| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1471906608-12418-6-git-send-email-john.stultz@linaro.org>
Date: Mon, 22 Aug 2016 15:56:46 -0700
From: John Stultz <john.stultz@...aro.org>
To: lkml <linux-kernel@...r.kernel.org>
Cc: John Stultz <john.stultz@...aro.org>,
Zhangfei Gao <zhangfei.gao@...aro.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Vinod Koul <vinod.koul@...el.com>,
Dan Williams <dan.j.williams@...el.com>,
Mark Brown <broonie@...nel.org>, Andy Green <andy@...mcat.com>
Subject: [RESEND][PATCH 5/7 v4] k3dma: Fix occasional DMA ERR issue by using proper dma api
After lots of debugging on an occasional DMA ERR issue, I realized
that the desc structures which we point the dma hardware are being
allocated out of regular memory. This means when we fill the desc
structures, that data doesn't always get flushed out to memory by
the time we start the dma transfer, resulting in the dma engine getting
some null values, resulting in a DMA ERR on the first irq.
Thus, this patch adopts mechanism similar to the zx296702_dma of
allocating the desc structures from a dma pool, so the memory caching
rules are properly set to avoid this issue.
Cc: Zhangfei Gao <zhangfei.gao@...aro.org>
Cc: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Cc: Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: Vinod Koul <vinod.koul@...el.com>
Cc: Dan Williams <dan.j.williams@...el.com>
Cc: Mark Brown <broonie@...nel.org>
Cc: Andy Green <andy@...mcat.com>
Acked-by: Zhangfei Gao <zhangfei.gao@...aro.org>
Signed-off-by: John Stutlz <john.stultz@...aro.org>
---
drivers/dma/k3dma.c | 53 +++++++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 45 insertions(+), 8 deletions(-)
diff --git a/drivers/dma/k3dma.c b/drivers/dma/k3dma.c
index f46b9b8..9d96c95 100644
--- a/drivers/dma/k3dma.c
+++ b/drivers/dma/k3dma.c
@@ -8,6 +8,8 @@
*/
#include <linux/sched.h>
#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
#include <linux/dmaengine.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -25,6 +27,7 @@
#define DRIVER_NAME "k3-dma"
#define DMA_MAX_SIZE 0x1ffc
+#define LLI_BLOCK_SIZE (4 * PAGE_SIZE)
#define INT_STAT 0x00
#define INT_TC1 0x04
@@ -68,7 +71,7 @@ struct k3_dma_desc_sw {
dma_addr_t desc_hw_lli;
size_t desc_num;
size_t size;
- struct k3_desc_hw desc_hw[0];
+ struct k3_desc_hw *desc_hw;
};
struct k3_dma_phy;
@@ -100,6 +103,7 @@ struct k3_dma_dev {
struct k3_dma_phy *phy;
struct k3_dma_chan *chans;
struct clk *clk;
+ struct dma_pool *pool;
u32 dma_channels;
u32 dma_requests;
unsigned int irq;
@@ -414,6 +418,35 @@ static void k3_dma_fill_desc(struct k3_dma_desc_sw *ds, dma_addr_t dst,
ds->desc_hw[num].config = ccfg;
}
+static struct k3_dma_desc_sw *k3_dma_alloc_desc_resource(int num,
+ struct dma_chan *chan)
+{
+ struct k3_dma_chan *c = to_k3_chan(chan);
+ struct k3_dma_desc_sw *ds;
+ struct k3_dma_dev *d = to_k3_dma(chan->device);
+ int lli_limit = LLI_BLOCK_SIZE / sizeof(struct k3_desc_hw);
+
+ if (num > lli_limit) {
+ dev_dbg(chan->device->dev, "vch %p: sg num %d exceed max %d\n",
+ &c->vc, num, lli_limit);
+ return NULL;
+ }
+
+ ds = kzalloc(sizeof(*ds), GFP_NOWAIT);
+ if (!ds)
+ return NULL;
+
+ ds->desc_hw = dma_pool_alloc(d->pool, GFP_NOWAIT, &ds->desc_hw_lli);
+ if (!ds->desc_hw) {
+ dev_dbg(chan->device->dev, "vch %p: dma alloc fail\n", &c->vc);
+ kfree(ds);
+ return NULL;
+ }
+ memset(ds->desc_hw, 0, sizeof(struct k3_desc_hw) * num);
+ ds->desc_num = num;
+ return ds;
+}
+
static struct dma_async_tx_descriptor *k3_dma_prep_memcpy(
struct dma_chan *chan, dma_addr_t dst, dma_addr_t src,
size_t len, unsigned long flags)
@@ -427,13 +460,12 @@ static struct dma_async_tx_descriptor *k3_dma_prep_memcpy(
return NULL;
num = DIV_ROUND_UP(len, DMA_MAX_SIZE);
- ds = kzalloc(sizeof(*ds) + num * sizeof(ds->desc_hw[0]), GFP_ATOMIC);
+
+ ds = k3_dma_alloc_desc_resource(num, chan);
if (!ds)
return NULL;
- ds->desc_hw_lli = __virt_to_phys((unsigned long)&ds->desc_hw[0]);
ds->size = len;
- ds->desc_num = num;
num = 0;
if (!c->ccfg) {
@@ -482,12 +514,9 @@ static struct dma_async_tx_descriptor *k3_dma_prep_slave_sg(
num += DIV_ROUND_UP(avail, DMA_MAX_SIZE) - 1;
}
- ds = kzalloc(sizeof(*ds) + num * sizeof(ds->desc_hw[0]), GFP_ATOMIC);
+ ds = k3_dma_alloc_desc_resource(num, chan);
if (!ds)
return NULL;
-
- ds->desc_hw_lli = __virt_to_phys((unsigned long)&ds->desc_hw[0]);
- ds->desc_num = num;
num = 0;
for_each_sg(sgl, sg, sglen, i) {
@@ -645,7 +674,9 @@ static void k3_dma_free_desc(struct virt_dma_desc *vd)
{
struct k3_dma_desc_sw *ds =
container_of(vd, struct k3_dma_desc_sw, vd);
+ struct k3_dma_dev *d = to_k3_dma(vd->tx.chan->device);
+ dma_pool_free(d->pool, ds->desc_hw, ds->desc_hw_lli);
kfree(ds);
}
@@ -708,6 +739,12 @@ static int k3_dma_probe(struct platform_device *op)
d->irq = irq;
+ /* A DMA memory pool for LLIs, align on 32-byte boundary */
+ d->pool = dmam_pool_create(DRIVER_NAME, &op->dev,
+ LLI_BLOCK_SIZE, 32, 0);
+ if (!d->pool)
+ return -ENOMEM;
+
/* init phy channel */
d->phy = devm_kzalloc(&op->dev,
d->dma_channels * sizeof(struct k3_dma_phy), GFP_KERNEL);
--
1.9.1
Powered by blists - more mailing lists