| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1470952373-4823-1-git-send-email-bjorn.andersson@linaro.org>
Date: Thu, 11 Aug 2016 14:52:50 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: linux-remoteproc@...r.kernel.org
Cc: Ohad Ben-Cohen <ohad@...ery.com>, linux-kernel@...r.kernel.org,
Suman Anna <s-anna@...com>, Lee Jones <lee.jones@...aro.org>,
Loic Pallardy <loic.pallardy@...com>
Subject: [PATCH v2 1/4] remoteproc: Introduce auto-boot flag
Introduce an "auto-boot" flag on rprocs to make it possible to flag
remote processors without vdevs to automatically boot once the firmware
is found.
Preserve previous behavior of the wkup_m3 processor being explicitly
booted by a consumer.
Cc: Lee Jones <lee.jones@...aro.org>
Cc: Loic Pallardy <loic.pallardy@...com>
Cc: Suman Anna <s-anna@...com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
Changes since v1:
- s/always_on/auto_boot/
- Fixed double increment of "power" in recover path
- Marked wkup_m3 to not auto_boot
drivers/remoteproc/remoteproc_core.c | 28 +++++++++++++++++++++++++++-
drivers/remoteproc/remoteproc_virtio.c | 13 -------------
drivers/remoteproc/wkup_m3_rproc.c | 2 ++
include/linux/remoteproc.h | 1 +
4 files changed, 30 insertions(+), 14 deletions(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index fe0539ed9cb5..5ca98039e494 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -933,6 +933,10 @@ static void rproc_fw_config_virtio(const struct firmware *fw, void *context)
/* look for virtio devices and register them */
ret = rproc_handle_resources(rproc, tablesz, rproc_vdev_handler);
+ /* if rproc is marked always-on, request it to boot */
+ if (rproc->auto_boot)
+ rproc_boot_nowait(rproc);
+
out:
release_firmware(fw);
/* allow rproc_del() contexts, if any, to proceed */
@@ -978,11 +982,16 @@ static int rproc_add_virtio_devices(struct rproc *rproc)
int rproc_trigger_recovery(struct rproc *rproc)
{
struct rproc_vdev *rvdev, *rvtmp;
+ int ret;
dev_err(&rproc->dev, "recovering %s\n", rproc->name);
init_completion(&rproc->crash_comp);
+ /* shut down the remote */
+ /* TODO: make sure this works with rproc->power > 1 */
+ rproc_shutdown(rproc);
+
/* clean up remote vdev entries */
list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node)
rproc_remove_virtio_dev(rvdev);
@@ -993,7 +1002,18 @@ int rproc_trigger_recovery(struct rproc *rproc)
/* Free the copy of the resource table */
kfree(rproc->cached_table);
- return rproc_add_virtio_devices(rproc);
+ ret = rproc_add_virtio_devices(rproc);
+ if (ret)
+ return ret;
+
+ /*
+ * boot the remote processor up again, if the async firmware loader
+ * didn't do so already, waiting for the async fw load to finish
+ */
+ if (!rproc->auto_boot)
+ rproc_boot(rproc);
+
+ return 0;
}
/**
@@ -1374,6 +1394,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
rproc->name = name;
rproc->ops = ops;
rproc->priv = &rproc[1];
+ rproc->auto_boot = true;
device_initialize(&rproc->dev);
rproc->dev.parent = dev;
@@ -1452,6 +1473,11 @@ int rproc_del(struct rproc *rproc)
/* if rproc is just being registered, wait */
wait_for_completion(&rproc->firmware_loading_complete);
+ /* if rproc is marked always-on, rproc_add() booted it */
+ /* TODO: make sure this works with rproc->power > 1 */
+ if (rproc->auto_boot)
+ rproc_shutdown(rproc);
+
/* clean up remote vdev entries */
list_for_each_entry_safe(rvdev, tmp, &rproc->rvdevs, node)
rproc_remove_virtio_dev(rvdev);
diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
index cc91556313e1..574c90ce07f7 100644
--- a/drivers/remoteproc/remoteproc_virtio.c
+++ b/drivers/remoteproc/remoteproc_virtio.c
@@ -136,11 +136,6 @@ static void __rproc_virtio_del_vqs(struct virtio_device *vdev)
static void rproc_virtio_del_vqs(struct virtio_device *vdev)
{
- struct rproc *rproc = vdev_to_rproc(vdev);
-
- /* power down the remote processor before deleting vqs */
- rproc_shutdown(rproc);
-
__rproc_virtio_del_vqs(vdev);
}
@@ -149,7 +144,6 @@ static int rproc_virtio_find_vqs(struct virtio_device *vdev, unsigned nvqs,
vq_callback_t *callbacks[],
const char * const names[])
{
- struct rproc *rproc = vdev_to_rproc(vdev);
int i, ret;
for (i = 0; i < nvqs; ++i) {
@@ -160,13 +154,6 @@ static int rproc_virtio_find_vqs(struct virtio_device *vdev, unsigned nvqs,
}
}
- /* now that the vqs are all set, boot the remote processor */
- ret = rproc_boot_nowait(rproc);
- if (ret) {
- dev_err(&rproc->dev, "rproc_boot() failed %d\n", ret);
- goto error;
- }
-
return 0;
error:
diff --git a/drivers/remoteproc/wkup_m3_rproc.c b/drivers/remoteproc/wkup_m3_rproc.c
index 02d271d101b4..3811cb522af3 100644
--- a/drivers/remoteproc/wkup_m3_rproc.c
+++ b/drivers/remoteproc/wkup_m3_rproc.c
@@ -167,6 +167,8 @@ static int wkup_m3_rproc_probe(struct platform_device *pdev)
goto err;
}
+ rproc->auto_boot = false;
+
wkupm3 = rproc->priv;
wkupm3->rproc = rproc;
wkupm3->pdev = pdev;
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 1c457a8dd5a6..76d936cabbf8 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -443,6 +443,7 @@ struct rproc {
struct resource_table *cached_table;
u32 table_csum;
bool has_iommu;
+ bool auto_boot;
};
/* we currently support only two vrings per rvdev */
--
2.5.0
Powered by blists - more mailing lists