Date:   Mon, 29 Aug 2016 18:07:46 +0000
From:   vadimp@...lanox.com
To:     rpurdie@...ys.net, j.anaszewski@...sung.com
Cc:     linux-leds@...r.kernel.org, linux-kernel@...r.kernel.org,
        jiri@...nulli.us, michaelsh@...lanox.com,
        Vadim Pasternak <vadimp@...lanox.com>
Subject: [patch] leds: add driver for Mellanox systems LEDs

From: Vadim Pasternak <vadimp@...lanox.com>

This makes it possible to create a set of LEDs for Mellanox systems:
"msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410",
"msb7800", "msn2740", "msn2100".

Drivers creates led devices according to  system configuration, provided
through system DMA data, like
fan1:green fan1:red status:green status:red

LED setting is controlled through on board CPLD Lattice device.
For setting particular led off, solid,
blink (blink required ledtrig-timer module):
echo 0 > /sys/class/leds/status\:green/brightness
echo 1 > /sys/class/leds/status\:green/brightness
echo timer > /sys/class/leds/status\:green/trigger

On module probing all leds are set green, on removing - off.

Last setting overwrites previous, f.e. sequence for
changing led from green - red - green:
echo 1 > /sys/class/leds/psu\:green/brightness
echo 1 > /sys/class/leds/psu\:red/brightness
echo 1 > /sys/class/leds/psu\:green/brightness

The Kconfig currently controlling compilation of this code is:
drivers/leds/Kconfig:config LEDS_MLXCPLD

Signed-off-by: Vadim Pasternak <vadimp@...lanox.com>
Reviewed-by: Jiri Pirko <jiri@...lanox.com>
---
 MAINTAINERS                 |   7 +
 drivers/leds/Kconfig        |   8 +
 drivers/leds/Makefile       |   1 +
 drivers/leds/leds-mlxcpld.c | 385 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 401 insertions(+)
 create mode 100644 drivers/leds/leds-mlxcpld.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 0bbe4b1..31cffdd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7655,6 +7655,13 @@ W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 F:	drivers/net/ethernet/mellanox/mlxsw/
 
+MELLANOX MLXCPLD LED DRIVER
+M:	Vadim Pasternak <vadimp@...lanox.com>
+L:	linux-kernel@...r.kernel.org
+S:	Supported
+W:	http://www.mellanox.com
+F:	drivers/leds/leds-mlxcpld.c
+
 SOFT-ROCE DRIVER (rxe)
 M:	Moni Shoua <monis@...lanox.com>
 L:	linux-rdma@...r.kernel.org
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9dcc9b1..4cd85be 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -631,6 +631,14 @@ config LEDS_VERSATILE
 	  This option enabled support for the LEDs on the ARM Versatile
 	  and RealView boards. Say Y to enabled these.
 
+config LEDS_MLXCPLD
+	tristate "LED support for the Mellanox boards"
+	depends on X86_64 && DMI
+	depends on LEDS_CLASS
+	help
+	  This option enabled support for the LEDs on the Mellanox
+	  boards. Say Y to enabled these.
+
 comment "LED Triggers"
 source "drivers/leds/trigger/Kconfig"
 
