linux-kernel - [PATCH 1/2] net: phy: Add error checks in the driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1471610891-13353-1-git-send-email-appanad@xilinx.com>
Date:   Fri, 19 Aug 2016 18:18:10 +0530
From:   Kedareswara rao Appana <appana.durga.rao@...inx.com>
To:     <michal.simek@...inx.com>, <soren.brinkmann@...inx.com>,
        <appanad@...inx.com>, <f.fainelli@...il.com>, <andrew@...n.ch>
CC:     <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
Subject: [PATCH 1/2] net: phy: Add error checks in the driver

This patch adds the necessary error checks in the driver.

Reported-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Kedareswara rao Appana <appanad@...inx.com>
---
 drivers/net/phy/xilinx_gmii2rgmii.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c
index e7a20ec..7336fd0 100644
--- a/drivers/net/phy/xilinx_gmii2rgmii.c
+++ b/drivers/net/phy/xilinx_gmii2rgmii.c
@@ -39,11 +39,16 @@ struct gmii2rgmii {
 static int xgmiitorgmii_read_status(struct phy_device *phydev)
 {
 	struct gmii2rgmii *priv = phydev->priv;
-	u16 val = 0;
+	int err, val = 0;
 
-	priv->phy_drv->read_status(phydev);
+	err = priv->phy_drv->read_status(phydev);
+	if (err < 0)
+		return err;
 
 	val = mdiobus_read(phydev->mdio.bus, priv->addr, XILINX_GMII2RGMII_REG);
+	if (val < 0)
+		return val;
+
 	val &= XILINX_GMII2RGMII_SPEED_MASK;
 
 	if (phydev->speed == SPEED_1000)
@@ -53,7 +58,10 @@ static int xgmiitorgmii_read_status(struct phy_device *phydev)
 	else
 		val |= BMCR_SPEED10;
 
-	mdiobus_write(phydev->mdio.bus, priv->addr, XILINX_GMII2RGMII_REG, val);
+	err = mdiobus_write(phydev->mdio.bus, priv->addr, XILINX_GMII2RGMII_REG,
+			    val);
+	if (err < 0)
+		return err;
 
 	return 0;
 }
-- 
2.1.2