linux-kernel - [PATCH 3.10 034/180] usb: musb: Stop bulk endpoint while queue is rotated

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 21 Aug 2016 17:29:24 +0200
From:   Willy Tarreau <w@....eu>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Andrew Goodbody <andrew.goodbody@...brionix.com>,
        Bin Liu <b-liu@...com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Willy Tarreau <w@....eu>
Subject: [PATCH 3.10 034/180] usb: musb: Stop bulk endpoint while queue is rotated

From: Andrew Goodbody <andrew.goodbody@...brionix.com>

commit 7b2c17f829545df27a910e8d82e133c21c9a8c9c upstream.

Ensure that the endpoint is stopped by clearing REQPKT before
clearing DATAERR_NAKTIMEOUT before rotating the queue on the
dedicated bulk endpoint.
This addresses an issue where a race could result in the endpoint
receiving data before it was reprogrammed resulting in a warning
about such data from musb_rx_reinit before it was thrown away.
The data thrown away was a valid packet that had been correctly
ACKed which meant the host and device got out of sync.

Signed-off-by: Andrew Goodbody <andrew.goodbody@...brionix.com>
Cc: stable@...r.kernel.org
Signed-off-by: Bin Liu <b-liu@...com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Willy Tarreau <w@....eu>
---
 drivers/usb/musb/musb_host.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 9d3044b..cdadbe6 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -948,9 +948,15 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep,
 	if (is_in) {
 		dma = is_dma_capable() ? ep->rx_channel : NULL;
 
-		/* clear nak timeout bit */
+		/*
+		 * Need to stop the transaction by clearing REQPKT first
+		 * then the NAK Timeout bit ref MUSBMHDRC USB 2.0 HIGH-SPEED
+		 * DUAL-ROLE CONTROLLER Programmer's Guide, section 9.2.2
+		 */
 		rx_csr = musb_readw(epio, MUSB_RXCSR);
 		rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+		rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+		musb_writew(epio, MUSB_RXCSR, rx_csr);
 		rx_csr &= ~MUSB_RXCSR_DATAERROR;
 		musb_writew(epio, MUSB_RXCSR, rx_csr);
 
-- 
2.8.0.rc2.1.gbe9624a