[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <57AAAFAA.8060200@samsung.com>
Date: Wed, 10 Aug 2016 13:38:02 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: Lin Huang <hl@...k-chips.com>, heiko@...ech.de
Cc: myungjoo.ham@...sung.com, mark.yao@...k-chips.com,
airlied@...ux.ie, mturquette@...libre.com, dbasehore@...omium.org,
sboyd@...eaurora.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, dianders@...omium.org,
linux-rockchip@...ts.infradead.org, kyungmin.park@...sung.com,
linux-arm-kernel@...ts.infradead.org, tixy@...aro.org,
typ@...k-chips.com, sudeep.holla@....com, mark.rutland@....com,
linux-pm@...r.kernel.org
Subject: Re: [PATCH v5 6/8] Documentation: bindings: add dt documentation for
rk3399 dmc
Hi Lin,
On 2016년 08월 10일 12:26, Lin Huang wrote:
> This patch adds the documentation for rockchip rk3399 dmc driver.
>
> Signed-off-by: Lin Huang <hl@...k-chips.com>
> ---
> Changes in v5:
> -None
>
> Changes in v4:
> -None
>
> Changes in v3:
> -None
>
> Changes in v2:
> -None
>
> Changes in v1:
> -None
>
> .../devicetree/bindings/devfreq/rk3399_dmc.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
>
> diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> new file mode 100644
> index 0000000..90e9581
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> @@ -0,0 +1,35 @@
> +* Rockchip rk3399 dmc device
dmc -> DMC(Dynamic Memory Controller ?)
> +
> +Required properties:
> +- compatible: Must be "rockchip,rk3399-dmc".
> +- devfreq-events: Node to get ddr loading, Refer to
> + Documentation/devicetree/bindings/devfreq/rockchip-dif.txt
> +- interrupts: The interrupt number to the cpu. The interrupt specifier format
> + depends on the interrupt controller.
If you add the specific role of this interrupt, it would be better
to understand the operation of interrupt.
> +- clocks: Phandles for clock specified in "clock-names" property
> +- clock-names : The name of clock used by the DFI, must be "pclk_ddr_mon";
"pclk_ddr_mon" -> "dmc_clk"
> +- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt
> + for details.
> +- center-supply: Dmc supply node.
> +- status: Marks the node enabled/disabled.
> +
> +Optional properties:
> +- ddr_timing: ddr timing need to pass to arm trust firmware
> +- upthreshold: the upthreshold to simpleondeamnd policy
> +- downdifferential: The downdifferential to simpleondeamnd policy
> +
> +Example:
> + dmc: dmc {
> + compatible = "rockchip,rk3399-dmc";
> + devfreq-events = <&dfi>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_DDRCLK>;
> + clock-names = "dmc_clk";
> + ddr_timing = <&ddr_timing>;
I think that you should add the detailed document for
'ddr_timing' because we don't understand the 'ddr_timing' easily
, it depends on the trust firmware.
> + operating-points-v2 = <&dmc_opp_table>;
I think that you better to add the example of 'dmc_opp_table'
in the documentation.
> + center-supply = <&ppvar_centerlogic>;
> + upthreshold = <15>;
> + downdifferential = <10>;
> + status = "disabled";
> + };
> +
>
Regards,
Chanwoo Choi
Powered by blists - more mailing lists