Message-ID: <14a70eac-eed6-426f-d22d-ccc79ccf5ebb@kernel.org>
Date:	Mon, 15 Aug 2016 18:25:44 +0100
From:	Jonathan Cameron <jic23@...nel.org>
To:	Florian Lobmaier <Florian.Lobmaier@....com>,
	Peter Meerwald-Stadler <pmeerw@...erw.net>
Cc:	Elitsa Polizoeva <Elitsa.Polizoeva@....com>,
	"knaack.h@....de" <knaack.h@....de>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
	Lars-Peter Clausen <lars@...afoo.de>,
	Guenter Roeck <linux@...ck-us.net>,
	Jean Delvare <jdelvare@...e.de>, linux-hwmon@...r.kernel.org
Subject: Re: [PATCH V4 1/1] iio: as6200: add AS6200 temperature sensor driver
 from ams AG

On 04/08/16 09:35, Florian Lobmaier wrote:
> Hello Peter,
> 
> Thanks again for your valuable feedback. We use now IIO_EV_THRESH to
> set high and low limits for temperature. Also removed all the custom
> ABI as this are mainly settings which will be set one-time only. For
> the removed custom ABI init defines where introduced which will be
> written to the registers in the probe function. The remaining custom
> ABI is now documented as well as the device tree bindings.> 
> Br,
> Florian
> 
> Signed-off-by: Florian Lobmaier <florian.lobmaier@....com>
> Signed-off-by: Elitsa Polizoeva <elitsa.polizoeva@....com>
Please post as a fresh email thread with a clean title. Otherwise
people will assume it is simply a reply to a comment on an earlier
version.  Also don't include earlier versions as you have here!

i.e. drop the RE from the title as it's confusing!

Anyhow, right back at v1 Peter mentioned that this might be more
suitable as a hwmon driver than an IIO one.  If you have a good reason
for supporting this part via IIO you should put it in the patch
description. I'm afraid I've been more or less offline for the last
couple fo weeks or I'd have highlighted that this question was
important. A superficial look suggest to me that this is definitely
a part targeting hardware monitoring applications.

I'll only take a border line part with agreement form Guenter / Jean
who are the hwmon maintainers.

I'll do a quick review ignoring this question.
Mostly pretty good though I really don't like the remaining
custom ABI. Can't see a reason for its existence.

Jonathan
> ---
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-temperature-as6200.txt b/Documentation/ABI/testing/sysfs-bus-iio-temperature-as6200.txt
> new file mode 100644
> index 0000000..0dfad7e
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-temperature-as6200.txt
> @@ -0,0 +1,8 @@
> +What		/sys/bus/iio/devices/iio:deviceX/al
'alert' at the very least.
> +Date:		August 2016
> +KernelVersion:	4.3
> +Contact:	Florian Lobmaier <florian.lobmaier@....com>
> +Description:
> +		Get the current status of the alert bit in the configuration
> +		register of the AS6200.
> +		on/off
Why?  Just use the events accesses to wait for it.

