| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20160823053746.14521-1-zajec5@gmail.com>
Date: Tue, 23 Aug 2016 07:37:43 +0200
From: Rafał Miłecki <zajec5@...il.com>
To: Florian Fainelli <f.fainelli@...il.com>
Cc: Rafał Miłecki <zajec5@...il.com>,
Rafał Miłecki <rafal@...ecki.pl>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS),
linux-arm-kernel@...ts.infradead.org (moderated list:ARM PORT),
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH V2] ARM: BCM5301X: Add basic dts for BCM53573 based Tenda AC9
BCM53573 seems to be low priced alternative for Northstar chipsts. It
uses single core Cortex-A7 and doesn't have SDU or local (TWD) timer. It
was also stripped out of independent SPI controller and 2 GMACs.
DTS for Tenda AC9 isn't completed yet. It misses e.g. switch entry (we
still need some b53 fixes) and probably some clocks. It adds support for
basic features however and can be improved later.
Signed-off-by: Rafał Miłecki <rafal@...ecki.pl>
---
V2: Use ARCH_BCM_53573 instead of ARCH_BCM_5301X.
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 74 ++++++++++++++++
arch/arm/boot/dts/bcm53573.dtsi | 147 +++++++++++++++++++++++++++++++
3 files changed, 223 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47189-tenda-ac9.dts
create mode 100644 arch/arm/boot/dts/bcm53573.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8e11aae..dd2c49e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -90,6 +90,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm94709.dtb \
bcm953012er.dtb \
bcm953012k.dtb
+dtb-$(CONFIG_ARCH_BCM_53573) += \
+ bcm47189-tenda-ac9.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
new file mode 100644
index 0000000..4403ae8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@...ecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+ compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573";
+ model = "Tenda AC9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "bcm53xx:blue:usb";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wps {
+ label = "bcm53xx:blue:wps";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ system {
+ label = "bcm53xx:blue:system";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
new file mode 100644
index 0000000..efa07de
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@...ecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ };
+
+ mpcore {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x18310000 0x00008000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gic: interrupt-controller@...0 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x0100>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ alp: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ };
+ };
+
+ axi@...00000 {
+ compatible = "brcm,bus-axi";
+ reg = <0x18000000 0x1000>;
+ ranges = <0x00000000 0x18000000 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x000fffff 0xffff>;
+ interrupt-map =
+ /* ChipCommon */
+ <0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* IEEE 802.11 0 */
+ <0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* PCIe Controller 0 */
+ <0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* USB 2.0 Controller */
+ <0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 0 */
+ <0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* IEEE 802.11 1 */
+ <0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 1 */
+ <0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+ chipcommon: chipcommon@0 {
+ compatible = "simple-bus";
+ reg = <0x00000000 0x1000>;
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ uart0: serial@...0 {
+ compatible = "ns16550a";
+ reg = <0x0300 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&alp>;
+ status = "okay";
+ };
+ };
+
+ usb2: usb2@...0 {
+ reg = <0x4000 0x1000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ehci: ehci@...0 {
+ compatible = "generic-ehci";
+ reg = <0x4000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ohci: ohci@...0 {
+ #usb-cells = <0>;
+
+ compatible = "generic-ohci";
+ reg = <0xd000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gmac0: ethernet@...0 {
+ reg = <0x5000 0x1000>;
+ };
+
+ gmac1: ethernet@...0 {
+ reg = <0xb000 0x1000>;
+ };
+ };
+};
--
2.9.3
Powered by blists - more mailing lists