
> [55321.955601] [<ffffffff817b961f>] ret_from_fork+0x1f/0x40
> [55321.955606] [<ffffffff81098100>] ? kthread_park+0x60/0x60
> [55321.955638] INFO: task testusb:3011 blocked for more than 120 seconds.
> [55321.955643] Not tainted 4.7.0-rc6+ #19
> [55321.955647] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [55321.955651] testusb D ffff880449a079f8 0 3011 2367 0x00000000
> [55321.955657] ffff880449a079f8 0000000000000002 ffff88045754cc40 ffffffff815b91b9
> [55321.955663] ffff880449a08000 7fffffffffffffff ffff880449a07cb0 ffff88045754cc40
> [55321.955668] 0000000000000000 ffff880449a07a10 ffffffff817b5925 ffff880449a07cb8
> [55321.955673] Call Trace:
> [55321.955680] [<ffffffff815b91b9>] ? usb_hcd_submit_urb+0xa9/0xba0
> [55321.955685] [<ffffffff817b5925>] schedule+0x35/0x80
> [55321.955691] [<ffffffff817b8661>] schedule_timeout+0x231/0x2d0
> [55321.955698] [<ffffffff8117a592>] ? __alloc_pages_nodemask+0x112/0x2b0
> [55321.955703] [<ffffffff817b62e4>] wait_for_completion+0xa4/0x110
> [55321.955709] [<ffffffff810a2cb0>] ? wake_up_q+0x80/0x80
> [55321.955713] [<ffffffff815bcf78>] usb_sg_wait+0x138/0x190
> [55321.955722] [<ffffffffc01b6fdf>] perform_sglist+0xef/0x180 [usbtest]
> [55321.955728] [<ffffffffc01b6020>] ? usbtest_resume+0x10/0x10 [usbtest]
> [55321.955734] [<ffffffffc01b9648>] usbtest_do_ioctl+0x898/0x1520 [usbtest]
> [55321.955740] [<ffffffff815ba2a5>] ? usb_hcd_reset_endpoint+0x25/0x60
> [55321.955745] [<ffffffff815bd4f5>] ? usb_enable_endpoint+0x85/0x90
> [55321.955751] [<ffffffffc01ba3f3>] usbtest_ioctl+0x123/0x26e [usbtest]
> [55321.955756] [<ffffffff81172335>] ? filemap_map_pages+0x295/0x310
> [55321.955763] [<ffffffff815c5cc8>] ? proc_ioctl+0x48/0x210
> [55321.955769] [<ffffffff815c5db0>] proc_ioctl+0x130/0x210
> [55321.955776] [<ffffffff815c7d4a>] usbdev_do_ioctl+0x50a/0x1170
> [55321.955782] [<ffffffff815c89de>] usbdev_ioctl+0xe/0x20
> [55321.955789] [<ffffffff81207786>] do_vfs_ioctl+0x96/0x590
> [55321.955794] [<ffffffff81203723>] ? putname+0x53/0x60
> [55321.955800] [<ffffffff81207cf9>] SyS_ioctl+0x79/0x90
> [55321.955806] [<ffffffff817b93f6>] entry_SYSCALL_64_fastpath+0x1e/0xa
>
> This patch fixes this driver hang. It should be back-ported to stable
> kernel with version after v3.15.
>
> Cc: stable@...r.kernel.org
> Cc: Alan Stern <stern@...land.harvard.edu>
> Signed-off-by: Lu Baolu <baolu.lu@...ux.intel.com>
> ---
> drivers/usb/misc/usbtest.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
> index 6b978f0..6c6586d 100644
> --- a/drivers/usb/misc/usbtest.c
> +++ b/drivers/usb/misc/usbtest.c
> @@ -585,7 +585,6 @@ static void sg_timeout(unsigned long _req)
> {
> struct usb_sg_request *req = (struct usb_sg_request *) _req;
>
> - req->status = -ETIMEDOUT;
> usb_sg_cancel(req);
> }
IMO, req->status = -ETIMEDOUT should still be done, but perhaps after
usb_sg_cancel(). Alan?
--
balbi
Download attachment "signature.asc" of type "application/pgp-signature" (819 bytes)
Powered by blists - more mailing lists