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 0684c86..9a2494b 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
 obj-$(CONFIG_LEDS_POWERNV)		+= leds-powernv.o
 obj-$(CONFIG_LEDS_SEAD3)		+= leds-sead3.o
 obj-$(CONFIG_LEDS_IS31FL32XX)		+= leds-is31fl32xx.o
+obj-$(CONFIG_LEDS_MLXCPLD)		+= leds-mlxcpld.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/drivers/leds/leds-mlxcpld.c b/drivers/leds/leds-mlxcpld.c
new file mode 100644
index 0000000..b79342c
--- /dev/null
+++ b/drivers/leds/leds-mlxcpld.c
@@ -0,0 +1,385 @@
+/*
+ * drivers/leds/leds-mlxcpld.c
+ * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2016 Vadim Pasternak <vadimp@...lanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/version.h>
+#include <linux/acpi.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/dmi.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/leds.h>
+
+#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR     0x2500 /* LPC bus access */
+
+/* Color codes for leds */
+#define LED_IS_OFF            0x00
+#define LED_RED_STATIC_ON     0x05
+#define LED_RED_BLINK_HALF    0x06
+#define LED_GREEN_STATIC_ON   0x0D
+#define LED_GREEN_BLINK_HALF  0x0E
+
+/**
+ * mlxcpld_param -
+ * @offset - offset for led access in CPLD device
+ * @mask - mask for led access in CPLD device
+ * @base_color - base color code for led
+**/
+struct mlxcpld_param {
+	u8 offset;
+	u8 mask;
+	u8 base_color;
+};
+
+/**
+ * mlxcpld_led_priv -
+ * @led - led class device pointer
+ * @param - led CPLD access parameters
+**/
+struct mlxcpld_led_priv {
+	struct led_classdev cdev;
+	struct mlxcpld_param param;
+};
+#define cdev_to_priv(c)		container_of(c, struct mlxcpld_led_priv, cdev)
+
+/**
+ * mlxcpld_led_profile (defined per system class) -
+ * @offset - offset for led access in CPLD device
+ * @mask - mask for led access in CPLD device
+ * @base_color - base color code
+ * @brightness - default brightness setting (on/off)
+ * @name - led name
+**/
+struct mlxcpld_led_profile {
+	u8 offset;
+	u8 mask;
+	u8 base_color;
+	enum led_brightness brightness;
+	const char *name;
+};
+
+/**
+ * mlxcpld_led_pdata -
+ * @pdev - platform device pointer
+ * @led - led class device pointer
+ * @trigger - trigger class device pointer
+ * @profile - system configuration profile
+ * @num_led_instances - number of system triggers
+ * @lock - device access lock
+**/
+struct mlxcpld_led_pdata {
+	struct platform_device *pdev;
+	struct mlxcpld_led_priv *pled;
+	struct mlxcpld_led_profile *profile;
+	int num_led_instances;
+	spinlock_t lock;
+};
+static struct mlxcpld_led_pdata *mlxcpld_led;
+
+/* Default profile fit the next Mellanox systems:
+ * "msx6710", "msx6720", "msb7700", "msn2700", "msx1410",
+ * "msn2410", "msb7800", "msn2740"
+ */
+struct mlxcpld_led_profile mlxcpld_led_default_profile[] = {
+	{
+		0x21, 0xf0, LED_GREEN_STATIC_ON, LED_FULL, "fan1:green",
+	},
+	{
+		0x21, 0xf0, LED_RED_STATIC_ON, LED_OFF, "fan1:red",
+	},
+	{
+		0x21, 0x0f, LED_GREEN_STATIC_ON, LED_FULL, "fan2:green",
+	},
+	{
+		0x21, 0x0f, LED_RED_STATIC_ON, LED_OFF, "fan2:red",
+	},
+	{
+		0x22, 0xf0, LED_GREEN_STATIC_ON, LED_FULL, "fan3:green",
+	},
+	{
