| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGnHSEmVbpaE6pr2JX=bAH0wpz6U7xnT--2BXoWGeKJZT6TwBQ@mail.gmail.com>
Date: Thu, 25 Aug 2016 15:01:06 +0800
From: Tom Yan <tom.ty89@...il.com>
To: Shaun Tancheff <shaun@...cheff.com>
Cc: Hannes Reinecke <hare@...e.de>, linux-ide@...r.kernel.org,
LKML <linux-kernel@...r.kernel.org>, Tejun Heo <tj@...nel.org>,
Christoph Hellwig <hch@....de>,
"Martin K . Petersen" <martin.petersen@...cle.com>,
Damien Le Moal <damien.lemoal@...t.com>,
Josh Bingaman <josh.bingaman@...gate.com>,
Hannes Reinecke <hare@...e.com>,
Shaun Tancheff <shaun.tancheff@...gate.com>
Subject: Re: [PATCH v6 3/4 RESEND] SCT Write Same / DSM Trim
Really please just drop this patch. There is no rational reason for
you to associate the maximum payload size to the logical sector size.
And please stop using the ATA SCSI Response Buffer (ata_scsi_rbuf)
that is used for response to the SCSI layer for SCSI commands that
won't really interact with the ATA device (i.e. triggers an ATA
command), while ata_format_sct_write_same() and
ata_scsi_write_same_xlat() are used for constructing payload that is
going to be send to the ATA device. Can't you even see that these are
of different direction to different layer?
On 25 August 2016 at 02:08, Shaun Tancheff <shaun@...cheff.com> wrote:
> Correct handling of devices with sector_size other that 512 bytes.
>
> In the case of a 4Kn device sector_size it is possible to describe a much
> larger DSM Trim than the current fixed default of 512 bytes.
>
> This patch assumes the minimum descriptor is sector_size and fills out
> the descriptor accordingly.
>
> The ACS-2 specification is quite clear that the DSM command payload is
> sized as number of 512 byte transfers so a 4Kn device will operate
> correctly without this patch.
>
> Signed-off-by: Shaun Tancheff <shaun.tancheff@...gate.com>
> ---
> v5:
> - Reshuffled descripton.
> - Added support for a sector_size descriptor other than 512 bytes.
>
> drivers/ata/libata-scsi.c | 85 +++++++++++++++++++++++++++++++----------------
> 1 file changed, 57 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index ebf1a04..37f456e 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -3283,7 +3283,7 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
> /**
> * ata_format_dsm_trim_descr() - SATL Write Same to DSM Trim
> * @cmd: SCSI command being translated
> - * @num: Maximum number of entries (nominally 64).
> + * @trmax: Maximum number of entries that will fit in sector_size bytes.
> * @sector: Starting sector
> * @count: Total Range of request in logical sectors
> *
> @@ -3298,63 +3298,80 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
> * LBA's should be sorted order and not overlap.
> *
> * NOTE: this is the same format as ADD LBA(S) TO NV CACHE PINNED SET
> + *
> + * Return: Number of bytes copied into sglist.
> */
> -static unsigned int ata_format_dsm_trim_descr(struct scsi_cmnd *cmd, u32 num,
> - u64 sector, u32 count)
> +static size_t ata_format_dsm_trim_descr(struct scsi_cmnd *cmd, u32 trmax,
> + u64 sector, u32 count)
> {
> - __le64 *buffer;
> - u32 i = 0, used_bytes;
> + struct scsi_device *sdp = cmd->device;
> + size_t len = sdp->sector_size;
> + size_t r;
> + __le64 *buf;
> + u32 i = 0;
> unsigned long flags;
>
> - BUILD_BUG_ON(512 > ATA_SCSI_RBUF_SIZE);
> + WARN_ON(len > ATA_SCSI_RBUF_SIZE);
> +
> + if (len > ATA_SCSI_RBUF_SIZE)
> + len = ATA_SCSI_RBUF_SIZE;
>
> spin_lock_irqsave(&ata_scsi_rbuf_lock, flags);
> - buffer = ((void *)ata_scsi_rbuf);
> - while (i < num) {
> + buf = ((void *)ata_scsi_rbuf);
> + memset(buf, 0, len);
> + while (i < trmax) {
> u64 entry = sector |
> ((u64)(count > 0xffff ? 0xffff : count) << 48);
> - buffer[i++] = __cpu_to_le64(entry);
> + buf[i++] = __cpu_to_le64(entry);
> if (count <= 0xffff)
> break;
> count -= 0xffff;
> sector += 0xffff;
> }
> -
> - used_bytes = ALIGN(i * 8, 512);
> - memset(buffer + i, 0, used_bytes - i * 8);
> - sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buffer, 512);
> + r = sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, len);
> spin_unlock_irqrestore(&ata_scsi_rbuf_lock, flags);
>
> - return used_bytes;
> + return r;
> }
>
> /**
> * ata_format_dsm_trim_descr() - SATL Write Same to ATA SCT Write Same
> * @cmd: SCSI command being translated
> * @lba: Starting sector
> - * @num: Number of logical sectors to be zero'd.