> diff --git a/Documentation/devicetree/bindings/iio/temperature/as6200.txt b/Documentation/devicetree/bindings/iio/temperature/as6200.txt
> new file mode 100644
> index 0000000..bfd2b5f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/temperature/as6200.txt
> @@ -0,0 +1,20 @@
> +ams AG AS6200 temperature sensor driver
> +
> +Required properties:
> +	- compatible: must be "ams,as6200"
> +	- reg: I2C 7-bit address for the device
> +		possible values: 0x48, 0x49, 0x4a, 0x4b
> +	- interrupt-parent: should be the phandle for the interrupt controller
> +	- interrupts: the sole interrupt generated by the device
> +
> +	Refer to interrupt-controller/interrupts.txt for generic
> +	interrupt client node bindings.
> +
> +Example:
> +
> +as6200@...b {
> +	compatible = "ams,as6200";
> +	reg = <0x4b>;
> +	interrupt-parent = <&gpio>;
> +	interrupts = <4 1>;
> +};
> diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
> index 21feaa4..d82e80f 100644
> --- a/drivers/iio/temperature/Kconfig
> +++ b/drivers/iio/temperature/Kconfig
> @@ -3,6 +3,17 @@
>  #
>  menu "Temperature sensors"
>  
> +config AS6200
> +	tristate "ams AG AS6200 temperature sensor"
> +	depends on I2C
> +	select REGMAP_I2C
> +	help
> +	  If you say yes here you get support for the AS6200 temperature
> +	  sensor from ams AG.
> +
> +	  This driver can also be built as a module. If so, the module will
> +	  be called as6200.
> +
>  config MLX90614
>  	tristate "MLX90614 contact-less infrared sensor"
>  	depends on I2C
> diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
> index 40710a8..c0c9a9a 100644
> --- a/drivers/iio/temperature/Makefile
> +++ b/drivers/iio/temperature/Makefile
> @@ -2,5 +2,6 @@
>  # Makefile for industrial I/O temperature drivers
>  #
>  
> +obj-$(CONFIG_AS6200) += as6200.o
>  obj-$(CONFIG_MLX90614) += mlx90614.o
>  obj-$(CONFIG_TMP006) += tmp006.o
> diff --git a/drivers/iio/temperature/as6200.c b/drivers/iio/temperature/as6200.c
> new file mode 100644
> index 0000000..9bcab1d
> --- /dev/null
> +++ b/drivers/iio/temperature/as6200.c
> @@ -0,0 +1,492 @@
> +/*
> + * Driver for ams AS6200 temperature sensor.
> + *
> + * Sensor supports following 7-bit I2C addresses: 0x48, 0x49, 0x4A, 0x4B
> + *
> + * Copyright (c) 2016 ams AG. All rights reserved.
> + *
> + * Author: Florian Lobmaier <florian.lobmaier@....com>
> + * Author: Elitsa Polizoeva <elitsa.polizoeva@....com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
> + */
> +
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/err.h>
> +#include <linux/types.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <linux/of_gpio.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/events.h>
> +#include <linux/regmap.h>
> +
> +static const int as6200_conv_rates[4][2] = { {4, 0}, {1, 0},
> +					{0, 250000}, {0, 125000} };
> +
> +/* AS6200 registers */
> +#define AS6200_REG_TVAL		0x00
> +#define AS6200_REG_CONFIG	0x01
> +#define AS6200_REG_TLOW		0x02
> +#define AS6200_REG_THIGH	0x03
> +#define AS6200_MAX_REGISTER	0x03
> +
> +#define AS6200_CONFIG_AL_MASK	BIT(5)
> +#define AS6200_CONFIG_AL_SHIFT	5
> +#define AS6200_CONFIG_CR_MASK	GENMASK(7, 6)
> +#define AS6200_CONFIG_CR_SHIFT	6
> +#define AS6200_CONFIG_SM_MASK   BIT(8)
> +#define AS6200_CONFIG_SM_SHIFT  8
> +#define AS6200_CONFIG_IM_MASK	BIT(9)
> +#define AS6200_CONFIG_IM_SHIFT	9
> +#define AS6200_CONFIG_POL_MASK	BIT(10)
> +#define AS6200_CONFIG_POL_SHIFT	10
> +#define AS6200_CONFIG_CF_MASK	GENMASK(12, 11)
> +#define AS6200_CONFIG_CF_SHIFT	11
> +
> +/* AS6200 init configuration values */
> +#define AS6200_CONFIG_INIT_IM		0x0
> +#define AS6200_CONFIG_INIT_POL	0x0
> +#define AS6200_CONFIG_INIT_CF		0x2
> +
> +struct as6200_data {
> +	struct i2c_client *client;
> +	struct regmap *regmap;
> +};
> +
> +static const struct regmap_range as6200_readable_ranges[] = {
> +	regmap_reg_range(AS6200_REG_TVAL, AS6200_REG_THIGH),
> +};
> +
