linux-kernel - [PATCH v2 0/8] mfd: axp20x: Add support for AXP806 PMIC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20160827075544.26316-1-wens@csie.org>
Date:   Sat, 27 Aug 2016 15:55:36 +0800
From:   Chen-Yu Tsai <wens@...e.org>
To:     Lee Jones <lee.jones@...aro.org>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Liam Girdwood <lgirdwood@...il.com>,
        Mark Brown <broonie@...nel.org>,
        Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc:     Chen-Yu Tsai <wens@...e.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-sunxi@...glegroups.com
Subject: [PATCH v2 0/8] mfd: axp20x: Add support for AXP806 PMIC

Hi everyone,

This is v2 of the AXP806 PMIC support series. The patch "regulator: core:
Try full range when adjusting regulators to constraints" has been dropped.
Other changes are inline in the patches.

This series adds support for X-Powers' AXP806 PMIC. This is the secondary
PMIC accompanying Allwinner's A80 SoC. For now, only the regulators are
supported. While the AXP806 supports standalone operation, no hardware
exists, so this will not be supported.

Patch 1 adds AXP806 to the axp20x bindings.

Patch 2 adds AXP806 support to the axp20x mfd driver.

Patch 3 adds AXP806 support to the axp20x regulator driver.

Patch 4 adds the unused SW switch output of the AXP809 PMIC on the A80
Optimus board. This was accidentally left out of the AXP809 series.

Patch 5 adds the unused SW switch output of the AXP809 PMIC on the
Cubieboard 4. This was accidentally left out of the AXP809 series.

Patch 6 enables AXP809 support on the A80 Optimus board.

Patch 7 enables AXP809 support on the Cubieboard 4.

Patch 8 disables EHCI1 on the A80 Optimus board.

Regards
ChenYu

Chen-Yu Tsai (8):
  mfd: axp20x: Add bindings for AXP806 PMIC
  mfd: axp20x: Add support for AXP806 PMIC
  regulator: axp20x: support AXP806 variant
  ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and
    regulators
  ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and
    regulators
  ARM: dts: sun9i: a80-optimus: Disable EHCI1

 Documentation/devicetree/bindings/mfd/axp20x.txt |  28 +++++-
 arch/arm/boot/dts/sun9i-a80-cubieboard4.dts      | 116 +++++++++++++++++++++
 arch/arm/boot/dts/sun9i-a80-optimus.dts          | 123 ++++++++++++++++++++++-
 drivers/mfd/axp20x-rsb.c                         |   1 +
 drivers/mfd/axp20x.c                             |  72 +++++++++++++
 drivers/regulator/axp20x-regulator.c             | 118 ++++++++++++++++++++--
 include/linux/mfd/axp20x.h                       |  60 +++++++++++
 7 files changed, 507 insertions(+), 11 deletions(-)

-- 
2.9.3