[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1472005524-3489-2-git-send-email-woogyom.kim@gmail.com>
Date: Wed, 24 Aug 2016 11:25:21 +0900
From: Milo Kim <woogyom.kim@...il.com>
To: Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
David Airlie <airlied@...ux.ie>
Cc: Inki Dae <inki.dae@...sung.com>,
Joonyoung Shim <jy0922.shim@...sung.com>,
Seung-Woo Kim <sw0312.kim@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, Milo Kim <woogyom.kim@...il.com>
Subject: [PATCH v2 1/4] ARM: dts: exynos: Enable HDMI for Arndale Octa board
* Support HDMI display data channel
I2C #2 is assigned for the HDMI DDC. It enables the EDID access.
* GPIO for HDMI hot plug detect
GPX3_7 is used. The HPD awareness is done when the GPIO is active high and
single ended.
* Enable HDMI block in Exynos5420
HDMI PLL consumes 1.0V LDO6 (PVDD_ANAIP_1V0) and HDMI oscillator requires
1.8V LDO7 (PVDD_ANAIP_1V8).
Cc: Kukjin Kim <kgene@...nel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Cc: David Airlie <airlied@...ux.ie>
Cc: Inki Dae <inki.dae@...sung.com>
Cc: Joonyoung Shim <jy0922.shim@...sung.com>
Cc: Seung-Woo Kim <sw0312.kim@...sung.com>
Cc: Kyungmin Park <kyungmin.park@...sung.com>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: devicetree@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-samsung-soc@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Cc: dri-devel@...ts.freedesktop.org
Signed-off-by: Milo Kim <woogyom.kim@...il.com>
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 39a3b81..df362a2 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -70,6 +70,23 @@
status = "disabled";
};
+&i2c_2 {
+ samsung,i2c-slave-addr = <0x50>;
+ status = "okay";
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&hdmi {
+ hpd-gpios = <&gpx3 7 GPIO_OPEN_SOURCE>;
+ vdd_osc-supply = <&ldo7_reg>;
+ vdd_pll-supply = <&ldo6_reg>;
+ status = "okay";
+};
+
&hsi2c_4 {
status = "okay";
--
1.9.1
Powered by blists - more mailing lists