+		0x22, 0xf0, LED_RED_STATIC_ON, LED_OFF, "fan3:red",
+	},
+	{
+		0x22, 0x0f, LED_GREEN_STATIC_ON, LED_FULL, "fan4:green",
+	},
+	{
+		0x22, 0x0f, LED_RED_STATIC_ON, LED_OFF, "fan4:red",
+	},
+	{
+		0x20, 0x0f, LED_GREEN_STATIC_ON, LED_FULL, "psu:green",
+	},
+	{
+		0x20, 0x0f, LED_RED_STATIC_ON, LED_OFF, "psu:red",
+	},
+	{
+		0x20, 0xf0, LED_GREEN_STATIC_ON, LED_FULL, "status:green",
+	},
+	{
+		0x20, 0xf0, LED_RED_STATIC_ON, LED_OFF, "status:red",
+	},
+};
+
+/* Profile fit the Mellanox systems based on "msn2100" */
+struct mlxcpld_led_profile mlxcpld_led_msn2100_profile[] = {
+	{
+		0x21, 0xf0, LED_GREEN_STATIC_ON, LED_FULL, "fan:green",
+	},
+	{
+		0x21, 0xf0, LED_RED_STATIC_ON, LED_OFF, "fan:red",
+	},
+	{
+		0x23, 0xf0, LED_GREEN_STATIC_ON, LED_FULL, "psu1:green",
+	},
+	{
+		0x23, 0xf0, LED_RED_STATIC_ON, LED_OFF, "psu1:red",
+	},
+	{
+		0x23, 0x0f, LED_GREEN_STATIC_ON, LED_FULL, "psu2:green",
+	},
+	{
+		0x23, 0x0f, LED_RED_STATIC_ON, LED_OFF, "psu2:red",
+	},
+	{
+		0x20, 0xf0, LED_GREEN_STATIC_ON, LED_FULL, "status:green",
+	},
+	{
+		0x20, 0xf0, LED_RED_STATIC_ON, LED_OFF, "status:red",
+	},
+	{
+		0x24, 0xf0, LED_GREEN_STATIC_ON, LED_OFF,  "uid:blue",
+	},
+};
+
+enum mlxcpld_led_platform_types {
+	mlxcpld_led_platform_default,
+	mlxcpld_led_platform_msn2100,
+};
+
+const char *mlx_product_names[] = {
+	"DEFAULT",
+	"MSN2100",
+};
+
+static enum
+mlxcpld_led_platform_types mlxcpld_led_platform_check_sys_type(void)
+{
+	const char *mlx_product_name;
+	int i;
+
+	mlx_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+	if (mlx_product_name == NULL)
+		return mlxcpld_led_platform_default;
+
+	for (i = 1;  i < ARRAY_SIZE(mlx_product_names); i++) {
+		if (strstr(mlx_product_name, mlx_product_names[i]))
+			return i;
+	}
+
+	return mlxcpld_led_platform_default;
+}
+
+static void mlxcpld_led_bus_access_func(u16 base, u8 offset, u8 rw_flag,
+					u8 *data)
+{
+	u32 addr = base + offset;
+
+	if (rw_flag == 0)
+		outb(*data, addr);
+	else
+		*data = inb(addr);
+}
+
+static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset)
+{
+	u8 tmask, val;
+
+	spin_lock(&mlxcpld_led->lock);
+	tmask = (mask == 0xf0) ? vset : (vset << 4);
+	mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 1,
+				    &val);
+	val = (val & mask) | tmask;
+	mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 0,
+				    &val);
+	spin_unlock(&mlxcpld_led->lock);
+}
+
+static void mlxcpld_led_brightness(struct led_classdev *led,
+				   enum led_brightness value)
+{
+	struct mlxcpld_led_priv *pled = cdev_to_priv(led);
+
+	switch (value) {
+	case LED_FULL:
+	case LED_HALF:
+	default:
+		mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
+				     pled->param.base_color);
+		break;
+	case LED_OFF:
+		mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
+				     LED_IS_OFF);
+		break;
+	}
+}
+
+static int mlxcpld_led_blink(struct led_classdev *led,
+			     unsigned long *delay_on,
+			     unsigned long *delay_off)
+{
+	struct mlxcpld_led_priv *pled = cdev_to_priv(led);
+
+	/* SW blinking is not supported.
+	 * HW supports two types of blinking: full (6KHz) and half (3KHz).
+	 * Defaul value is 3KHz, which is set for blink request.
