| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1470755744-7837-3-git-send-email-lucile.quirion@savoirfairelinux.com>
Date: Tue, 9 Aug 2016 11:15:44 -0400
From: Lucile Quirion <lucile.quirion@...oirfairelinux.com>
To: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <kernel@...gutronix.de>,
Fabio Estevam <fabio.estevam@....com>,
kernel@...oirfairelinux.com,
Mark Featherston <mark@...eddedarm.com>,
Lucile Quirion <lucile.quirion@...oirfairelinux.com>
Subject: [PATCH v3 2/2] ARM: dts: TS-4900: add basic device tree
These device trees add support for TS-4900 by Technologic Systems.
More details here:
http://wiki.embeddedarm.com/wiki/TS-4900
Signed-off-by: Lucile Quirion <lucile.quirion@...oirfairelinux.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx6dl-ts4900.dts | 49 ++++
arch/arm/boot/dts/imx6q-ts4900.dts | 53 ++++
arch/arm/boot/dts/imx6qdl-ts4900.dtsi | 481 ++++++++++++++++++++++++++++++++++
4 files changed, 585 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-ts4900.dts
create mode 100644 arch/arm/boot/dts/imx6q-ts4900.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-ts4900.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faacd52..c29ab2d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -339,6 +339,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-sabreauto.dtb \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
+ imx6dl-ts4900.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6s-8034.dtb \
imx6dl-tx6s-8035.dtb \
@@ -382,6 +383,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-sabresd.dtb \
imx6q-sbc6x.dtb \
imx6q-tbs2910.dtb \
+ imx6q-ts4900.dtb \
imx6q-tx6q-1010.dtb \
imx6q-tx6q-1010-comtft.dtb \
imx6q-tx6q-1020.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/imx6dl-ts4900.dts
new file mode 100644
index 0000000..85eddeb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-ts4900.dts
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-ts4900.dtsi"
+
+/ {
+ model = "Technologic Systems i.MX6 Solo/DualLite TS-4900 (Default Device Tree)";
+ compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/imx6q-ts4900.dts
new file mode 100644
index 0000000..9b81ebc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ts4900.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-ts4900.dtsi"
+
+/ {
+ model = "Technologic Systems i.MX6 Quad TS-4900 (Default Device Tree)";
+ compatible = "technologic,imx6q-ts4900", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
new file mode 100644
index 0000000..5c26b26
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
@@ -0,0 +1,481 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ aliases {
+ ethernet0 = &fec;
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds1>;
+ compatible = "gpio-leds";
+
+ green-led {
+ label = "green-led";
+ gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ red-led {
+ label = "red-led";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3p3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ n25q064: flash@0 {
+ compatible = "micron,n25q064", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+&ecspi2 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ isl12022: rtc@6f {
+ compatible = "isil,isl12022";
+ reg = <0x6f>;
+ };
+
+ gpio8: gpio@28 {
+ compatible = "technologic,ts4900-gpio";
+ reg = <0x28>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ ngpio = <32>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 /* Onboard flash CS1# */
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1 /* Offboard CS0# */
+ MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x100b1 /* FPGA CS1# */
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b1 /* FPGA_RESET# */
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 /* FPGA_DONE */
+ MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x10 /* FPGA 24MHZ */
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1 /* FPGA_IRQ */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x4001b0a8
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b1 /* ETH_PHY_RESET */
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b1
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b1 /* OFF_BD_RESET# */
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1 /* EN_USB_5V# */
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b1 /* EN_LCD_3.3V */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* Audio CLK */
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1 /* DIO_1 */
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b1 /* DIO_2 */
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b1 /* DIO_3 */
+ MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b1 /* DIO_4 */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1 /* DIO_5 */
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b1 /* DIO_7 */
+ MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b1 /* DIO_8 */
+ MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b1 /* DIO_9 */
+ MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b1 /* DIO_0 */
+ MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b1 /* DIO_6 */
+ MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b1 /* CPU_DIO_A */
+ MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b1 /* DIO_2 */
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b1 /* CPU_DIO_B */
+ MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b1 /* BUS_ALE# */
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b0b1 /* DIO_15 */
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b1 /* BUS_DIR */
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1 /* BUS_CS# */
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* DIO_14 */
+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x1b0b1 /* DIO_16 */
+ MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x1b0b1 /* DIO_12 */
+ MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b1 /* DIO_18 */
+ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b1 /* DIO_19 */
+ MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b1 /* DIO_20 */
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b1 /* BUS_BHE# */
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b1 /* DIO_13 */
+ MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b1 /* EIM_WAIT# */
+ MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b1 /* DIO_10 */
+ MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b1 /* MUX_AD_00 */
+ MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b1 /* MUX_AD_01 */
+ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1 /* MUX_AD_02 */
+ MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b1 /* MUX_AD_03 */
+ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1 /* MUX_AD_04 */
+ MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 /* MUX_AD_05 */
+ MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b1 /* MUX_AD_06 */
+ MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1 /* MUX_AD_07 */
+ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b1 /* MUX_AD_08 */
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b1 /* MUX_AD_09 */
+ MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b1 /* MUX_AD_10 */
+ MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b1 /* MUX_AD_11 */
+ MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b0b1 /* MUX_AD_12 */
+ MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b1 /* MUX_AD_13 */
+ MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b0b1 /* MUX_AD_14 */
+ MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b1 /* MUX_AD_15 */
+ MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b1 /* LCD_CLK */
+ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b1 /* DE */
+ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b1 /* Hsync */
+ MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b1 /* Vsync */
+ MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b1
+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
+ >;
+ };
+
+ pinctrl_leds1: leds1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 /* RED_LED# */
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1 /* GREEN_LED# */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x17059 /* WIFI IRQ */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b1 /* EN_SD_POWER# */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ vmmc-supply = <®_3p3v>;
+ bus-width = <4>;
+ fsl,wp-controller;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ vmmc-supply = <®_3p3v>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
--
2.5.5
Powered by blists - more mailing lists