| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20160816093508.28307-9-lee.jones@linaro.org>
Date: Tue, 16 Aug 2016 10:34:59 +0100
From: Lee Jones <lee.jones@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: kernel@...inux.com, patrice.chotard@...com,
thierry.reding@...il.com, linux-pwm@...r.kernel.org,
devicetree@...r.kernel.org, Lee Jones <lee.jones@...aro.org>
Subject: [PATCH v4 08/17] pwm: sti: Reorganise register names in preparation for new functionality
Exciting functionality is on the way to this device. But
before we can add it, we need to do some basic housekeeping
so the additions can be added cleanly.
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
drivers/pwm/pwm-sti.c | 76 +++++++++++++++++++++++++++------------------------
1 file changed, 41 insertions(+), 35 deletions(-)
diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c
index 5c7fdd1..246df77 100644
--- a/drivers/pwm/pwm-sti.c
+++ b/drivers/pwm/pwm-sti.c
@@ -21,18 +21,22 @@
#include <linux/slab.h>
#include <linux/time.h>
-#define STI_DS_REG(ch) (4 * (ch)) /* Device's Duty Cycle register */
-#define STI_PWMCR 0x50 /* Control/Config register */
-#define STI_INTEN 0x54 /* Interrupt Enable/Disable register */
+#define PWM_OUT_VAL(x) (0x00 + (4 * (x))) /* Device's Duty Cycle register */
+
+#define STI_PWM_CTRL 0x50 /* Control/Config register */
+#define STI_INT_EN 0x54 /* Interrupt Enable/Disable register */
#define PWM_PRESCALE_LOW_MASK 0x0f
#define PWM_PRESCALE_HIGH_MASK 0xf0
/* Regfield IDs */
enum {
+ /* Bits in PWM_CTRL*/
PWMCLK_PRESCALE_LOW,
PWMCLK_PRESCALE_HIGH,
- PWM_EN,
- PWM_INT_EN,
+
+ PWM_OUT_EN,
+
+ PWM_CPT_INT_EN,
/* Keep last */
MAX_REGFIELDS
@@ -47,14 +51,14 @@ struct sti_pwm_compat_data {
struct sti_pwm_chip {
struct device *dev;
- struct clk *clk;
unsigned long clk_rate;
+ struct clk *pwm_clk;
struct regmap *regmap;
struct sti_pwm_compat_data *cdata;
struct regmap_field *prescale_low;
struct regmap_field *prescale_high;
- struct regmap_field *pwm_en;
- struct regmap_field *pwm_int_en;
+ struct regmap_field *pwm_out_en;
+ struct regmap_field *pwm_cpt_int_en;
struct pwm_chip chip;
struct pwm_device *cur;
unsigned long configured;
@@ -64,10 +68,10 @@ struct sti_pwm_chip {
};
static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = {
- [PWMCLK_PRESCALE_LOW] = REG_FIELD(STI_PWMCR, 0, 3),
- [PWMCLK_PRESCALE_HIGH] = REG_FIELD(STI_PWMCR, 11, 14),
- [PWM_EN] = REG_FIELD(STI_PWMCR, 9, 9),
- [PWM_INT_EN] = REG_FIELD(STI_INTEN, 0, 0),
+ [PWMCLK_PRESCALE_LOW] = REG_FIELD(STI_PWM_CTRL, 0, 3),
+ [PWMCLK_PRESCALE_HIGH] = REG_FIELD(STI_PWM_CTRL, 11, 14),
+ [PWM_OUT_EN] = REG_FIELD(STI_PWM_CTRL, 9, 9),
+ [PWM_CPT_INT_EN] = REG_FIELD(STI_INT_EN, 1, 4),
};
static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip)
@@ -144,7 +148,7 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) ||
((ncfg > 1) && period_same)) {
/* Enable clock before writing to PWM registers. */
- ret = clk_enable(pc->clk);
+ ret = clk_enable(pc->pwm_clk);
if (ret)
return ret;
@@ -174,11 +178,12 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
*/
