lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <cover.1470739193.git.peter.senna@collabora.com>
Date:	Tue,  9 Aug 2016 18:41:38 +0200
From:	Peter Senna Tschudin <peter.senna@...labora.com>
To:	airlied@...ux.ie, akpm@...ux-foundation.org,
	daniel.vetter@...ll.ch, davem@...emloft.net,
	devicetree@...r.kernel.org, dri-devel@...ts.freedesktop.org,
	enric.balletbo@...labora.com, eballetbo@...il.com,
	galak@...eaurora.org, gregkh@...uxfoundation.org, heiko@...ech.de,
	ijc+devicetree@...lion.org.uk, javier@...hile0.org, jslaby@...e.cz,
	kernel@...gutronix.de, linux-arm-kernel@...ts.infradead.org,
	linux@...linux.org.uk, linux-kernel@...r.kernel.org,
	linux@...ck-us.net, mark.rutland@....com, martin.donnelly@...com,
	martyn.welch@...labora.co.uk, mchehab@....samsung.com,
	pawel.moll@....com, peter.senna@...labora.com,
	peter.senna@...il.com, p.zabel@...gutronix.de,
	thierry.reding@...il.com, rmk+kernel@...linux.org.uk,
	robh+dt@...nel.org, shawnguo@...nel.org, tiwai@...e.com,
	treding@...dia.com, ykk@...k-chips.com
Subject: [PATCH V5 0/4] Add driver for GE B850v3 LVDS/DP++ Bridge

The series adds a driver that creates a drm_bridge and a drm_connector for the
LVDS to DP++ display bridge of the GE B850v3.

There are two physical bridges on the video signal pipeline: a STDP4028(LVDS to
DP) and a STDP2690(DP to DP++).  The hardware and firmware made it complicated
for this binding to comprise two device tree nodes, as the design goal is to
configure both bridges based on the LVDS signal, which leave the driver
powerless to control the video processing pipeline. The two bridges behaves as
a single bridge, and the driver is only needed for telling the host about EDID /
HPD, and for giving the host powers to ack interrupts. The video signal
pipeline is as follows:

  Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output

The patches from the series:
 [1/4] Change the imx-ldb driver to allow attaching a bridge and not only a LVDS
       panel.

 [2/4] Devicetree documentation for the GE B850v3 LVDS/DP++ Bridge

 [3/4] Add the driver, make changes to MAINTAINERS, Kconfig and Makefile

 [4/4] Make the changes to the B850v3 dts file to enable the GE B850v3
       LVDS/DP++ Bridge.

Changes from V3:
 - Removed the patch that was configuring the mapping between IPUs and external
   displays on the dts file

Peter Senna Tschudin (4):
  drm/imx-ldb: Add support to drm-bridge
  Documentation/devicetree/bindings: b850v3_lvds_dp
  drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge
  dts/imx6q-b850v3: Use GE B850v3 LVDS/DP++ Bridge

 .../devicetree/bindings/ge/b850v3-lvds-dp.txt      |  37 ++
 MAINTAINERS                                        |   8 +
 arch/arm/boot/dts/imx6q-b850v3.dts                 |  30 ++
 drivers/gpu/drm/bridge/Kconfig                     |  11 +
 drivers/gpu/drm/bridge/Makefile                    |   1 +
 drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c         | 405 +++++++++++++++++++++
 drivers/gpu/drm/imx/imx-ldb.c                      | 118 ++++--
 7 files changed, 570 insertions(+), 40 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt
 create mode 100644 drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c

-- 
2.5.5

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