> + * @num: Number of sectors to be zero'd.
> *
> - * Rewrite the WRITE SAME descriptor to be an SCT Write Same formatted
> + * Rewrite the WRITE SAME payload to be an SCT Write Same formatted
> * descriptor.
> * NOTE: Writes a pattern (0's) in the foreground.
> - * Large write-same requents can timeout.
> + *
> + * Return: Number of bytes copied into sglist.
> */
> -static void ata_format_sct_write_same(struct scsi_cmnd *cmd, u64 lba, u64 num)
> +static size_t ata_format_sct_write_same(struct scsi_cmnd *cmd, u64 lba, u64 num)
> {
> - u16 *sctpg;
> + struct scsi_device *sdp = cmd->device;
> + size_t len = sdp->sector_size;
> + size_t r;
> + u16 *buf;
> unsigned long flags;
>
> spin_lock_irqsave(&ata_scsi_rbuf_lock, flags);
> - sctpg = ((void *)ata_scsi_rbuf);
> + buf = ((void *)ata_scsi_rbuf);
> +
> + put_unaligned_le16(0x0002, &buf[0]); /* SCT_ACT_WRITE_SAME */
> + put_unaligned_le16(0x0101, &buf[1]); /* WRITE PTRN FG */
> + put_unaligned_le64(lba, &buf[2]);
> + put_unaligned_le64(num, &buf[6]);
> + put_unaligned_le32(0u, &buf[10]); /* pattern */
> +
> + WARN_ON(len > ATA_SCSI_RBUF_SIZE);
>
> - put_unaligned_le16(0x0002, &sctpg[0]); /* SCT_ACT_WRITE_SAME */
> - put_unaligned_le16(0x0101, &sctpg[1]); /* WRITE PTRN FG */
> - put_unaligned_le64(lba, &sctpg[2]);
> - put_unaligned_le64(num, &sctpg[6]);
> - put_unaligned_le32(0u, &sctpg[10]);
> + if (len > ATA_SCSI_RBUF_SIZE)
> + len = ATA_SCSI_RBUF_SIZE;
>
> - sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), sctpg, 512);
> + r = sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, len);
> spin_unlock_irqrestore(&ata_scsi_rbuf_lock, flags);
> +
> + return r;
> }
>
> /**
> @@ -3371,11 +3388,13 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
> {
> struct ata_taskfile *tf = &qc->tf;
> struct scsi_cmnd *scmd = qc->scsicmd;
> + struct scsi_device *sdp = scmd->device;
> + size_t len = sdp->sector_size;
> struct ata_device *dev = qc->dev;
> const u8 *cdb = scmd->cmnd;
> u64 block;
> u32 n_block;
> - const u32 trmax = ATA_MAX_TRIM_RNUM;
> + const u32 trmax = len >> 3;
> u32 size;
> u16 fp;
> u8 bp = 0xff;
> @@ -3420,8 +3439,16 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
> if (!scsi_sg_count(scmd))
> goto invalid_param_len;
>
> + /*
> + * size must match sector size in bytes
> + * For DATA SET MANAGEMENT TRIM in ACS-2 nsect (aka count)
> + * is defined as number of 512 byte blocks to be transferred.
> + */
> if (unmap) {
> size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
> + if (size != len)
> + goto invalid_param_len;
> +
> if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
> /* Newer devices support queued TRIM commands */
> tf->protocol = ATA_PROT_NCQ;
> @@ -3441,7 +3468,9 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
> tf->command = ATA_CMD_DSM;
> }
> } else {
> - ata_format_sct_write_same(scmd, block, n_block);
> + size = ata_format_sct_write_same(scmd, block, n_block);
> + if (size != len)
> + goto invalid_param_len;
>
> tf->hob_feature = 0;
> tf->feature = 0;
> --
> 2.9.3
>
Powered by blists - more mailing lists