> +static const struct regmap_access_table as6200_readable_table = {
> +	.yes_ranges = as6200_readable_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(as6200_readable_ranges),
> +};
> +
> +static const struct regmap_range as6200_writable_ranges[] = {
> +	regmap_reg_range(AS6200_REG_CONFIG, AS6200_REG_THIGH),
> +};
> +
> +static const struct regmap_access_table as6200_writable_table = {
> +	.yes_ranges = as6200_writable_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(as6200_writable_ranges),
> +};
> +
> +static const struct regmap_range as6200_volatile_ranges[] = {
> +	regmap_reg_range(AS6200_REG_TVAL, AS6200_REG_TVAL),
> +};
> +
> +static const struct regmap_access_table as6200_volatile_table = {
> +	.yes_ranges = as6200_volatile_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(as6200_volatile_ranges),
> +};
> +
> +static const struct regmap_config as6200_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 16,
> +	.max_register = AS6200_MAX_REGISTER,
> +	.cache_type = REGCACHE_RBTREE,
> +	.rd_table = &as6200_readable_table,
> +	.wr_table = &as6200_writable_table,
> +	.volatile_table = &as6200_volatile_table,
> +};
> +
> +static int as6200_read_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *channel, int *val,
> +			    int *val2, long mask)
> +{
> +	struct as6200_data *data = iio_priv(indio_dev);
> +	unsigned int reg_val;
> +	int cr, err;
> +	s32 ret;
> +
> +	if (channel->type != IIO_TEMP)
> +		return -EINVAL;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +	case IIO_CHAN_INFO_PROCESSED:
> +		err = regmap_read(data->regmap, AS6200_REG_TVAL,
> +					&reg_val);
> +		if (err < 0)
> +			return err;
> +		ret = sign_extend32(reg_val, 15) >> 4;
> +		if (mask == IIO_CHAN_INFO_PROCESSED)
> +			*val = (ret * 625) / 10000;
> +		else
> +			*val = ret;
> +		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = 62;
> +		*val2 = 500000;
> +		return IIO_VAL_INT_PLUS_MICRO;
> +	case IIO_CHAN_INFO_SAMP_FREQ:
> +		err = regmap_read(data->regmap, AS6200_REG_CONFIG,
> +					&reg_val);
> +		if (err < 0)
> +			return err;
> +		cr = (reg_val & AS6200_CONFIG_CR_MASK)
> +			>> AS6200_CONFIG_CR_SHIFT;
> +		*val = as6200_conv_rates[cr][0];
> +		*val2 = as6200_conv_rates[cr][1];
> +		return IIO_VAL_INT_PLUS_MICRO;
> +	default:
> +		break;
> +	}
> +	return -EINVAL;
> +}
> +
> +static int as6200_write_raw(struct iio_dev *indio_dev,
> +			struct iio_chan_spec const *chan,
> +			int val,
> +			int val2,
> +			long mask)
> +{
> +	struct as6200_data *data = iio_priv(indio_dev);
> +	int i;
> +	unsigned int config_val;
> +	int err;
> +
> +	if (mask != IIO_CHAN_INFO_SAMP_FREQ)
> +		return -EINVAL;
> +
> +	for (i = 0; i < ARRAY_SIZE(as6200_conv_rates); i++)
> +		if ((val == as6200_conv_rates[i][0]) &&
> +			(val2 == as6200_conv_rates[i][1])) {
> +			err = regmap_read(data->regmap,
> +				AS6200_REG_CONFIG, &config_val);
> +			if (err < 0)
> +				return err;
> +			config_val &= ~AS6200_CONFIG_CR_MASK;
> +			config_val |= i << AS6200_CONFIG_CR_SHIFT;
> +
> +			return regmap_write(data->regmap, AS6200_REG_CONFIG,
> +							config_val);
> +		}
> +	return -EINVAL;
> +}
> +
> +static int as6200_read_thresh(struct iio_dev *indio_dev,
> +			const struct iio_chan_spec *chan,
> +			enum iio_event_type type,
> +			enum iio_event_direction dir,
> +			enum iio_event_info info,
> +			int *val, int *val2)
> +{
> +	struct as6200_data *data = iio_priv(indio_dev);
> +	int ret;
> +	u32 reg_val;
> +
> +	dev_info(&data->client->dev, "read thresh called\n");
> +	if (dir == IIO_EV_DIR_RISING)
> +		ret = regmap_read(data->regmap, AS6200_REG_THIGH, &reg_val);
> +	else
> +		ret = regmap_read(data->regmap, AS6200_REG_TLOW, &reg_val);
> +
> +	*val = sign_extend32(reg_val, 15) >> 4;
> +
> +	if (ret)
> +		return ret;
> +	return IIO_VAL_INT;
> +}
> +
> +static int as6200_write_thresh(struct iio_dev *indio_dev,
> +			const struct iio_chan_spec *chan,
> +			enum iio_event_type type,
