| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1472037450-8907-2-git-send-email-binoy.jayan@linaro.org>
Date: Wed, 24 Aug 2016 16:47:28 +0530
From: Binoy Jayan <binoy.jayan@...aro.org>
To: Arnd Bergmann <arnd@...db.de>, linaro-kernel@...ts.linaro.org
Cc: Daniel Wagner <daniel.wagner@...-carit.de>,
Carsten Emde <C.Emde@...dl.org>, linux-kernel@...r.kernel.org,
"Steven Rostedt (Red Hat)" <rostedt@...dmis.org>
Subject: [PATCH v2 1/3] tracing: Deference pointers without RCU checks
From: Daniel Wagner <daniel.wagner@...-carit.de>
The tracepoint can't be used in code section where we are in the
middle of a state transition.
For example if we place a tracepoint inside start/stop_critical_section(),
lockdep complains with
[ 0.035589] WARNING: CPU: 0 PID: 3 at kernel/locking/lockdep.c:3560 \
check_flags.part.36+0x1bc/0x210() [ 0.036000] \
DEBUG_LOCKS_WARN_ON(current->softirqs_enabled) [ 0.036000] Kernel panic - not \
syncing: panic_on_warn set ... [ 0.036000]
[ 0.036000] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.0.0-rc7+ #460
[ 0.036000] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS \
1.7.5-20140709_153950- 04/01/2014 [ 0.036000] ffffffff81f2463a ffff88007c93bb98 \
ffffffff81afb317 0000000000000001 [ 0.036000] ffffffff81f212b3 ffff88007c93bc18 \
ffffffff81af7bc2 ffff88007c93bbb8 [ 0.036000] ffffffff00000008 ffff88007c93bc28 \
ffff88007c93bbc8 000000000093bbd8 [ 0.036000] Call Trace:
[ 0.036000] [<ffffffff81afb317>] dump_stack+0x4f/0x7b
[ 0.036000] [<ffffffff81af7bc2>] panic+0xc0/0x1e9
[ 0.036000] [<ffffffff81b07188>] ? _raw_spin_unlock_irqrestore+0x38/0x80
[ 0.036000] [<ffffffff81052a60>] warn_slowpath_common+0xc0/0xc0
[ 0.036000] [<ffffffff81057116>] ? __local_bh_enable+0x36/0x70
[ 0.036000] [<ffffffff81052aa6>] warn_slowpath_fmt+0x46/0x50
[ 0.036000] [<ffffffff810a468c>] check_flags.part.36+0x1bc/0x210
[ 0.036000] [<ffffffff810a5168>] lock_is_held+0x78/0x90
[ 0.036000] [<ffffffff81057116>] ? __local_bh_enable+0x36/0x70
[ 0.036000] [<ffffffff810588ab>] ? __do_softirq+0x3db/0x500
[ 0.036000] [<ffffffff81134495>] trace_preempt_on+0x255/0x260
[ 0.036000] [<ffffffff81081c0b>] preempt_count_sub+0xab/0xf0
[ 0.036000] [<ffffffff81057116>] __local_bh_enable+0x36/0x70
[ 0.036000] [<ffffffff810588ab>] __do_softirq+0x3db/0x500
[ 0.036000] [<ffffffff810589ef>] run_ksoftirqd+0x1f/0x60
[ 0.036000] [<ffffffff81079653>] smpboot_thread_fn+0x193/0x2a0
[ 0.036000] [<ffffffff810794c0>] ? SyS_setgroups+0x150/0x150
[ 0.036000] [<ffffffff81075312>] kthread+0xf2/0x110
[ 0.036000] [<ffffffff81b026b3>] ? wait_for_completion+0xc3/0x120
[ 0.036000] [<ffffffff81081c0b>] ? preempt_count_sub+0xab/0xf0
[ 0.036000] [<ffffffff81075220>] ? kthread_create_on_node+0x240/0x240
[ 0.036000] [<ffffffff81b07cc8>] ret_from_fork+0x58/0x90
[ 0.036000] [<ffffffff81075220>] ? kthread_create_on_node+0x240/0x240
[ 0.036000] ---[ end Kernel panic - not syncing: panic_on_warn set ...
PeterZ was so kind to explain it to me what is happening:
"__local_bh_enable() tests if this is the last SOFTIRQ_OFFSET, if so it
tells lockdep softirqs are enabled with trace_softirqs_on() after that
we go an actually modify the preempt_count with preempt_count_sub().
Then in preempt_count_sub() you call into trace_preempt_on() if this
was the last preempt_count increment but you do that _before_ you
actually change the preempt_count with __preempt_count_sub() at this
point lockdep and preempt_count think the world differs and *boom*"
So the simplest way to avoid this is by disabling the consistency
checks.
