[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20160815121740.29515-8-lee.jones@linaro.org>
Date: Mon, 15 Aug 2016 13:17:40 +0100
From: Lee Jones <lee.jones@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: kernel@...inux.com, patrice.chotard@...com, arm@...nel.org,
Lee Jones <lee.jones@...aro.org>
Subject: [PATCH 7/7] ARM: dts: STi: Introduce B2260 board
From: Patrice Chotard <patrice.chotard@...com>
B2260 board is the STMicroelectronics 96Board
based on STiH410 soc :
- 1GB DDR
- On-Board USB combo WiFi/Bluetooth RTL8723BU
with PCB soldered antenna
- Ethernet 1000-BaseT
- Sata
- HDMI
- 2 x USB2 type A
- micro USB2 type AB
- SD card slot
- High speed connector (SD/I2C/USB interfaces)
- Slow speed connector (UART/I2C/GPIO/SPI/PCM interfaces)
Signed-off-by: Patrice Chotard <patrice.chotard@...com>
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/stih410-b2260.dts | 190 ++++++++++++++++++++++++++++++++++++
2 files changed, 191 insertions(+)
create mode 100644 arch/arm/boot/dts/stih410-b2260.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faacd52..f23a5b3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -686,6 +686,7 @@ dtb-$(CONFIG_ARCH_SPEAR6XX) += \
dtb-$(CONFIG_ARCH_STI) += \
stih407-b2120.dtb \
stih410-b2120.dtb \
+ stih410-b2260.dtb \
stih415-b2000.dtb \
stih415-b2020.dtb \
stih416-b2000.dtb \
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
new file mode 100644
index 0000000..94e064f
--- /dev/null
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 2016 STMicroelectronics (R&D) Limited.
+ * Author: Patrice Chotard <patrice.chotard@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih410.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "STiH410 B2260";
+ compatible = "st,stih410-b2260", "st,stih410";
+
+ chosen {
+ bootargs = "console=ttyAS1,115200";
+ linux,stdout-path = &uart1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x40000000>;
+ };
+
+ aliases {
+ ttyAS1 = &uart1;
+ ethernet0 = ðernet0;
+ };
+
+ soc {
+
+ leds {
+ compatible = "gpio-leds";
+ user_green_1 {
+ label = "User_green_1";
+ gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ user_green_2 {
+ label = "User_green_2";
+ gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ user_green_3 {
+ label = "User_green_3";
+ gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ user_green_4 {
+ label = "User_green_4";
+ gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ /* Low speed expansion connector */
+ uart0: serial@...0000 {
+ label = "LS-UART0";
+ status = "okay";
+ };
+
+ /* Low speed expansion connector */
+ uart1: serial@...1000 {
+ label = "LS-UART1";
+ status = "okay";
+ };
+
+ /* Low speed expansion connector */
+ spi0: spi@...4000 {
+ label = "LS-SPI0";
+ cs-gpio = <&pio30 3 0>;
+ status = "okay";
+ };
+
+ /* Low speed expansion connector */
+ i2c0: i2c@...0000 {
+ label = "LS-I2C0";
+ status = "okay";
+ };
+
+ /* Low speed expansion connector */
+ i2c1: i2c@...1000 {
+ label = "LS-I2C1";
+ status = "okay";
+ };
+
+ /* high speed expansion connector */
+ i2c2: i2c@...2000 {
+ label = "HS-I2C2";
+ pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
+ status = "okay";
+ };
+
+ /* high speed expansion connector */
+ i2c3: i2c@...3000 {
+ label = "HS-I2C3";
+ pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
+ status = "okay";
+ };
+
+ mmc0: sdhci@...60000 {
+ pinctrl-0 = <&pinctrl_sd0>;
+ bus-width = <4>;
+ status = "okay";
+ };
+
+ /* high speed expansion connector */
+ mmc1: sdhci@...80000 {
+ status = "okay";
+ };
+
+ pwm0: pwm@...0000 {
+ status = "okay";
+ };
+
+ pwm1: pwm@...0000 {
+ status = "okay";
+ };
+
+ usb2_picophy1: phy2 {
+ status = "okay";
+ };
+
+ usb2_picophy2: phy3 {
+ status = "okay";
+ };
+
+ ohci0: usb@...3c00 {
+ status = "okay";
+ };
+
+ ehci0: usb@...3e00 {
+ status = "okay";
+ };
+
+ ohci1: usb@...3c00 {
+ status = "okay";
+ };
+
+ ehci1: usb@...3e00 {
+ status = "okay";
+ };
+
+ ethernet0: dwmac@...0000 {
+ phy-mode = "rgmii";
+ pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
+
+ snps,phy-bus-name = "stmmac";
+ snps,phy-bus-id = <0>;
+ snps,phy-addr = <0>;
+ snps,reset-gpio = <&pio0 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+
+ status = "okay";
+ };
+
+ /* SSC11 to HDMI */
+ hdmiddc: i2c@...1000 {
+ /* HDMI V1.3a supports Standard mode only */
+ clock-frequency = <100000>;
+ st,i2c-min-scl-pulse-width-us = <0>;
+ st,i2c-min-sda-pulse-width-us = <5>;
+ status = "okay";
+ };
+
+ sti-display-subsystem {
+ sti_hdmi: sti-hdmi@...4000 {
+ status = "okay";
+ };
+ };
+
+ miphy28lp_phy: miphy28lp@...2000 {
+
+ phy_port1: port@...a000 {
+ st,osc-force-ext;
+ };
+ };
+
+ sata1: sata@...8000 {
+ status = "okay";
+ };
+ };
+};
--
2.9.0
Powered by blists - more mailing lists