> +			enum iio_event_direction dir,
> +			enum iio_event_info info,
> +			int val, int val2)
> +{
> +	struct as6200_data *data = iio_priv(indio_dev);
> +	int ret;
> +	s16 value = val << 4;
> +
> +	dev_info(&data->client->dev, "write thresh called %d\n", value);
> +	if (dir == IIO_EV_DIR_RISING)
> +		ret = regmap_write(data->regmap, AS6200_REG_THIGH, value);
> +	else
> +		ret = regmap_write(data->regmap, AS6200_REG_TLOW, value);
> +	return ret;
> +}
> +
> +static irqreturn_t as6200_alert_isr(int irq, void *dev_id)
> +{
> +	struct iio_dev *indio_dev = dev_id;
> +
> +	iio_push_event(indio_dev,
> +		IIO_UNMOD_EVENT_CODE(IIO_TEMP,
> +					0,
> +					IIO_EV_TYPE_THRESH,
> +					IIO_EV_DIR_EITHER),
> +					iio_get_time_ns());
> +	return IRQ_HANDLED;
> +}
> +
> +static int as6200_init(struct iio_dev *indio_dev)
> +{
> +	struct as6200_data *data = iio_priv(indio_dev);
> +	int err;
> +
> +	err = regmap_update_bits(data->regmap, AS6200_REG_CONFIG,
> +			AS6200_CONFIG_IM_MASK,
> +			AS6200_CONFIG_INIT_IM << AS6200_CONFIG_IM_SHIFT);
> +	if (err < 0)
> +		return err;
> +	err = regmap_update_bits(data->regmap, AS6200_REG_CONFIG,
> +			AS6200_CONFIG_POL_MASK,
> +			AS6200_CONFIG_INIT_POL << AS6200_CONFIG_POL_SHIFT);
> +	if (err < 0)
> +		return err;
> +	err = regmap_update_bits(data->regmap, AS6200_REG_CONFIG,
> +			AS6200_CONFIG_CF_MASK,
> +			AS6200_CONFIG_INIT_CF << AS6200_CONFIG_CF_SHIFT);
> +	if (err < 0)
> +		return err;
> +
> +	return err;
> +}
> +
> +static int as6200_setup_irq(struct iio_dev *indio_dev)
> +{
> +	int err;
> +	struct as6200_data *data = iio_priv(indio_dev);
> +	struct device *dev = &data->client->dev;
> +	int irq_trig;
> +	unsigned int reg_val;
> +	bool pol;
> +
> +	err = regmap_read(data->regmap, AS6200_REG_CONFIG, &reg_val);
> +	if (err < 0)
> +		return err;
> +
> +	pol = (reg_val & AS6200_CONFIG_POL_MASK) >> AS6200_CONFIG_POL_SHIFT;
> +	if (pol)
> +		irq_trig = IRQF_TRIGGER_RISING;
> +	else
> +		irq_trig = IRQF_TRIGGER_FALLING;
> +
> +	err = request_irq(data->client->irq, as6200_alert_isr, irq_trig,
> +			"as6200", dev);
> +	if (err)
> +		dev_err(dev, "error requesting irq %d\n", err);
> +
> +	return err;
> +}
> +
> +static int as6200_sleep(struct as6200_data *data)
> +{
> +	return regmap_update_bits(data->regmap, AS6200_REG_CONFIG,
> +			AS6200_CONFIG_SM_MASK,
> +			1 << AS6200_CONFIG_SM_SHIFT);
> +}
> +
> +static int as6200_wakeup(struct as6200_data *data)
> +{
> +	return regmap_update_bits(data->regmap, AS6200_REG_CONFIG,
> +			AS6200_CONFIG_SM_MASK,
> +			0 << AS6200_CONFIG_SM_SHIFT);
> +}
> +
> +static ssize_t as6200_show_al(struct device *dev,
> +	struct device_attribute *attr, char *buf)
> +{
> +	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> +	struct as6200_data *data = iio_priv(indio_dev);
> +	unsigned int reg_val;
> +	int err;
> +	bool pol, al;
> +
> +	err = regmap_read(data->regmap, AS6200_REG_CONFIG, &reg_val);
> +	if (err < 0)
> +		return err;
> +	pol = (reg_val & AS6200_CONFIG_POL_MASK) >> AS6200_CONFIG_POL_SHIFT;
> +	al = (reg_val & AS6200_CONFIG_AL_MASK) >> AS6200_CONFIG_AL_SHIFT;
> +	if (pol) {
> +		if (al)
> +			return sprintf(buf, "on\n");
> +		else
> +			return sprintf(buf, "off\n");
> +	} else {
> +		if (al)
> +			return sprintf(buf, "off\n");
> +		else
> +			return sprintf(buf, "on\n");
> +	}
> +}
> +
> +static IIO_DEVICE_ATTR(al, S_IRUGO, as6200_show_al, NULL, 0);
al? That's a somewhat brief name for an attibute!
> +
> +static IIO_CONST_ATTR(sampling_frequency_available, "4 1 0.25 0.125");
> +
> +static struct attribute *as6200_attrs[] = {
> +	&iio_dev_attr_al.dev_attr.attr,
> +	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group as6200_attr_group = {
> +	.attrs = as6200_attrs,
> +};
> +
> +static const struct iio_event_spec as6200_events[] = {
> +	{
> +		.type = IIO_EV_TYPE_THRESH,
> +		.dir = IIO_EV_DIR_RISING,
> +		.mask_separate = BIT(IIO_EV_INFO_VALUE),
> +	}, {
> +		.type = IIO_EV_TYPE_THRESH,
