[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20160824212549.16140-4-jglauber@cavium.com>
Date: Wed, 24 Aug 2016 23:25:44 +0200
From: Jan Glauber <jglauber@...ium.com>
To: Wolfram Sang <wsa@...-dreams.de>
Cc: linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
David Daney <ddaney@...iumnetworks.com>,
Jan Glauber <jglauber@...ium.com>
Subject: [PATCH v11 3/8] i2c: thunderx: Add i2c driver for ThunderX SOC
The ThunderX SOC uses the same i2c block as the Octeon SOC.
The main difference is that on ThunderX the device is a PCI device
so device probing is done via PCI, interrupts are MSI-X. The
clock rates can be set via device tree or ACPI.
Signed-off-by: Jan Glauber <jglauber@...ium.com>
---
drivers/i2c/busses/Kconfig | 10 ++
drivers/i2c/busses/Makefile | 2 +
drivers/i2c/busses/i2c-octeon-core.h | 16 ++-
drivers/i2c/busses/i2c-thunderx-pcidrv.c | 209 +++++++++++++++++++++++++++++++
4 files changed, 234 insertions(+), 3 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-thunderx-pcidrv.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 5c3993b..d69a342 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -956,6 +956,16 @@ config I2C_OCTEON
This driver can also be built as a module. If so, the module
will be called i2c-octeon.
+config I2C_THUNDERX
+ tristate "Cavium ThunderX I2C bus support"
+ depends on 64BIT && PCI && (ARM64 || COMPILE_TEST)
+ help
+ Say yes if you want to support the I2C serial bus on Cavium
+ ThunderX SOC.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-thunderx.
+
config I2C_XILINX
tristate "Xilinx I2C Controller"
depends on HAS_IOMEM
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index f975263..29764cc 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -93,6 +93,8 @@ obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_WMT) += i2c-wmt.o
i2c-octeon-objs := i2c-octeon-core.o i2c-octeon-platdrv.o
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
+i2c-thunderx-objs := i2c-octeon-core.o i2c-thunderx-pcidrv.o
+obj-$(CONFIG_I2C_THUNDERX) += i2c-thunderx.o
obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
obj-$(CONFIG_I2C_XLR) += i2c-xlr.o
obj-$(CONFIG_I2C_XLP9XX) += i2c-xlp9xx.o
diff --git a/drivers/i2c/busses/i2c-octeon-core.h b/drivers/i2c/busses/i2c-octeon-core.h
index 81c6a81..33c7e1f 100644
--- a/drivers/i2c/busses/i2c-octeon-core.h
+++ b/drivers/i2c/busses/i2c-octeon-core.h
@@ -8,9 +8,15 @@
#include <linux/pci.h>
/* Register offsets */
-#define SW_TWSI 0x00
-#define TWSI_INT 0x10
-#define SW_TWSI_EXT 0x18
+#if IS_ENABLED(CONFIG_I2C_THUNDERX)
+ #define SW_TWSI 0x1000
+ #define TWSI_INT 0x1010
+ #define SW_TWSI_EXT 0x1018
+#else
+ #define SW_TWSI 0x00
+ #define TWSI_INT 0x10
+ #define SW_TWSI_EXT 0x18
+#endif
/* Controller command patterns */
#define SW_TWSI_V BIT_ULL(63) /* Valid bit */
@@ -94,6 +100,7 @@
struct octeon_i2c {
wait_queue_head_t queue;
struct i2c_adapter adap;
+ struct clk *clk;
int irq;
int hlc_irq; /* For cn7890 only */
u32 twsi_freq;
@@ -109,6 +116,9 @@ struct octeon_i2c {
void (*hlc_int_disable)(struct octeon_i2c *);
atomic_t int_enable_cnt;
atomic_t hlc_int_enable_cnt;
+#if IS_ENABLED(CONFIG_I2C_THUNDERX)
+ struct msix_entry i2c_msix;
+#endif
};
static inline void octeon_i2c_writeq_flush(u64 val, void __iomem *addr)
diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
new file mode 100644
index 0000000..0dcebe2
--- /dev/null
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -0,0 +1,209 @@
+/*
+ * Cavium ThunderX i2c driver.
+ *
+ * Copyright (C) 2015,2016 Cavium Inc.
+ * Authors: Fred Martin <fmartin@...iumnetworks.com>
+ * Jan Glauber <jglauber@...ium.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "i2c-octeon-core.h"
+
+#define DRV_NAME "i2c-thunderx"
+
+#define PCI_DEVICE_ID_THUNDER_TWSI 0xa012
+
+#define SYS_FREQ_DEFAULT 700000000
+
+#define TWSI_INT_ENA_W1C 0x1028
+#define TWSI_INT_ENA_W1S 0x1030
+
+/*
+ * Enable the CORE interrupt.
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void thunder_i2c_int_enable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_writeq_flush(TWSI_INT_CORE_INT,
+ i2c->twsi_base + TWSI_INT_ENA_W1S);
+}
+
+/*
+ * Disable the CORE interrupt.