+	 */
+	mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
+			     pled->param.base_color + 1);
+
+	return 0;
+}
+
+static int mlxcpld_led_config(struct device *dev,
+			      struct mlxcpld_led_pdata *cpld)
+{
+	int err = 0, i;
+
+	cpld->pled = devm_kzalloc(dev, sizeof(struct mlxcpld_led_priv) *
+				  cpld->num_led_instances, GFP_KERNEL);
+	if (!cpld->pled)
+		return -ENOMEM;
+
+	for (i = 0; i < cpld->num_led_instances; i++) {
+		cpld->pled[i].cdev.name = cpld->profile[i].name;
+		cpld->pled[i].cdev.brightness = cpld->profile[i].brightness;
+		cpld->pled[i].cdev.max_brightness = 1;
+		cpld->pled[i].cdev.brightness_set = mlxcpld_led_brightness;
+		cpld->pled[i].cdev.blink_set = mlxcpld_led_blink;
+		cpld->pled[i].cdev.flags = LED_CORE_SUSPENDRESUME;
+		err = devm_led_classdev_register(dev, &cpld->pled[i].cdev);
+		if (err) {
+			devm_kfree(dev, cpld->pled);
+			return err;
+		}
+
+		cpld->pled[i].param.offset = mlxcpld_led->profile[i].offset;
+		cpld->pled[i].param.mask = mlxcpld_led->profile[i].mask;
+		cpld->pled[i].param.base_color =
+					mlxcpld_led->profile[i].base_color;
+		switch (mlxcpld_led->profile[i].brightness) {
+		case LED_HALF:
+		case LED_FULL:
+			mlxcpld_led_brightness(&cpld->pled[i].cdev,
+					mlxcpld_led->profile[i].brightness);
+			break;
+		default:
+			break;
+		}
+	}
+
+	return err;
+}
+
+static int __init mlxcpld_led_probe(struct platform_device *pdev)
+{
+	enum mlxcpld_led_platform_types mlxcpld_led_plat =
+					mlxcpld_led_platform_check_sys_type();
+
+	mlxcpld_led = devm_kzalloc(&pdev->dev, sizeof(*mlxcpld_led),
+				   GFP_KERNEL);
+	if (!mlxcpld_led)
+		return -ENOMEM;
+	mlxcpld_led->pdev = pdev;
+
+	switch (mlxcpld_led_plat) {
+	case mlxcpld_led_platform_msn2100:
+		mlxcpld_led->profile = mlxcpld_led_msn2100_profile;
+		mlxcpld_led->num_led_instances =
+				ARRAY_SIZE(mlxcpld_led_msn2100_profile);
+		break;
+
+	default:
+		mlxcpld_led->profile = mlxcpld_led_default_profile;
+		mlxcpld_led->num_led_instances =
+				ARRAY_SIZE(mlxcpld_led_default_profile);
+		break;
+	}
+
+	spin_lock_init(&mlxcpld_led->lock);
+	platform_set_drvdata(pdev, mlxcpld_led);
+
+	return mlxcpld_led_config(&pdev->dev, mlxcpld_led);
+}
+
+static struct platform_driver mlxcpld_led_driver = {
+	.driver = {
+		.name	= KBUILD_MODNAME,
+	},
+};
+
+static int __init mlxcpld_led_init(void)
+{
+	struct platform_device *pdev;
+	int err;
+
+	pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
+	if (!pdev) {
+		pr_err("Device allocation failed\n");
+		return -ENOMEM;
+	}
+
+	err = platform_driver_probe(&mlxcpld_led_driver, mlxcpld_led_probe);
+	if (err) {
+		pr_err("Probe platform driver failed\n");
+		platform_device_unregister(pdev);
+	}
+
+	return err;
+}
+
+static void __exit mlxcpld_led_exit(void)
+{
+	platform_device_unregister(mlxcpld_led->pdev);
+	platform_driver_unregister(&mlxcpld_led_driver);
+}
+
+module_init(mlxcpld_led_init);
+module_exit(mlxcpld_led_exit);
+
+MODULE_AUTHOR("Vadim Pasternak (vadimp@...lanox.com)");
+MODULE_DESCRIPTION("Mellanox board LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:leds-mlxcpld");
-- 
2.1.4

Powered by blists - more mailing lists