> +		.dir = IIO_EV_DIR_FALLING,
> +		.mask_separate = BIT(IIO_EV_INFO_VALUE),
Would expect to normally see an enable attribute here as well..
Is it not possible to disable the events?
> +	}
> +};
> +
> +static const struct iio_chan_spec as6200_channels[] = {
> +	{
> +		.type = IIO_TEMP,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +			BIT(IIO_CHAN_INFO_PROCESSED) |
> +			BIT(IIO_CHAN_INFO_SCALE),
> +		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> +		.event_spec = as6200_events,
> +		.num_event_specs = ARRAY_SIZE(as6200_events),
> +	}
> +};
> +
> +static const struct iio_info as6200_info = {
> +	.read_raw = as6200_read_raw,
> +	.write_raw = as6200_write_raw,
> +	.read_event_value = as6200_read_thresh,
> +	.write_event_value = as6200_write_thresh,
> +	.attrs = &as6200_attr_group,
> +	.driver_module = THIS_MODULE,
> +};
> +
> +static int as6200_i2c_probe(struct i2c_client *client,
> +	const struct i2c_device_id *id)
> +{
> +	struct iio_dev *indio_dev;
> +	struct as6200_data *data;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	data = iio_priv(indio_dev);
> +	i2c_set_clientdata(client, indio_dev);
> +	data->client = client;
> +
> +	data->regmap = devm_regmap_init_i2c(client, &as6200_regmap_config);
> +	if (IS_ERR(data->regmap)) {
> +		ret = PTR_ERR(data->regmap);
> +		dev_err(&client->dev, "regmap init failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	indio_dev->dev.parent = &client->dev;
> +	indio_dev->name = id->name;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->info = &as6200_info;
> +	indio_dev->channels = as6200_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(as6200_channels);
> +
> +	ret = as6200_init(indio_dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = as6200_setup_irq(indio_dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = iio_device_register(indio_dev);
> +	if (ret < 0)
> +		goto cleanup_irq;
> +
> +	return 0;
> +
> +cleanup_irq:
> +	free_irq(client->irq, &client->dev);
> +
> +	return ret;
> +}
> +
> +static int as6200_i2c_remove(struct i2c_client *client)
> +{
> +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +
> +	iio_device_unregister(indio_dev);
> +	if (client->irq > 0)
> +		free_irq(client->irq, &client->dev);
> +	return 0;
> +}
> +
> +static const struct of_device_id as6200_of_match[] = {
> +	{ .compatible = "ams,as6200", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, as6200_of_match);
> +
> +static const struct i2c_device_id as6200_i2c_id[] = {
> +	{ "as6200", 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, as6200_i2c_id);
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int as6200_pm_suspend(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> +	struct as6200_data *data = iio_priv(indio_dev);
> +
> +	return as6200_sleep(data);
The sleep function is only used here, I'd just have the content inline here
and drop the separate function.
> +}
> +
> +static int as6200_pm_resume(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> +	struct as6200_data *data = iio_priv(indio_dev);
> +
> +	return as6200_wakeup(data);
Same suggestion as for sleep above.
> +}
> +#endif
> +
> +static const struct dev_pm_ops as6200_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(as6200_pm_suspend, as6200_pm_resume)
> +};
> +
> +static struct i2c_driver as6200_i2c_driver = {
> +	.driver = {
> +		.name = "as6200",
> +		.owner = THIS_MODULE,
> +		.of_match_table = as6200_of_match,
> +		.pm = &as6200_pm_ops,
> +	},
> +	.probe = as6200_i2c_probe,
> +	.remove = as6200_i2c_remove,
> +	.id_table = as6200_i2c_id,
> +};
> +
> +module_i2c_driver(as6200_i2c_driver);
> +
> +MODULE_DESCRIPTION("ams AS6200 temperature sensor");
> +MODULE_AUTHOR("Florian Lobmaier <florian.lobmaier@....com>");
> +MODULE_AUTHOR("Elitsa Polizoeva <elitsa.polizoeva@....com>");
> +MODULE_LICENSE("GPL");
> 

<cut stuff that should never have been here>

Powered by blists - more mailing lists