We also need to take care of the iterating in trace_events_trigger.c
to avoid a splatter in conjunction with the hist trigger.
Signed-off-by: Daniel Wagner <daniel.wagner@...-carit.de>
---
include/linux/rculist.h | 36 ++++++++++++++++++++++++++++++++++++
include/linux/tracepoint.h | 4 ++--
kernel/trace/trace_events_trigger.c | 6 +++---
3 files changed, 41 insertions(+), 5 deletions(-)
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index 8beb98d..bee836b 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -279,6 +279,24 @@ static inline void list_splice_tail_init_rcu(struct list_head *list,
container_of(lockless_dereference(ptr), type, member)
/**
+ * list_entry_rcu_notrace - get the struct for this entry (for tracing)
+ * @ptr: the &struct list_head pointer.
+ * @type: the type of the struct this is embedded in.
+ * @member: the name of the list_head within the struct.
+ *
+ * This primitive may safely run concurrently with the _rcu list-mutation
+ * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().
+ *
+ * This is the same as list_entry_rcu() except that it does
+ * not do any RCU debugging or tracing.
+ */
+#define list_entry_rcu_notrace(ptr, type, member) \
+({ \
+ typeof(*ptr) __rcu *__ptr = (typeof(*ptr) __rcu __force *)ptr; \
+ container_of((typeof(ptr))rcu_dereference_raw_notrace(__ptr), type, member); \
+})
+
+/**
* Where are list_empty_rcu() and list_first_entry_rcu()?
*
* Implementing those functions following their counterparts list_empty() and
@@ -391,6 +409,24 @@ static inline void list_splice_tail_init_rcu(struct list_head *list,
pos = list_entry_lockless(pos->member.next, typeof(*pos), member))
/**
+ * list_for_each_entry_rcu_notrace - iterate over rcu list of given type (for tracing)
+ * @pos: the type * to use as a loop cursor.
+ * @head: the head for your list.
+ * @member: the name of the list_head within the struct.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as list_add_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ *
+ * This is the same as list_for_each_entry_rcu() except that it does
+ * not do any RCU debugging or tracing.
+ */
+#define list_for_each_entry_rcu_notrace(pos, head, member) \
+ for (pos = list_entry_rcu_notrace((head)->next, typeof(*pos), member); \
+ &pos->member != (head); \
+ pos = list_entry_rcu_notrace(pos->member.next, typeof(*pos), member))
+
+/**
* list_for_each_entry_continue_rcu - continue iteration over list of given type
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index be586c6..d0e2a82 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -138,7 +138,7 @@ extern void syscall_unregfunc(void);
return; \
prercu; \
rcu_read_lock_sched_notrace(); \
- it_func_ptr = rcu_dereference_sched((tp)->funcs); \
+ it_func_ptr = rcu_dereference_raw_notrace((tp)->funcs); \
if (it_func_ptr) { \
do { \
it_func = (it_func_ptr)->func; \
@@ -189,7 +189,7 @@ extern void syscall_unregfunc(void);
TP_CONDITION(cond),,); \
if (IS_ENABLED(CONFIG_LOCKDEP) && (cond)) { \
rcu_read_lock_sched_notrace(); \
- rcu_dereference_sched(__tracepoint_##name.funcs);\
+ rcu_dereference_raw_notrace(__tracepoint_##name.funcs);\
rcu_read_unlock_sched_notrace(); \
} \
} \
diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c
index a975571..4489fb4 100644
--- a/kernel/trace/trace_events_trigger.c
+++ b/kernel/trace/trace_events_trigger.c
@@ -71,14 +71,14 @@ event_triggers_call(struct trace_event_file *file, void *rec)
if (list_empty(&file->triggers))
return tt;
- list_for_each_entry_rcu(data, &file->triggers, list) {
+ list_for_each_entry_rcu_notrace(data, &file->triggers, list) {
if (data->paused)
continue;
if (!rec) {
data->ops->func(data, rec);
continue;
}
- filter = rcu_dereference_sched(data->filter);
+ filter = rcu_dereference_raw_notrace(data->filter);
if (filter && !filter_match_preds(filter, rec))
continue;
if (event_command_post_trigger(data->cmd_ops)) {
@@ -111,7 +111,7 @@ event_triggers_post_call(struct trace_event_file *file,
{
struct event_trigger_data *data;
- list_for_each_entry_rcu(data, &file->triggers, list) {
+ list_for_each_entry_rcu_notrace(data, &file->triggers, list) {
if (data->paused)
continue;
if (data->cmd_ops->trigger_type & tt)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists