| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1471569215-6046-4-git-send-email-wenyou.yang@atmel.com>
Date: Fri, 19 Aug 2016 09:13:31 +0800
From: Wenyou Yang <wenyou.yang@...el.com>
To: Sebastian Reichel <sre@...nel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Brown <broonie@...nel.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
"Kumar Gala" <galak@...eaurora.org>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Nicolas Ferre <nicolas.ferre@...el.com>,
<linux-pm@...r.kernel.org>, Wenyou Yang <wenyou.yang@...el.com>
Subject: [PATCH v6 3/7] power: act8945a_charger: Add status change update support
Add the charger status change interrupt support, it will report
the power supply changed event.
This interrupt is generated by one of the conditions as below:
- the state machine jumps out of or into the EOC state
- the CHGIN input voltage goes out of or into the valid range.
- the battery temperature goes out of or into the valid range.
- the PRECHARGE time-out occurs.
- the total charge time-out occurs.
Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
---
Changes in v6:
- Add .remove callback function.
- Fix the 'dev' argument of devm_request_irq() to pdev->dev.parent.
Changes in v5: None
Changes in v4:
- Use "interrupts" property, instead of "active-semi,irq-gpios"
for irq.
Changes in v3: None
Changes in v2: None
drivers/power/supply/act8945a_charger.c | 95 ++++++++++++++++++++++++++++++---
1 file changed, 88 insertions(+), 7 deletions(-)
diff --git a/drivers/power/supply/act8945a_charger.c b/drivers/power/supply/act8945a_charger.c
index 6ddfc1d..e5bc237 100644
--- a/drivers/power/supply/act8945a_charger.c
+++ b/drivers/power/supply/act8945a_charger.c
@@ -10,9 +10,11 @@
* published by the Free Software Foundation.
*
*/
+#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/regmap.h>
@@ -75,7 +77,11 @@ static const char *act8945a_charger_manufacturer = "Active-semi";
#define APCH_STATE_CSTATE_PRE 0x03
struct act8945a_charger {
+ struct power_supply *psy;
struct regmap *regmap;
+ struct work_struct work;
+
+ bool init_done;
};
static int act8945a_get_charger_state(struct regmap *regmap, int *val)
@@ -252,6 +258,47 @@ static const struct power_supply_desc act8945a_charger_desc = {
.num_properties = ARRAY_SIZE(act8945a_charger_props),
};
+static int act8945a_enable_interrupt(struct act8945a_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ unsigned char ctrl;
+ int ret;
+
+ ctrl = APCH_CTRL_CHGEOCOUT | APCH_CTRL_CHGEOCIN |
+ APCH_CTRL_INDIS | APCH_CTRL_INCON |
+ APCH_CTRL_TEMPOUT | APCH_CTRL_TEMPIN |
+ APCH_CTRL_TIMRPRE | APCH_CTRL_TIMRTOT;
+ ret = regmap_write(regmap, ACT8945A_APCH_CTRL, ctrl);
+ if (ret)
+ return ret;
+
+ ctrl = APCH_STATUS_CHGSTAT | APCH_STATUS_INSTAT |
+ APCH_STATUS_TEMPSTAT | APCH_STATUS_TIMRSTAT;
+ ret = regmap_write(regmap, ACT8945A_APCH_STATUS, ctrl);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void act8945a_work(struct work_struct *work)
+{
+ struct act8945a_charger *charger =
+ container_of(work, struct act8945a_charger, work);
+
+ power_supply_changed(charger->psy);
+}
+
+static irqreturn_t act8945a_status_changed(int irq, void *dev_id)
+{
+ struct act8945a_charger *charger = dev_id;
+
+ if (charger->init_done)
+ schedule_work(&charger->work);
+
+ return IRQ_HANDLED;
+}
+
#define DEFAULT_TOTAL_TIME_OUT 3
#define DEFAULT_PRE_TIME_OUT 40
#define DEFAULT_INPUT_OVP_THRESHOLD 6600
@@ -360,9 +407,8 @@ static int act8945a_charger_config(struct device *dev,
static int act8945a_charger_probe(struct platform_device *pdev)
{
struct act8945a_charger *charger;
- struct power_supply *psy;
struct power_supply_config psy_cfg = {};
- int ret;
+ int irq, ret;
charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
if (!charger)
@@ -378,17 +424,51 @@ static int act8945a_charger_probe(struct platform_device *pdev)
if (ret)
return ret;
+ irq = of_irq_get(pdev->dev.parent->of_node, 0);
+ if (irq == -EPROBE_DEFER) {
+ dev_err(&pdev->dev, "failed to find IRQ number\n");
+ return -EPROBE_DEFER;
+ }
+
+ ret = devm_request_irq(pdev->dev.parent, irq, act8945a_status_changed,
+ IRQF_TRIGGER_FALLING, "act8945a_interrupt",
+ charger);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request nIRQ pin IRQ\n");
+ return ret;
+ }
+
psy_cfg.of_node = pdev->dev.parent->of_node;
psy_cfg.drv_data = charger;
- psy = devm_power_supply_register(&pdev->dev,
- &act8945a_charger_desc,
- &psy_cfg);
- if (IS_ERR(psy)) {
+ charger->psy = devm_power_supply_register(&pdev->dev,
+ &act8945a_charger_desc,
+ &psy_cfg);
+ if (IS_ERR(charger->psy)) {
dev_err(&pdev->dev, "failed to register power supply\n");
- return PTR_ERR(psy);
+ return PTR_ERR(charger->psy);
}
+ platform_set_drvdata(pdev, charger);
+
+ INIT_WORK(&charger->work, act8945a_work);
+
+ ret = act8945a_enable_interrupt(charger);
+ if (ret)
+ return -EIO;
+
+ charger->init_done = true;
+
+ return 0;
+}
+
+static int act8945a_charger_remove(struct platform_device *pdev)
+{
+ struct act8945a_charger *charger = platform_get_drvdata(pdev);
+
+ charger->init_done = false;
+ cancel_work_sync(&charger->work);
+
return 0;
}
@@ -397,6 +477,7 @@ static struct platform_driver act8945a_charger_driver = {
.name = "act8945a-charger",
},
.probe = act8945a_charger_probe,
+ .remove = act8945a_charger_remove,
};
module_platform_driver(act8945a_charger_driver);
--
2.7.4
Powered by blists - more mailing lists