linux-kernel - Re: [linux-sunxi] [PATCH 0/9] mfd: axp20x: Add support for AXP809 PMIC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1471762285.581.1.camel@plaes.org>
Date:   Sun, 21 Aug 2016 09:51:25 +0300
From:   Priit Laes <plaes@...es.org>
To:     wens@...e.org, Lee Jones <lee.jones@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Liam Girdwood <lgirdwood@...il.com>,
        Mark Brown <broonie@...nel.org>,
        Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc:     devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: Re: [linux-sunxi] [PATCH 0/9] mfd: axp20x: Add support for AXP809
 PMIC

On Sun, 2016-08-21 at 10:11 +0800, Chen-Yu Tsai wrote:
> Hi everyone,
> 
> This series adds support for X-Powers' AXP806 PMIC. This is the
> secondary
> PMIC accompanying Allwinner's A80 SoC. For now, only the regulators
> are
> supported. While the AXP806 supports standalone operation, no
> hardware
> exists, so this will not be supported.

Title says AXP809, but in text and in subsequent patches there's also
806/809 confusion.

> 
> Patch 1 adds AXP806 to the axp20x bindings.
> 
> Patch 2 adds AXP806 support to the axp20x mfd driver.
> 
> Patch 3 fixes regulator output adjustment during regulator
> registration
> so it doesn't fail if the higher or lower bounds of its voltage
> constraints
> don't match up with the regulator's voltage granularity.
> 
> Patch 4 adds AXP806 support to the axp20x regulator driver.
> 
> Patch 5 adds the unused SW switch output of the AXP809 PMIC on the
> A80
> Optimus board. This was accidentally left out of the AXP809 series.
> 
> Patch 6 adds the unused SW switch output of the AXP809 PMIC on the
> Cubieboard 4. This was accidentally left out of the AXP809 series.
> 
> Patch 7 enables AXP809 support on the A80 Optimus board.
> 
> Patch 8 enables AXP809 support on the Cubieboard 4.
> 
> Patch 9 disables EHCI1 on the A80 Optimus board.
> 
> 
> Regards
> ChenYu
> 
> Chen-Yu Tsai (9):
>   mfd: axp20x: Add bindings for AXP806 PMIC
>   mfd: axp20x: Add support for AXP806 PMIC
>   regulator: core: Try full range when adjusting regulators to
>     constraints
>   regulator: axp20x: support AXP806 variant
>   ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
>   ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
>   ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and
>     regulators
>   ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and
>     regulators
>   ARM: dts: sun9i: a80-optimus: Disable EHCI1
> 
>  Documentation/devicetree/bindings/mfd/axp20x.txt |  28 +++++-
>  arch/arm/boot/dts/sun9i-a80-cubieboard4.dts      | 116
> +++++++++++++++++++++
>  arch/arm/boot/dts/sun9i-a80-optimus.dts          | 123
> ++++++++++++++++++++++-
>  drivers/mfd/axp20x-rsb.c                         |   1 +
>  drivers/mfd/axp20x.c                             |  72 +++++++++++++
>  drivers/regulator/axp20x-regulator.c             | 117
> +++++++++++++++++++--
>  drivers/regulator/core.c                         |   8 +-
>  include/linux/mfd/axp20x.h                       |  60 +++++++++++
>  8 files changed, 508 insertions(+), 17 deletions(-)
> 
> -- 
> 2.9.3
>