linux-kernel - [PATCH v10 1/4] i2c: tegra: use readl_poll_timeout after config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1472584279-19924-1-git-send-email-smohammed@nvidia.com>
Date:   Wed, 31 Aug 2016 00:41:16 +0530
From:   Shardar Shariff Md <smohammed@...dia.com>
To:     <smohammed@...dia.com>, <wsa@...-dreams.de>,
        <swarren@...dotorg.org>, <thierry.reding@...il.com>,
        <gnurou@...il.com>, <linux-i2c@...r.kernel.org>,
        <linux-tegra@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <jonathanh@...dia.com>
Subject: [PATCH v10 1/4] i2c: tegra: use readl_poll_timeout after config_load reg programmed

After CONFIG_LOAD register is programmed instead of explicitly waiting
for timeout, use readl_poll_timeout() to check for register value to get
updated or wait till timeout.

Signed-off-by: Shardar Shariff Md <smohammed@...dia.com>
---
Changes in v4:
- Split timeout calculation to separate patch

Changes in v5:
- Move disabling of clock to separate patch

Changes in v8:
- 1st change of [PATCH v7] series is merged, v8 is rebased on top of
  merged change, here patch series is changed accordingly.
- Updated the commit message as per review to properly reflect change.
- calculate the register offset seperately to make code more readable.

Changes in v9:
- Use readl_poll_timeout() instead of readx_poll_timeout()

Changes in V10:
- Rebase on top of [PATCH V2 0/9] Some Tegra I2C Updates
---
---
 drivers/i2c/busses/i2c-tegra.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index d86a993..5eb37ab 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -30,6 +30,7 @@
 #include <linux/reset.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm_runtime.h>
+#include <linux/iopoll.h>
 
 #include <asm/unaligned.h>
 
@@ -112,6 +113,8 @@
 #define I2C_CLKEN_OVERRIDE			0x090
 #define I2C_MST_CORE_CLKEN_OVR			BIT(0)
 
+#define I2C_CONFIG_LOAD_TIMEOUT			1000000
+
 /*
  * msg_end_type: The bus control which need to be send at end of transfer.
  * @MSG_END_STOP: Send stop pulse at end of transfer.
@@ -448,7 +451,6 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 	u32 val;
 	int err;
 	u32 clk_divisor;
-	unsigned long timeout = jiffies + HZ;
 
 	err = pm_runtime_get_sync(i2c_dev->dev);
 	if (err < 0) {
@@ -497,15 +499,19 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 		i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE);
 
 	if (i2c_dev->hw->has_config_load_reg) {
+		unsigned long reg_offset;
+		void __iomem *addr;
+		u32 val;
+
+		reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_CONFIG_LOAD);
+		addr = i2c_dev->base + reg_offset;
 		i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
-		while (i2c_readl(i2c_dev, I2C_CONFIG_LOAD) != 0) {
-			if (time_after(jiffies, timeout)) {
-				dev_warn(i2c_dev->dev,
-					"timeout waiting for config load\n");
-				err = -ETIMEDOUT;
-				goto err;
-			}
-			msleep(1);
+		err = readl_poll_timeout(addr, val, val == 0, 1000,
+					 I2C_CONFIG_LOAD_TIMEOUT);
+		if (err) {
+			dev_warn(i2c_dev->dev,
+				 "timeout waiting for config load\n");
+			goto err;
 		}
 	}
 
-- 
1.8.1.5