| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1471051139-23411-1-git-send-email-bjorn.andersson@linaro.org>
Date: Fri, 12 Aug 2016 18:18:58 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Ohad Ben-Cohen <ohad@...ery.com>, linux-kernel@...r.kernel.org,
linux-remoteproc@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Bjorn Andersson <bjorn.andersson@...ymobile.com>
Subject: [PATCH v4 1/2] dt-binding: remoteproc: Introduce Qualcomm WCNSS loader binding
From: Bjorn Andersson <bjorn.andersson@...ymobile.com>
The document defines the binding for a component that loads firmware for
and boots the Qualcomm WCNSS core.
Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@...ymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
Changes since v3:
- None
Changes since v2:
- None
.../bindings/remoteproc/qcom,wcnss-pil.txt | 132 +++++++++++++++++++++
1 file changed, 132 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
new file mode 100644
index 000000000000..0d2361ebe3d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
@@ -0,0 +1,132 @@
+Qualcomm WCNSS Peripheral Image Loader
+
+This document defines the binding for a component that loads and boots firmware
+on the Qualcomm WCNSS core.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,riva-pil",
+ "qcom,pronto-v1-pil",
+ "qcom,pronto-v2-pil"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: must specify the base address and size of the CCU, DXE and
+ PMU register blocks
+
+- reg-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "ccu", "dxe", "pmu"
+
+- interrupts-extended:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: must list the watchdog and fatal IRQs and may specify the
+ ready, handover and stop-ack IRQs
+
+- interrupt-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: should be "wdog", "fatal", optionally followed by "ready",
+ "handover", "stop-ack"
+
+- vddmx-supply:
+- vddcx-supply:
+- vddpx-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: reference to the regulators to be held on behalf of the
+ booting of the WCNSS core
+
+- qcom,smem-states:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: reference to the SMEM state used to indicate to WCNSS that
+ it should shut down
+
+- qcom,smem-state-names:
+ Usage: optional
+ Value type: <stringlist>
+ Definition: should be "stop"
+
+- memory-region:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to reserved-memory node for the remote processor
+ see ../reserved-memory/reserved-memory.txt
+
+= SUBNODES
+A single subnode of the WCNSS PIL describes the attached rf module and its
+resource dependencies.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,wcn3620",
+ "qcom,wcn3660",
+ "qcom,wcn3680"
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the xo clock and optionally the rf clock
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: should be "xo", optionally followed by "rf"
+
+- vddxo-supply:
+- vddrfa-supply:
+- vddpa-supply:
+- vdddig-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: reference to the regulators to be held on behalf of the
+ booting of the WCNSS core
+
+= EXAMPLE
+The following example describes the resources needed to boot control the WCNSS,
+with attached WCN3680, as it is commonly found on MSM8974 boards.
+
+pronto@...04000 {
+ compatible = "qcom,pronto-v2-pil";
+ reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ interrupts-extended = <&intc 0 149 1>,
+ <&wcnss_smp2p_slave 0 0>,
+ <&wcnss_smp2p_slave 1 0>,
+ <&wcnss_smp2p_slave 2 0>,
+ <&wcnss_smp2p_slave 3 0>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ vddmx-supply = <&pm8841_s1>;
+ vddcx-supply = <&pm8841_s2>;
+ vddpx-supply = <&pm8941_s3>;
+
+ qcom,smem-states = <&wcnss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ memory-region = <&wcnss_region>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcnss_pin_a>;
+
+ iris {
+ compatible = "qcom,wcn3680";
+
+ clocks = <&rpmcc RPM_CXO_CLK_SRC>, <&rpmcc RPM_CXO_A2>;
+ clock-names = "xo", "rf";
+
+ vddxo-supply = <&pm8941_l6>;
+ vddrfa-supply = <&pm8941_l11>;
+ vddpa-supply = <&pm8941_l19>;
+ vdddig-supply = <&pm8941_s3>;
+ };
+};
--
2.5.0
Powered by blists - more mailing lists