+ */
+static void thunder_i2c_int_disable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_writeq_flush(TWSI_INT_CORE_INT,
+ i2c->twsi_base + TWSI_INT_ENA_W1C);
+}
+
+static void thunder_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_writeq_flush(TWSI_INT_ST_INT | TWSI_INT_TS_INT,
+ i2c->twsi_base + TWSI_INT_ENA_W1S);
+}
+
+static void thunder_i2c_hlc_int_disable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_writeq_flush(TWSI_INT_ST_INT | TWSI_INT_TS_INT,
+ i2c->twsi_base + TWSI_INT_ENA_W1C);
+}
+
+static u32 thunderx_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm thunderx_i2c_algo = {
+ .master_xfer = octeon_i2c_xfer,
+ .functionality = thunderx_i2c_functionality,
+};
+
+static struct i2c_adapter thunderx_i2c_ops = {
+ .owner = THIS_MODULE,
+ .name = "ThunderX adapter",
+ .algo = &thunderx_i2c_algo,
+};
+
+static void thunder_i2c_clock_enable(struct device *dev, struct octeon_i2c *i2c)
+{
+ int ret;
+
+ i2c->clk = clk_get(dev, NULL);
+ if (IS_ERR(i2c->clk)) {
+ i2c->clk = NULL;
+ goto skip;
+ }
+
+ ret = clk_prepare_enable(i2c->clk);
+ if (ret)
+ goto skip;
+ i2c->sys_freq = clk_get_rate(i2c->clk);
+
+skip:
+ if (!i2c->sys_freq)
+ i2c->sys_freq = SYS_FREQ_DEFAULT;
+}
+
+static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk)
+{
+ if (!clk)
+ return;
+ clk_disable_unprepare(clk);
+ clk_put(clk);
+}
+
+static int thunder_i2c_probe_pci(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct device *dev = &pdev->dev;
+ struct octeon_i2c *i2c;
+ int ret;
+
+ i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
+
+ i2c->dev = dev;
+ pci_set_drvdata(pdev, i2c);
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ ret = pci_request_regions(pdev, DRV_NAME);
+ if (ret)
+ return ret;
+
+ i2c->twsi_base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
+ if (!i2c->twsi_base)
+ return -EINVAL;
+
+ thunder_i2c_clock_enable(dev, i2c);
+ ret = device_property_read_u32(dev, "clock-frequency", &i2c->twsi_freq);
+ if (ret)
+ i2c->twsi_freq = 100000;
+
+ init_waitqueue_head(&i2c->queue);
+
+ i2c->int_enable = thunder_i2c_int_enable;
+ i2c->int_disable = thunder_i2c_int_disable;
+ i2c->hlc_int_enable = thunder_i2c_hlc_int_enable;
+ i2c->hlc_int_disable = thunder_i2c_hlc_int_disable;
+
+ ret = pci_enable_msix(pdev, &i2c->i2c_msix, 1);
+ if (ret)
+ goto error;
+
+ ret = devm_request_irq(dev, i2c->i2c_msix.vector, octeon_i2c_isr, 0,
+ DRV_NAME, i2c);
+ if (ret)
+ goto error;
+
+ ret = octeon_i2c_init_lowlevel(i2c);
+ if (ret)
+ goto error;
+
+ octeon_i2c_set_clock(i2c);
+
+ i2c->adap = thunderx_i2c_ops;
+ i2c->adap.retries = 5;
+ i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info;
+ i2c->adap.dev.parent = dev;
+ i2c->adap.dev.of_node = pdev->dev.of_node;
+ snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+ "Cavium ThunderX i2c adapter at %s", dev_name(dev));
+ i2c_set_adapdata(&i2c->adap, i2c);
+
+ ret = i2c_add_adapter(&i2c->adap);
+ if (ret)
+ goto error;
+
+ dev_info(i2c->dev, "Probed. Set system clock to %u\n", i2c->sys_freq);
+ return 0;
+
+error:
+ thunder_i2c_clock_disable(dev, i2c->clk);
+ return ret;
+}
+
+static void thunder_i2c_remove_pci(struct pci_dev *pdev)
+{
+ struct octeon_i2c *i2c = pci_get_drvdata(pdev);
+
+ thunder_i2c_clock_disable(&pdev->dev, i2c->clk);
+ i2c_del_adapter(&i2c->adap);
+}
+
+static const struct pci_device_id thunder_i2c_pci_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_TWSI) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, thunder_i2c_pci_id_table);
+
+static struct pci_driver thunder_i2c_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = thunder_i2c_pci_id_table,
+ .probe = thunder_i2c_probe_pci,
+ .remove = thunder_i2c_remove_pci,
+};
+
+module_pci_driver(thunder_i2c_pci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Fred Martin <fmartin@...iumnetworks.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter for Cavium ThunderX SOC");
--
2.9.0.rc0.21.g7777322
Powered by blists - more mailing lists