linux-kernel - Re: [PATCH v2 3/8] pinctrl: dt-bindings: Add documentation for Aspeed pin controllers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1471997177.5707.91.camel@aj.id.au>
Date:   Wed, 24 Aug 2016 09:36:17 +0930
From:   Andrew Jeffery <andrew@...id.au>
To:     Rob Herring <robh@...nel.org>
Cc:     Linus Walleij <linus.walleij@...aro.org>,
        Joel Stanley <joel@....id.au>,
        Alexandre Courbot <gnurou@...il.com>,
        Mark Rutland <mark.rutland@....com>,
        Benjamin Herrenschmidt <benh@...nel.crashing.org>,
        Jeremy Kerr <jk@...abs.org>, linux-gpio@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v2 3/8] pinctrl: dt-bindings: Add documentation for
 Aspeed pin controllers

On Tue, 2016-08-23 at 12:23 -0500, Rob Herring wrote:
> On Fri, Aug 19, 2016 at 10:14:09PM +0930, Andrew Jeffery wrote:
> > 
> > Outline expectations on the pin controller's relationship with the
> > System Control Unit (SCU) IP through syscon, and document the compatible
> > strings for 4th and 5th generation Aspeed SoC pin controllers.
> > 
> > Signed-off-by: Andrew Jeffery <andrew@...id.au>
> > ---
> > 
> > Since v1:
> > 
> > * Add SoC-specific compatible strings
> > * Document available function and group property values
> > 
> >  .../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 65 ++++++++++++++++++++++
> >  1 file changed, 65 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> > new file mode 100644
> > index 000000000000..bfd81be4383b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> > @@ -0,0 +1,65 @@
> > +Aspeed Pin Controllers
> > +----------------------
> > +
> > +The Aspeed SoCs vary in functionality inside a generation but have a common mux
> > +device register layout.
> > +
> > +Required properties:
> > +- compatible : Should be any one of the following:
> > +		"aspeed,ast2400-pinctrl"
> > +		"aspeed,g4-pinctrl"
> > +		"aspeed,ast2500-pinctrl"
> > +		"aspeed,g5-pinctrl"
> > +
> > +The pin controller node should be a child of a syscon node with the required
> > +property:
> > +- compatible: "syscon", "simple-mfd"
> > +
> > +Refer to the the bindings described in
> > +Documentation/devicetree/bindings/mfd/syscon.txt
> > +
> > +Subnode Format
> > +--------------
> > +
> > +The required properties of child nodes are (as defined in pinctrl-bindings):
> > +- function
> > +- groups
> > +
> > +Each function has only one associated pin group. Each group is named by its
> > +function. The following values for the function and groups properties are
> > +supported:
> > +
> > +aspeed,ast2400-pinctrl, aspeed,g4-pinctrl:
> > +
> > +ACPI BMCINT DDCCLK DDCDAT FLACK FLBUSY FLWP GPID0 GPIE0 GPIE2 GPIE4 GPIE6 I2C10
> > +I2C11 I2C12 I2C13 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCSMI MDIO1
> > +MDIO2 NCTS1 NCTS3 NCTS4 NDCD1 NDCD3 NDCD4 NDSR1 NDSR3 NDTR1 NDTR3 NRI1 NRI3
> > +NRI4 NRTS1 NRTS3 PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RMII1 ROM16
> > +ROM8 ROMCS1 ROMCS2 ROMCS3 ROMCS4 RXD1 RXD3 RXD4 SD1 SGPMI SIOPBI SIOPBO TIMER3
> > +TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD3 TXD4 UART6 VGAHS VGAVS VPI18 VPI24 VPI30
> > +VPO12 VPO24
> > +
> > +aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
> > +
> > +GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8
> > +I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7
> > +RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8
> > +
> > +Examples:
> > +
> > +syscon: scu@...e2000 {
> > +	compatible = "syscon", "simple-mfd";
> > +	reg = <0x1e6e2000 0x1a8>;
> > +
> > +	pinctrl: pinctrl@...e2000 {
> > +		compatible = "aspeed,g4-pinctrl";
> > +
> This node needs a reg property or the unit address should be dropped. 

Yes, the unit address should be dropped in this case.

> With that:
> 
> Acked-by: Rob Herring <robh@...nel.org>

Thanks,

Andrew
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)