[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1471002534-10673-1-git-send-email-Zubair.Kakakhel@imgtec.com>
Date: Fri, 12 Aug 2016 12:48:51 +0100
From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@...tec.com>
To: <gregkh@...uxfoundation.org>, <arnd@...db.de>
CC: <jslaby@...e.com>, <linux-kernel@...r.kernel.org>,
<linux-serial@...r.kernel.org>, <Zubair.Kakakhel@...tec.com>
Subject: [Patch v2 0/3] misc: pch_phub: Add quirks for MIPS Boston platform
Hi,
These are a few patches for using the EG20T UART on the Imagination
Technologies Boston development platform
2 quirks needed
- Pass a specific value for the prefetch register from DT instead of using
the hard-coded default.
- Add a quirk for using the internal 25MHz clock source for the UART block
The patches for Boston platform are inflight.
https://patchwork.kernel.org/patch/8200941/
So pasting a DT node snippet here.
+ eg20t_pch@2,0,0 {
+ compatible = "pci8086,8801";
+ reg = <0x00020000 0 0 0 0>;
+
+ intel,eg20t-prefetch = <0>;
+ };
+ eg20t_uart0@02,10,1 {
+ compatible = "pci8086,8811";
+ reg = <0x00025100 0 0 0 0>;
+
+ clock-frequency = <25000000>;
+ };
Suggestions and feedback welcome.
Based on v4.8-rc1
Regards,
ZubairLK
Zubair Lutfullah Kakakhel (3):
misc: pch_phub: Read prefetch value from device tree if passed
misc: pch_phub: Add UART_CLK quirk for Boston platform
serial: pch_uart: Add support for reading clock-frequency from DT
drivers/misc/pch_phub.c | 20 +++++++++++++++++++-
drivers/tty/serial/Kconfig | 2 +-
drivers/tty/serial/pch_uart.c | 5 +++++
3 files changed, 25 insertions(+), 2 deletions(-)
--
1.9.1
Powered by blists - more mailing lists