linux-kernel - [PATCH v4 0/3] MT8173 HDMI 4K support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1471417088-2993-1-git-send-email-bibby.hsieh@mediatek.com>
Date:	Wed, 17 Aug 2016 14:58:05 +0800
From:	Bibby Hsieh <bibby.hsieh@...iatek.com>
To:	David Airlie <airlied@...ux.ie>,
	Matthias Brugger <matthias.bgg@...il.com>,
	Daniel Vetter <daniel.vetter@...ll.ch>,
	<dri-devel@...ts.freedesktop.org>,
	<linux-mediatek@...ts.infradead.org>
CC:	Yingjoe Chen <yingjoe.chen@...iatek.com>,
	Cawa Cheng <cawa.cheng@...iatek.com>,
	Daniel Kurtz <djkurtz@...omium.org>,
	Bibby Hsieh <bibby.hsieh@...iatek.com>,
	Philipp Zabel <p.zabel@...gutronix.de>,
	YT Shen <yt.shen@...iatek.com>,
	Thierry Reding <thierry.reding@...il.com>,
	CK Hu <ck.hu@...iatek.com>, Mao Huang <littlecvr@...omium.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>,
	Sascha Hauer <kernel@...gutronix.de>
Subject: [PATCH v4 0/3] MT8173 HDMI 4K support

This is MT8173 HDMI 4K support PATCH v4, based on 4.8-rc1.

In order to support HDMI 4K on MT8173,
we have to make some modifications.
1) Make sure that mtk_hdmi_send_infoframe is sent successfully.
2) Enhance the HDMI driving current to improve performance.
3) Make sure that pixel clock is 297MHz when resolution is 4K.

Changes since v3:
 - Rebase to 4.8-rc1.
 - The valid range of tvdpll is 1G to 2G Hz, so, we Change the
   if statement of mode->clock to fit that and add a comment.

Changes since v2:
 - Remove the change about preparation for MT2701 support.

Changes since v1:
 - According to the suggestion from philipp, We use the new
   dpi0_sel rate set method.
 - calls clk_set_rate to set the dpi0_sel according to the
   pixel clock.
 - Remove the direct access to all the intermediate clock part.
 - Remove the intermediate tvdpll_d* clocks in dts.
 - According to suggestion from CK, we rename the clock parse
   function and remove it from mtk_dpi_conf struct.
 - Merges the hdmi Pll set rate for pixel clock greater than
   165MHz and smaller parts.

The PATCH depends on the following patch:
https://patchwork.kernel.org/patch/9262575/
(arm64: dts: mt8173: add mmsel clocks for 4K support)

Junzhi Zhao (3):
  drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable
  drm/mediatek: enhance the HDMI driving current
  drm/mediatek: fix the wrong pixel clock when resolution is 4K

 drivers/gpu/drm/mediatek/mtk_dpi.c             |    9 +++--
 drivers/gpu/drm/mediatek/mtk_hdmi.c            |   17 ++++++----
 drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c |   42 +++++++++++++++++-------
 3 files changed, 48 insertions(+), 20 deletions(-)

-- 
1.7.9.5