linux-kernel - Re: [PATCH 1/3] dt/bindings: arm-pl330: add description of arm,pl330-periph-burst

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <55e596a0-4176-4277-40cc-1d26763a8be0@rock-chips.com>
Date:	Wed, 17 Aug 2016 16:11:03 +0800
From:	Shawn Lin <shawn.lin@...k-chips.com>
To:	Lars-Peter Clausen <lars@...afoo.de>,
	Vinod Koul <vinod.koul@...el.com>
Cc:	shawn.lin@...k-chips.com, Rob Herring <robh+dt@...nel.org>,
	Huibin Hong <huibin.hong@...k-chips.com>,
	Xing Zheng <zhengxing@...k-chips.com>,
	devicetree@...r.kernel.org, dianders@...omium.org,
	briannorris@...omium.org, Caesar Wang <wxt@...k-chips.com>,
	dmaengine@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-rockchip@...ts.infradead.org
Subject: Re: [PATCH 1/3] dt/bindings: arm-pl330: add description of
 arm,pl330-periph-burst

Hi, Vinod and Lars-Peter

Ping.. Any better idea to share :)

On 2016/8/9 17:12, Shawn Lin wrote:
> Hi Lars-Peter,
>
> 在 2016/8/9 16:39, Lars-Peter Clausen 写道:
>> On 08/05/2016 09:25 AM, Shawn Lin wrote:
>>> Hi Vinod,
>>>
>>> 在 2016/8/5 11:34, Vinod Koul 写道:
>>>> On Fri, Aug 05, 2016 at 10:53:20AM +0800, Shawn Lin wrote:
>>>>> This patch adds the "arm,pl330-periph-burst" for arm-pl330 to
>>>>> support busrt mode.
>>>>
>>>> why should this be DT property. Only reason I can think of if some hw
>>>> versions support this and some won't.
>>>
>>> yes, if we want to support burst mode, both of the master(pl330) and
>>> client(several peripherals) should implement it, otherwise it will
>>> be broken when enabling.
>>
>> As you said, it is up to the consumer peripheral whether it supports
>> BURST,
>> SINGLE or both. So this is a per client property, but you specify this
>> as a
>> a global property on the producer side.
>
> Thanks for comment.
>
> yup, but what is the proper way to add it ? :)
>
>
> a) If pl330 support BURST as well as all the peripherals, we could
> enable it.
>
> b) If pl300 support BURST, but all the peripherals don't support it,
> we could not enable it.
>
> c) If pl300 support BURST, but not all the peripherals support it,
> we also could not enable it.
>
> the burst feature of peripheral IP may be vendor-specific, but the
> common driver for this peripheral are used for many many vendors which
> means we could not check all of this info. It's very likely to break
> them... I couldn't figure out how many upstreamed peripheral drivers
> who are using pl300 either.
>
> So this check should be done by all this vendors but we could make
> sure we don't break them before they check a), b), c), right?
>
>
>>
>>
>>
>>
>
>


-- 
Best Regards
Shawn Lin