pwmvalx = cdata->max_pwm_cnt * duty_ns / period_ns;
- ret = regmap_write(pc->regmap, STI_DS_REG(pwm->hwpwm), pwmvalx);
+ ret = regmap_write(pc->regmap,
+ PWM_OUT_VAL(pwm->hwpwm), pwmvalx);
if (ret)
goto clk_dis;
- ret = regmap_field_write(pc->pwm_int_en, 0);
+ ret = regmap_field_write(pc->pwm_cpt_int_en, 0);
set_bit(pwm->hwpwm, &pc->configured);
pc->cur = pwm;
@@ -190,7 +195,7 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
}
clk_dis:
- clk_disable(pc->clk);
+ clk_disable(pc->pwm_clk);
return ret;
}
@@ -206,11 +211,11 @@ static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
*/
mutex_lock(&pc->sti_pwm_lock);
if (!pc->en_count) {
- ret = clk_enable(pc->clk);
+ ret = clk_enable(pc->pwm_clk);
if (ret)
goto out;
- ret = regmap_field_write(pc->pwm_en, 1);
+ ret = regmap_field_write(pc->pwm_out_en, 1);
if (ret) {
dev_err(dev, "failed to enable PWM device:%d\n",
pwm->hwpwm);
@@ -232,9 +237,9 @@ static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
mutex_unlock(&pc->sti_pwm_lock);
return;
}
- regmap_field_write(pc->pwm_en, 0);
+ regmap_field_write(pc->pwm_out_en, 0);
- clk_disable(pc->clk);
+ clk_disable(pc->pwm_clk);
mutex_unlock(&pc->sti_pwm_lock);
}
@@ -277,15 +282,16 @@ static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
if (IS_ERR(pc->prescale_high))
return PTR_ERR(pc->prescale_high);
- pc->pwm_en = devm_regmap_field_alloc(dev, pc->regmap,
- reg_fields[PWM_EN]);
- if (IS_ERR(pc->pwm_en))
- return PTR_ERR(pc->pwm_en);
- pc->pwm_int_en = devm_regmap_field_alloc(dev, pc->regmap,
- reg_fields[PWM_INT_EN]);
- if (IS_ERR(pc->pwm_int_en))
- return PTR_ERR(pc->pwm_int_en);
+ pc->pwm_out_en = devm_regmap_field_alloc(dev, pc->regmap,
+ reg_fields[PWM_OUT_EN]);
+ if (IS_ERR(pc->pwm_out_en))
+ return PTR_ERR(pc->pwm_out_en);
+
+ pc->pwm_cpt_int_en = devm_regmap_field_alloc(dev, pc->regmap,
+ reg_fields[PWM_CPT_INT_EN]);
+ if (IS_ERR(pc->pwm_cpt_int_en))
+ return PTR_ERR(pc->pwm_cpt_int_en);
return 0;
}
@@ -341,19 +347,19 @@ static int sti_pwm_probe(struct platform_device *pdev)
if (ret)
return ret;
- pc->clk = of_clk_get_by_name(dev->of_node, "pwm");
- if (IS_ERR(pc->clk)) {
+ pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm");
+ if (IS_ERR(pc->pwm_clk)) {
dev_err(dev, "failed to get PWM clock\n");
- return PTR_ERR(pc->clk);
+ return PTR_ERR(pc->pwm_clk);
}
- pc->clk_rate = clk_get_rate(pc->clk);
+ pc->clk_rate = clk_get_rate(pc->pwm_clk);
if (!pc->clk_rate) {
dev_err(dev, "failed to get clock rate\n");
return -EINVAL;
}
- ret = clk_prepare(pc->clk);
+ ret = clk_prepare(pc->pwm_clk);
if (ret) {
dev_err(dev, "failed to prepare clock\n");
return ret;
@@ -367,7 +373,7 @@ static int sti_pwm_probe(struct platform_device *pdev)
ret = pwmchip_add(&pc->chip);
if (ret < 0) {
- clk_unprepare(pc->clk);
+ clk_unprepare(pc->pwm_clk);
return ret;
}
@@ -384,7 +390,7 @@ static int sti_pwm_remove(struct platform_device *pdev)
for (i = 0; i < pc->cdata->num_devs; i++)
pwm_disable(&pc->chip.pwms[i]);
- clk_unprepare(pc->clk);
+ clk_unprepare(pc->pwm_clk);
return pwmchip_remove(&pc->chip);
}
--
2.9.0
Powered by blists - more mailing lists