| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1472109599-21915-8-git-send-email-wenyou.yang@atmel.com>
Date: Thu, 25 Aug 2016 15:19:55 +0800
From: Wenyou Yang <wenyou.yang@...el.com>
To: Sebastian Reichel <sre@...nel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Brown <broonie@...nel.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
"Kumar Gala" <galak@...eaurora.org>,
Lee Jones <lee.jones@...aro.org>,
Nicolas Ferre <nicolas.ferre@...el.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-pm@...r.kernel.org>,
"Wenyou Yang" <wenyou.yang@...el.com>
Subject: [PATCH v8 07/11] power: act8945a_charger: Add capacity level property
Add the power supply capacity level property, it corresponds to
POWER_SUPPLY_CAPACITY_LEVEL_*.
It also utilizes the precision voltage detector function module
to catch the low battery voltage.
Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
---
Changes in v8:
- As the act8945a_charger is regarded as a sub-device, all
properties can be achieved from its own device node,
use devm_gpiod_get() properly as well to get "lbo-gpios".
- Add missing return -EPROBE_DEFER for "lbo-gpios".
Changes in v7:
- For "lbo-gpios", use gpiod_get() to fix devm_gpiod_get() wrong use
with parent device as *dev argument.
- Add the handle -EPROBE_DEFER returned from gpiod_get "lbo-gpios".
- Use dev_info() to print log if the lbo irq request failed.
- Remove unneeded semicolon.
- Add depends on GPIOLIB for use gpiod.
Changes in v6:
- For "lbo-gpios", use gpiod API instead of old gpio API to handle.
Changes in v5: None
Changes in v4:
- Change devname of devm_request_irq() from "lbo-detect" to
"act8945a, lbo-detect".
Changes in v3: None
Changes in v2: None
drivers/power/supply/Kconfig | 2 +-
drivers/power/supply/act8945a_charger.c | 78 +++++++++++++++++++++++++++++++++
2 files changed, 79 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 76806a0..a983de2 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -77,7 +77,7 @@ config BATTERY_88PM860X
config BATTERY_ACT8945A
tristate "Active-semi ACT8945A charger driver"
- depends on MFD_ACT8945A || COMPILE_TEST
+ depends on MFD_ACT8945A || GPIOLIB || COMPILE_TEST
help
Say Y here to enable support for power supply provided by
Active-semi ActivePath ACT8945A charger.
diff --git a/drivers/power/supply/act8945a_charger.c b/drivers/power/supply/act8945a_charger.c
index 48775f8..b66b023 100644
--- a/drivers/power/supply/act8945a_charger.c
+++ b/drivers/power/supply/act8945a_charger.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
static const char *act8945a_charger_model = "ACT8945A";
static const char *act8945a_charger_manufacturer = "Active-semi";
@@ -83,6 +84,7 @@ struct act8945a_charger {
struct work_struct work;
bool init_done;
+ struct gpio_desc *lbo_gpio;
};
static int act8945a_get_charger_state(struct regmap *regmap, int *val)
@@ -208,11 +210,67 @@ static int act8945a_get_battery_health(struct regmap *regmap, int *val)
return 0;
}
+static int act8945a_get_capacity_level(struct act8945a_charger *charger,
+ struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int status, state, config;
+ int lbo_level = gpiod_get_value(charger->lbo_gpio);
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_CFG, &config);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ state &= APCH_STATE_CSTATE;
+ state >>= APCH_STATE_CSTATE_SHIFT;
+
+ switch (state) {
+ case APCH_STATE_CSTATE_PRE:
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ break;
+ case APCH_STATE_CSTATE_FAST:
+ if (lbo_level)
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
+ else
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ break;
+ case APCH_STATE_CSTATE_EOC:
+ if (status & APCH_STATUS_CHGDAT)
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ else
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ break;
+ case APCH_STATE_CSTATE_DISABLED:
+ default:
+ if (config & APCH_CFG_SUSCHG) {
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+ } else {
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ if (!(status & APCH_STATUS_INDAT)) {
+ if (!lbo_level)
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ }
+ }
+ break;
+ }
+
+ return 0;
+}
+
static enum power_supply_property act8945a_charger_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER
};
@@ -238,6 +296,10 @@ static int act8945a_charger_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_HEALTH:
ret = act8945a_get_battery_health(regmap, &val->intval);
break;
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ ret = act8945a_get_capacity_level(charger,
+ regmap, &val->intval);
+ break;
case POWER_SUPPLY_PROP_MODEL_NAME:
val->strval = act8945a_charger_model;
break;
@@ -354,6 +416,22 @@ static int act8945a_charger_config(struct device *dev,
dev_info(dev, "have been suspended\n");
}
+ charger->lbo_gpio = devm_gpiod_get(dev, "active-semi,lbo", GPIOD_IN);
+ if (PTR_ERR(charger->lbo_gpio) == -EPROBE_DEFER) {
+ dev_info(dev, "probe retry requested for gpio \"lbo\"\n");
+ return -EPROBE_DEFER;
+ } else if (IS_ERR(charger->lbo_gpio)) {
+ dev_err(dev, "unable to claim gpio \"lbo\"\n");
+ charger->lbo_gpio = NULL;
+ }
+
+ ret = devm_request_irq(dev, gpiod_to_irq(charger->lbo_gpio),
+ act8945a_status_changed,
+ (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING),
+ "act8945a_lbo_detect", charger);
+ if (ret)
+ dev_info(dev, "failed to request gpio \"lbo\" IRQ\n");
+
chglev_pin = of_get_named_gpio_flags(np,
"active-semi,chglev-gpios", 0, &flags);
--
2.7.4
Powered by blists - more mailing lists