[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c0b25215-b11a-c4bc-fa08-dbd55470daa7@xs4all.nl>
Date: Sat, 13 Aug 2016 20:46:58 +0200
From: Hans Verkuil <hverkuil@...all.nl>
To: Robert Jarzmik <robert.jarzmik@...e.fr>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Guennadi Liakhovetski <g.liakhovetski@....de>,
Jiri Kosina <trivial@...nel.org>
Cc: linux-kernel@...r.kernel.org, linux-media@...r.kernel.org
Subject: Re: [PATCH v3 12/14] media: platform: pxa_camera: add debug register
access
On 08/08/2016 09:30 PM, Robert Jarzmik wrote:
> Add pxa_camera registers access through advanced video debugging.
>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@...e.fr>
> ---
> drivers/media/platform/soc_camera/pxa_camera.c | 57 ++++++++++++++++++++++++++
> 1 file changed, 57 insertions(+)
>
> diff --git a/drivers/media/platform/soc_camera/pxa_camera.c b/drivers/media/platform/soc_camera/pxa_camera.c
> index 1e15734ae287..20340489e07e 100644
> --- a/drivers/media/platform/soc_camera/pxa_camera.c
> +++ b/drivers/media/platform/soc_camera/pxa_camera.c
> @@ -1344,6 +1344,58 @@ static int pxa_camera_check_frame(u32 width, u32 height)
> (width & 0x01);
> }
>
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> +static int pxac_vidioc_g_register(struct file *file, void *priv,
> + struct v4l2_dbg_register *reg)
> +{
> + struct pxa_camera_dev *pcdev = video_drvdata(file);
> +
> + if (reg->reg > CIBR2)
> + return -ERANGE;
> +
> + reg->val = __raw_readl(pcdev->base + reg->reg);
> + reg->size = sizeof(__u32);
> + return 0;
> +}
> +
> +static int pxac_vidioc_s_register(struct file *file, void *priv,
> + const struct v4l2_dbg_register *reg)
> +{
> + struct pxa_camera_dev *pcdev = video_drvdata(file);
> +
> + if (reg->reg > CIBR2)
> + return -ERANGE;
> + if (reg->size != sizeof(__u32))
> + return -EINVAL;
> + __raw_writel(reg->val, pcdev->base + reg->reg);
> + return 0;
> +}
> +
> +static int pxac_vidioc_g_chip_info(struct file *file, void *fh,
> + struct v4l2_dbg_chip_info *chip)
> +{
> + struct pxa_camera_dev *pcdev = video_drvdata(file);
> +
> + switch (chip->match.type) {
> + case V4L2_CHIP_MATCH_BRIDGE:
> + if (chip->match.addr > 0)
> + return -EINVAL;
> +
> + strlcpy(chip->name, "pxa-camera", sizeof(chip->name));
> + return 0;
> + case V4L2_CHIP_MATCH_SUBDEV:
> + if (chip->match.addr > 0)
> + return -EINVAL;
> +
> + strlcpy(chip->name, pcdev->sensor->name, sizeof(chip->name));
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
You shouldn't need this g_chip_info function, it should be handled automatically
by the v4l2 core. Just drop it.
> +
> +#endif
> +
> static int pxac_vidioc_enum_fmt_vid_cap(struct file *filp, void *priv,
> struct v4l2_fmtdesc *f)
> {
> @@ -1594,6 +1646,11 @@ static const struct v4l2_ioctl_ops pxa_camera_ioctl_ops = {
> .vidioc_expbuf = vb2_ioctl_expbuf,
> .vidioc_streamon = vb2_ioctl_streamon,
> .vidioc_streamoff = vb2_ioctl_streamoff,
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> + .vidioc_g_register = pxac_vidioc_g_register,
> + .vidioc_s_register = pxac_vidioc_s_register,
> + .vidioc_g_chip_info = pxac_vidioc_g_chip_info,
> +#endif
> };
>
> static struct v4l2_clk_ops pxa_camera_mclk_ops = {
>
Regards,
Hans
Powered by blists - more mailing lists