linux-kernel - Re: [PATCH v6 5/7] power: act8945a_charger: Add capacity level property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20160819155916.mzrgdgainol4c6nw@earth>
Date:   Fri, 19 Aug 2016 17:59:16 +0200
From:   Sebastian Reichel <sre@...nel.org>
To:     Wenyou Yang <wenyou.yang@...el.com>
Cc:     Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
        David Woodhouse <dwmw2@...radead.org>,
        Rob Herring <robh+dt@...nel.org>,
        Pawel Moll <pawel.moll@....com>,
        Mark Brown <broonie@...nel.org>,
        Ian Campbell <ijc+devicetree@...lion.org.uk>,
        Kumar Gala <galak@...eaurora.org>,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        Nicolas Ferre <nicolas.ferre@...el.com>,
        linux-pm@...r.kernel.org
Subject: Re: [PATCH v6 5/7] power: act8945a_charger: Add capacity level
 property

Hi,

On Fri, Aug 19, 2016 at 09:13:33AM +0800, Wenyou Yang wrote:
> Add the power supply capacity level property, it corresponds to
> POWER_SUPPLY_CAPACITY_LEVEL_*.
> 
> It also utilizes the precision voltage detector function module
> to catch the low battery voltage.
> 
> Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
> ---
> 
> Changes in v6:
>  - For 'lbo-gpios', use gpiod API instead of old gpio API to handle.
> 
> Changes in v5: None
> Changes in v4:
>  - Change devname of devm_request_irq() from "lbo-detect" to
>    "act8945a, lbo-detect".
> 
> Changes in v3: None
> Changes in v2: None
> 
>  drivers/power/supply/act8945a_charger.c | 75 +++++++++++++++++++++++++++++++++
>  1 file changed, 75 insertions(+)
> 
> diff --git a/drivers/power/supply/act8945a_charger.c b/drivers/power/supply/act8945a_charger.c
> index 2ff2f8d..de7ad48 100644
> --- a/drivers/power/supply/act8945a_charger.c
> +++ b/drivers/power/supply/act8945a_charger.c
> @@ -18,6 +18,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/power_supply.h>
>  #include <linux/regmap.h>
> +#include <linux/gpio/consumer.h>
>  
>  static const char *act8945a_charger_model = "ACT8945A";
>  static const char *act8945a_charger_manufacturer = "Active-semi";
> @@ -83,6 +84,7 @@ struct act8945a_charger {
>  	struct work_struct work;
>  
>  	bool init_done;
> +	struct gpio_desc *lbo_gpio;
>  };
>  
>  static int act8945a_get_charger_state(struct regmap *regmap, int *val)
> @@ -208,11 +210,67 @@ static int act8945a_get_battery_health(struct regmap *regmap, int *val)
>  	return 0;
>  }
>  
> +static int act8945a_get_capacity_level(struct act8945a_charger *charger,
> +				       struct regmap *regmap, int *val)
> +{
> +	int ret;
> +	unsigned int status, state, config;
> +	int lbo_level = gpiod_get_value(charger->lbo_gpio);
> +
> +	ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_read(regmap, ACT8945A_APCH_CFG, &config);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
> +	if (ret < 0)
> +		return ret;
> +
> +	state &= APCH_STATE_CSTATE;
> +	state >>= APCH_STATE_CSTATE_SHIFT;
> +
> +	switch (state) {
> +	case APCH_STATE_CSTATE_PRE:
> +		*val = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
> +		break;
> +	case APCH_STATE_CSTATE_FAST:
> +		if (lbo_level)
> +			*val = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
> +		else
> +			*val = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
> +		break;
> +	case APCH_STATE_CSTATE_EOC:
> +		if (status & APCH_STATUS_CHGDAT)
> +			*val = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
> +		else
> +			*val = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
> +		break;
> +	case APCH_STATE_CSTATE_DISABLED:
> +	default:
> +		if (config & APCH_CFG_SUSCHG) {
> +			*val = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
> +		} else {
> +			*val = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
> +			if (!(status & APCH_STATUS_INDAT)) {
> +				if (!lbo_level)
> +					*val = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
> +			}
> +		}
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
>  static enum power_supply_property act8945a_charger_props[] = {
>  	POWER_SUPPLY_PROP_STATUS,
>  	POWER_SUPPLY_PROP_CHARGE_TYPE,
>  	POWER_SUPPLY_PROP_TECHNOLOGY,
>  	POWER_SUPPLY_PROP_HEALTH,
> +	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
>  	POWER_SUPPLY_PROP_MODEL_NAME,
>  	POWER_SUPPLY_PROP_MANUFACTURER
>  };
> @@ -238,6 +296,10 @@ static int act8945a_charger_get_property(struct power_supply *psy,
>  	case POWER_SUPPLY_PROP_HEALTH:
>  		ret = act8945a_get_battery_health(regmap, &val->intval);
>  		break;
> +	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
> +		ret = act8945a_get_capacity_level(charger,
> +						  regmap, &val->intval);
> +		break;
>  	case POWER_SUPPLY_PROP_MODEL_NAME:
>  		val->strval = act8945a_charger_model;
>  		break;
> @@ -352,6 +414,19 @@ static int act8945a_charger_config(struct device *dev,
>  	if (tmp & APCH_CFG_SUSCHG)
>  		value |= APCH_CFG_SUSCHG;
>  
> +	charger->lbo_gpio = devm_gpiod_get(dev, "active-semi,lbo", GPIOD_IN);
> +	if (IS_ERR(charger->lbo_gpio)) {
> +		dev_err(dev, "unable to claim gpio \"lbo\"\n");
> +		charger->lbo_gpio = NULL;
> +	};

You need special handling for -EPROBE_DEFER.

> +	ret = devm_request_irq(dev, gpiod_to_irq(charger->lbo_gpio),
> +			       act8945a_status_changed,
> +			       (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING),
> +			       "act8945a_lbo_detect", charger);
> +	if (ret)
> +		dev_dbg(dev, "failed to request \"lbo\" pin IRQ\n");

Also everything in act8945a_charger_config is done with parent
device as *dev. Thus all devm_*(dev, ...) calls are wrong.

-- Sebastian

Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)